22 cal Huben K1, like new, purchased from Krazycool about a year ago, Hard case and bipod included. Asking $1450.00 shipped
scope not included, Include 6x24 X50 Bushnell Nitro scope for $250.00

This gun is about a month old. I bought it brand new and right now I have it tuned to shoot the JSB Redesigned 25 grain pellets. I can hit acorns at 50 yards with it.
It comes with a superior heavy slug liner 3 magazines, an NSA pin probe, an extended Arca rail, a UTG bipod, the original case, and the Donny Moderator that came with it as well as the Impulse air moderator that’s on it now.
$1900 shipped

Welcome to EBR 2022!

Penchetta Pen & Knife is having a great EBR sale from Oct 3rd thru 5th. So if your in town for the shoot, come by and visit the other air gun shop located 1 hour northwest of Rio Salado Range in beautiful Cave Creek, AZ .

We have a pretty good supply of pellets if you run short or forget to bring them! All guns on sale FX, Daystate , RAW, Edgun in stock.
Special 20% off on ALL Benchmade , Spyderco & ZT knives made in the USA.

We will be open from 9am till 6pm on the 3rd-5th , then closing the 6th thru the 9th for EBR. Look forward to seeing you. Travel safe , shoot well.

Penchetta Pen & Knife
4705 E Carefree Hwy Ste 104
Cave Creek, AZ 85331
480-575-0729


Penchetta Pen & Knife

Looking at a new FT gun. Options:

Daystate wolverine

Daystate red wolf ( not a fan of the electronics though,)

RTI Prophet

All in 177.

Comments? Thanks.

I'd like to know the logic behind why dovetail rails are still a thing?
Why hasn't the more modern and more secure picatinny rail simply replaced all the old dovetail machining in airguns?

Kinda of apples to oranges , But I heard you say H&N Mine is 177 Uragan is my H&N pellet gun just because I got so many H&N 177 10.65 grain, Gun has always been a super accurate gun, for over a year shooting the H&N Then gun started shooting all over the place coffee can size groups at 48 yards, Open a can of redesigned H&N same thing cleaned my barrel again,, Dam I thinking some wrong with my gun.. Picked up a can of my Vulcan gun JSB pellets EXACT HEAVY DIABOLO 10.34 gr. One ragged hole at 48 yards 15 shots, loaded another magazine same thing,, Something changed from one can to the other in the H&N pellets, I even opened up two more new H&N tins same thing,,, So its not my gun its the pellets.
Not sure I am going to buy any thing H&N again, I just got to many pilling up in the back of my pellet cabnit Just add the 177 back with the 22 and 25 H&N tins of pellets my guns don't shoot ,
Mike

**Sold pending funds**Sell $275 usps money order or cash only OR trade for genuine atlas with QD pic mount

Maestro is the name of this cool things for FT - https://www.maestro-design.co.uk/home/

This makes changing regulator pressure quick and easy.....without taking the gun apart. see attached, drill dimples (I used a Dremel) in the regulator - paint in the dimples (I used the wife's fingernail polish) - drill the dimples to align with the pressure marks taped on the regulator body - and one on the adjust valve. Now, all ya need to do is drain the air from the chamber - unscrew/remove the air gauge from the end of the tube and insert a long screwdriver to adjust, (i adapted a screwdriver apex to fit my Dewey cleaning rod) might need some light to see... insert the screwdriver down the tube and twist to desired setting. using the dimple's to align to your desired pressure. It don't get any easier than this guys.

I was in the middle of re-tuning my 25 caliber FX Maverick when I heard my bird feeder being raided. I turned and looked, surprised to see my very first black squirrel. Unfortunately for Mr. Squirrel I don't take kindly to them destroying my feeders. Typically hades are my go-to small game pellet but since I was in the middle of tuning, my mag was loaded with FX 34's. He took one to the dome at about 30yds, complete pass-through of course.

Like new huggett belita 177/22 moderator, works very well and extremely compact. Just sit in my parts bin so time to let it go, $130 shipped.

I was wondering if the .22cal Maverick can be tuned up like Matt Dubber's .22cal M3 Impact. I really like the idea of the Maverick, but before I buy one I need to make sure it will meet my needs. Any info would be greatly appreciated!

just kidding lol
of course it doesnt.

this is the crown on a beeman 1357 .177 i got some days ago.

kept wondering why it shot so bad till i took a closer look at it hahaha

sending it back in the morning

I understand the edgun leshiy is the predecessor to the leshiy 2. But I feel the biggest thing they have in common is that they both fold. Is the lelya 2.0 next? I wonder why Ed and team decided to get rid of the awesome simple little platform .
No genuin concern here. Just curious on anyones thoughts or anything I may have missed on the stop of production. I have considered a lelya 2.0 in .25 but only if I got rid of the classic !

I have for sale a very lightly used Talon Tunes AGT Vulcan 3 .30 caliber 700mm I purchased from AGN user “Adam” on the classifieds last July 2022. He had lost his job and I jumped in to help out by buying his airgun at his asking price. Others here on the forum have helped me out in a similar way. Adam had put a few hundred rounds through the airgun to do some slug testing. He found the Zan 49gr to shoot well. I have never shot the airgun and never changed his tune. I had planned on setting it up for the AVS 61gr flat .3063 slugs, but didn’t get to it yet. The Vulcan 3 is in perfect condition. See Adam’s description of the rifle attached also.

Here is a direct link to Adam’s original add - https://www.airgunnation.com/threads/agt-vulcan-3-30-700mm.1269528/

Price is $1350 shipped CONUSA. PayPal Friends and Family. Or $1400 shipped CONUSA PayPal Goods & Services. No Trades at this time.
**Scope, mount, level, foregrip not included.

I have a new box of Zan 49gr slugs and several new boxes of AVS 3063 slugs for sale to the buyer at a nicely discount if interested.

**SOLD** I have for sale a very lightly used Charlie Frear tuned Kalibrgun Cricket Carbine .25 caliber I bought off Wolfmangreg a few months ago. Here is his post.


I have had it stored and never was able to get out and shoot it. Still in new condition and only has ever been fired by wolfmangreg. Here is a link to his excellent review of the Carbine.


Price is $1040 Shipped CONUSA - PayPal Friends & Family. $1080 Paypal Goods & Services Shipped CONUSA. No trades at this time.

**Scope, mount and level not included.

$1375 PPFF (SOLD), plus half shipping or in person pick up around Wayne County, Pennsylvania

This is my second Impact. I'm only using my 700mm 30 cal and this one hasn't been used in almost a year.

The mods that were installed are there to make it extremely versatile. With them, it can be tuned for a wide variety of applications, projectiles and power levels.

Huma regulator
Huma gauge
Pin probe
Brass hammer

Currently the regulator is set at 130 bar. Some cosmetic marks on the handle and where the scope was installed.

You know…I’ve always been quite spoiled with higher end PCP rifles. It’s my own money of course, but all four of my past PCPs have been .25 cal FX rifles and all cost me a pretty penny. But a few days back I thought…hmmmm…you know I’ve never tried the rifles that are cheaper and yet produce the same power. So I put some money down on a Kral Arms Puncher Bighorn…it’s in .25 cal and it’s allegedly producing 60 foot pounds which means it’s pushing 34 grain JSBs to around 900 FPS just as my Maverick is tuned.

A brand new $630 PCP producing the same power as a Maverick…means I paid about $1000 less for the same performance right…? Well, we shall see. I want to be an unbiased judge for this. I have seen no discussion on the .25 cal Bighorn…only .357 cal. Will update.

Hi, could i ask for recommendations as i,m looking to add to my collection a high power .30 cal long range pcp (long range being 200-250m) i have a .30 cal leishy which I don’t like i just cant get on with the heavy trigger, I have a fx impact m3 .25 cal running 85 ftlbs and a V3 22 cal at 80 ftlbs which i have to say is like a laser out to 100yds i use this a a night hunting tool fitted with a pulsar thermal scope, i,m torn between the new options but the prophet is swaying it based on all the reviews i have seen can anyone advise ?? Sorry for got to add i only shoot slugs…

ALL THE PARTS YOU NEED TO CONVERT YOUR DREAM LITE TO A TACTICLE BUFFER TUBE TOP RAIL BOTTOM TRIGGER GAURD POWER PLENUM BOTTLE ADAPTER FOLDING STOCK ADAPTER PLUS NICE REAR BUTT STOCK PARTS ARE ALL LIKE NEW WITH ALL THE MOUNING SCREWS THE BOTTLE ADAPTER IS 139 NEW AND ITS NEVER BEEN USED AS IS THE 30 DOLLAR POWER PLENUM 275 SHIPPED

I was looking at my collection of pistols and rifles last night.

I have a lot of pistols, both vintage and newer, in springer, SSP, CO2 and PCP and I enjoy the hell out of them probably more than bull pups/rifles. Most are in .177 with a few in .22. They scratch my pistol itch and I’m pretty good to very good with all of them. I really only keep my eyes out for used pistols that are essential to me a vintage pistol collection. I scored a S&W 79G last night in the Classifieds and before that a Walter LP Model 3 from AoA.

On the airgun side I have three .22s that really cover any and all scenarios from 20fpe up to 65fpe. A few big bores that cover from .357 up to a .72 16” Zeus.

But I only have one .177 rifle which is more on the HP side of things and runs very happily in the 18-28 fpe range.

What I am looking for is this - a mid-tier compact .177 rifle. My criteria for Compact means I’d like 25” or less before adding any additional moderation. There are two right now that meet this criteria:
- Taipan Veteran .177 Compact from Utah Air (doesn’t seem like anyone else stateside offers a .177 Vet in Compact)
- Edgun Leslie Classic .177/250mm

Some options that I have already ruled out:
- AGT Uragan / Uragan 2 Compact. I’ve owned three compacts in the past and although they are excellent airguns I’m just not feeling another one.
- FX Wildcat III - I’ve already had one in .177 and it was excellent for the first day and then it was nothing but POI shifting. I’ve also seen a good number of threads on here that FX in .177 isn’t delivering to expectations for many.
- Pistol Carbine setup - looking for a full rifle, not a conversion.

I am very open to other suggestions. Please let me know what I might be missing.

Hey guys just made this account to hopefully ease my anxiety. Just got a hatsan 135 vortex qe carnivore .30 cal gas piston air rifle from pyramid Been doing my test shots to make sure it's all good and shooting properly. Only spaced loading a pellet into it a single time and immediately knew I dry fired because it was loud lol did a bunch of research on the possibility of how much I could have damaged it. I'm getting a bit of a burnt smell but am not sure if that's just factory lube dieseling off and obviously my anxiety makes me think the worst. The gun is still seeming to fire properly but I didn't have it long enough to know for sure if it's deviating from any baseline. I know a single dry fire should probably be fine and I don't plan on doing it again obviously but am just curious what you guys think? Thanks a bunch for any help in advance!

I have a Leshiy 2 repr that I installed a 500mm .30 FX Barrel with huma adapter and superior liner installed. It’s currently shooting 44grain jsb pellets at 860fps with reg at 150b. Lots more power on tap, just didn’t need it super powerful.

Has carbon fiber handguard, with utg recon Malcolm bipod legs attached. Comes with 1 mag, jkwan scope rail mounted mag holder, and fx impact shroud on barrel.

Asking $2000 shipped east of Mississippi. Shipping a little pricier to go farther, but can work something out.

Moderator, scope, and bottle not included.

Thanks for looking.

Anybody else check their first shot POI in preparation for hunting season? I got new P35s in 177 and 22 caliber and have been getting them ready for our October 1 opener for small game season. I adjusted the zero to an estimated 38-40 yards (can't shoot past 33 in my yard) and found the POI was moving a bit day to day. The 177 has been fine for several days now so I am confident in it. The Athlon 6-24 on my 22 was scaring me but yesterday it was the same in the afternoon as the morning and this morning it was still the same. All were slightly low for 25 where I check when it's windy as it is today. So I turned it up a few clicks and seem to have it dialed in. Now if it holds that when I check after lunch I think I may use it first. Saturday is looking bad here due to Ira but I should have a chance to get out early next week.

My scopes all cost about $200 so they are definitely not high end. They work fine. But sometimes it seems to take them awhile to settle after adjustment. So I like to take them out and shoot a few shots once or twice a day to make sure they are staying sighted in. If it's windy like it is today I don't worry if the impact is a little in the direction the wind is blowing but if it moves opposite to the wind or moves much in elevation I start to worry a bit about the scope. The POI on the P35-22 initially moved due to the shroud moving forward allowing the shorter hair curler to tilt and get in the way of pellets causing clipping (I had an issue in the shroud). I turned the Athlon all the way to the limit down before I figured out it was clipping. But after I fixed the shroud and resighted the first few checks had the POI moving an inch or so at 25 yards - a lot. But after that it has been at most a few clicks off.

I enjoy finding an accurate pellet for new rifles and on the P35s changing the shrouds to make them quiet and checking penetration in wet paper of the pellets they like. All part of my process for "getting ready". Verifying first shot POI is about the last step for me.

Well apparently the taipan stocks from 2015 were milled a little different than the new ones and the tolerances just wouldnt allow the supervet to line up in the new stock so I put it back in its original stock, I don't have the balls to start working on the stock he just refinished to get the supervet to fit...

The pics dont do the work that was done to the stock any justice the color is very very nice

Anyways

Huge shout out to Eddie ( @Cannonball ) for his work on the night time taipans stock

He stained it , his choice that I rolled with and I could not be more pleased just look at it