Selling a .25 Cricket for $450? And another just sold it for $750 2 months ago?


Also 3 other adds that were just sold.

DON'T FALL FOR IT.

Mods were notified

I have the itch. I have had it for a long time really. The Evol line of guns has to be the only line of guns I would probably trade everything I have to buy. Not because I’ve tried one, but because I haven’t heard a single complaint about one, and they are super well suited for the type of shooting I do. I have an awesome collection of airguns, but he Evol has always been out of reach due to price.
My question to the owners is, is it worth me selling my collection to get one? Are they THAT good??
Please talk me out of doing something stupid. lol.

Hello Everyone....I am a Long time lurker here with my first post!

I quickly tired of pumping my Marauder with a Hill Hand Pump so I have decided to buy a compressor for personal use, probably 1,000 pellets or so a month

Since budget is a concern, I narrowed my choices down to an Air Venturi Nomad on the high end, and Hatsan Spark on the lower end of the price spectrum, and I would consider anything in between

I am not opposed to spending the extra money on the Nomad BUT I have been looking at reviews and there are negative comments on pretty much EVERY compressor. I don't want to spend $300 on the Hatsan Spark and have it fail, and then have to go for the extra bucks for the Nomad....then again if the Nomad isn't that reliable, why spend $800 for it in the first place as it might fail as well.

Bottom line is that I do not have any experience with any compressor so I am hoping that some of you here can point me in the right direction.

I know that ANY mechanical device can and will fail at some point and I am mindful of that but I am hoping to make an educated decision from the get go and buy right the first time.

Thank You Everyone!

Bsa ultra jsr in .22
1 mag
1 fill probe
Truglow scope
Not been shot much
I give it a 9.5 out of 10
300$ via paypal

I am a USA distributor for the custom FX Impact Laminate kits.

The Kit will includes Grip, Butt, Cheek rest, and Cocking Handle.

After all these are sold out I won't be their distributor anymore.

The Kit is $200

The Grips is $135 .
$125 Shipped

Grips available left:
4 Green
3 Blue
2 Red



These will Takes your FX Impact to another level!

All will be shipped Priority Mail with tracking #.

Will accept PayPal, Friends and Family, or normal PayPal with buyer to pay 4% fee.

CashApp, VENMO, and ZELLE.

If you have any questions, you can contact me @ 504-231-2466.

Thanks for Looking,

Andy

This is a feeler as I am not sure if I am ready to let this go but this hobby makes you want to try and test new things. This is a Ernest Owned gun that I bought from him it's a mk2 that has been upgraded to some of the m3 items like the 720 plenum, acorn valve knob all installed by him. I put the trs rail and the Saber Gen 2 arca rail on. It's a .30 700mm and 580cc bottle with a new superior liner Ernest dual transfer port carbon liner sleeve, fx barrel clamp and tensioner not installed it can include. Will come with 2 mags one with an orion insert. I also have a slug A and a superior heavy liner available pick and choose are take them all if we can work out a deal. This is a 100-120FPE gun. Any questions just ask. What am I looking for honestly I don't know uragan, cricket tactical, no electric triggers but open to see whats out there let me know what you have.

They seem to be the same price and weight but which would you pick ? I just plink so nothing serious .

Please share your
Caliber
Pellet or Slug Grain Weight
Pellet or Slug Speeds
Reg Pressure
Hammer Screw Depth

Hi guys.

Any owners of the Uragan 2 that can provide feedback on them?

I am looking to get one in .22.

Would love to know how current owners find them.

Also, how does it rate against the RAW LRT. Especially as a 100yard gun.

A while back some one put together a order of HW50's in .20 caliber.
I know they are all gone, but any chance there is enough of us that want one, they will do it again? Or maybe a HW35 in .20

tim

I have an fx maverick vp .25
Looking to shoot further with more accuracy and energy.
I have a regular tune from Utah air that was set up for JSB exact king .25. Currently gun is very accurate. Gun is shooting about 935 fps with the JSB pellets on power wheel 3. I can turn wheel down but not up (pressure drops off when I go up )

Wondering if I can get good accuracy, energy with slugs or hybrids without changing a tune?
If anyone has experience with this I’d love some advice. I would prefer not to mess with the tune.

What speed do hybrids shoot best at? What kind will work best?

If I have to raise reg pressure to get higher power with reg setting and getting power wheel to go higher I’d just as soon keep current setting as I do not feel super confident that I won’t mess something up.

My ultimate goal would be to shoot a hybrid or slug accurately from 50 to 200 yards. Since the pellets I shoot get affected a lot by wind where I am at on distances over 100. My main use is hunting/posting small game.
Thank you in advance

New breech seal, a new spring, and she was ready to go. 30yds out, 20ft up in a tree and the Diana put it right where it needed to go. The more I shoot this gun the more I love it.

Like new FX Maverick 22cal 600mm barrel. Great shooter.
Price is $250 shipped via PP FF or 3% or MO.
**Trades considered on FX Crown MKII 22 or 25cal barrels in 500mm version
or a Maverick 25cal 500 or 600mm Barrel for those with 10+ Feedbacks or more.

Leuold 35x45 Competition with wide Mildot reticle. Dot spacing measured at 2 MOA leaving 10 MOA of holdoff each side of crosshairs.

10 yard parallax. Box not original to scope. Leupold lifetime warranty.

$1,000 plus shipping. Payment negotiable but prefer personal check.

K

Like new . Less than 100 rounds fired . 2 clips, fill probe . Love this rifle. Precise and laser accurate. Comes with original soft case . $1500 obo . Contact for pics, video chat and any information . Ships from Ft. Lauderdale, Fl. contact mike m.

When you purchase a FX rifle from Utah Air do you have them do the basic tune and function test or leave it as is from the factory? Thanks.

This bulldog has been tuned for power and accuracy. I dont have all chrony numbers for the ammo it likes but polymags shooting at 1040 and a great group at 60 yards. I shot the 90 grain NSA slugs at 1000 and grouped very well also. THis does not have the heavy hammer spring. It was all polished and tuned without adding extra parts. So if you wish it can still add more power with a new spring and porting, but isnt needed. Only selling because I have a Taurus and this guy doesnt get shot as much anymore. Comes with the DFL adapter and 6 airbolts which it shoots great also. looking to trade for a .30 cal bullpup. I will add cash to make up the difference if your trade is worth more. Scope, rings and emperor doesnt go with this trade.

I've never had a regulated gun so I'm totally ignorant on the matter,

Yesterday I noticed the Regulator gauge was showing same pressure as the airtank gauge so I filled the gun to 250 BAR and to make sure it's was not the gauge I tried to shoot with the Hammerspring completely backed off, and sure enough I got definite valve lock with 2 extremely slow shots.

So I turned the Hammerspring at max and she shot fine basically like an unregulated gun,......I could just leave it at that and I would be completely happy but on the other hand this could be the perfect situation to learn how to work on regulators.


I will take any tips, instructions and so forth, will listen and then try see if I can do something about it.

Thanks in advance to anyone that is willing to contribute.

Hi, I browse here occasionally, have signed up as a member, and now wish to post a few items for sale. The site says I have no accrued enough “ privileges “ to post. How can I get some items listed?

So this guy started popping up in my yard about a month ago. Digging under my walkways, in my grass, and chewing on my sprinkler lines. He always seemed to disappear when I grabbed my gun though. But today that all changed. Today I looked outside and I saw him, then he saw me, then we played cat-n-mouse for about 30 mins around the yard. Because it's been cold and raining for the last few days he was more than eager to keep coming out to get some sunshine. He finally settled on a wall long enough for me to get a shot from standing at 25 yards. Got him just right in my cross hairs, squeezed the trigger, and let the 22gr FX Hybrid fly out of my brand new M3 Compact.
I have to say, I am very impressed and satisfied with the performance of those FX Hybrids in 22 cal. Hit with authority, no pass through, and lights out instantly! Perfect for back yard pesting

Okay well, the saga of trying to get a replacement Ranger XR continues. (last one new off the shelf was rusted)

Tomorrow the replacement Brocock Ranger XR in 22 WAS supposed to arrive tomorrow morning, after 3 weeks back and forth.

Well, today I got a call from AOA and well, they screwed up and sent 2 guns to me (someone else's order) and vs just letting me get mine and send the other back they recalled the whole order. The guy was apologetic, but wouldn't give me a fixed date on when I would get the gun I have already paid for, 5 weeks ago.

Right before the "sike" you have to wait one to two more weeks for your gun" phone call I had put in a pre order on a Ghost carbine in 177 and I would switch out the Uragan because I want a slug shooting 177, and @SorenDrost shows it can do it. The only consolation I got from AOA is they would try to expedite the order, but wouldn't send me a gun on the shelf, I had to wait for the one in transit.

Now I am considering just cancelling the order and get the Ghost instead.

Since getting rid of the perfectly functioning Ranger XR in 177 this has been anything but smooth to get a trade in Ranger XR in 22.

Hey guys! Took my new .177 Field Target out for its maiden voyage today at the weekly Tuesday “Old Geezer Match. It was set up at 26yds with a 1” KZ reducer installed and was shot with 12 FP Springers and 20 FP PCP rifles. It worked perfectly. Then at midway it was moved to 53 yds and reducer was removed and then shot at with the same rifles. Again it worked perfectly. Was easy to reset and when paddle was hit it went down.
The reducers are installed on the outside of the faceplate as per AAFTA rules.
I don’t have a video of it working but it is very reliable and showed no damage at all.
I will start making more of them and can cut almost any design for the faceplate.
Contact me if you are interested in them. They are high quality and are not the least expensive targets available.

Pyramid has free shipping over $49. That is three tins of JSB pellets these days, not a bad deal.

OK, I'll admit it. I'm somewhat of a geek, and all my guns are named... How about you? I'll go first:

.30 FX Bobcat Mk2 - Reaper
.30 Daystate Delta Wolf - White Fang
.25 FX Impact slugger - Death Dealer (it really likes schwacking ground squirrels long range)
.25 Daystate Red Wolf HP - Bullseye
.22 Daystate Red Wolf HP - Bleu
.22 Cricket mini Carbine - Gonzo
.22 Edgun R3 Long - Eddie (yeah, I know, not very original)
.177 Daystate Pulsar standard - Alpha Wolf (named WAY before DS came out with the Alpha Wolf platform)
.177 FX Dreamline Classic - LeStat
.257 AirForce Texan - Reacher