Like new STEYR PRO X .22CAL.
Like new, 3 magazines and everything that comes with the rifle new. Very few rounds through it. Barrel is threaded for moderator of your choice. The Impulse Air is NOT INCLUDED.
Rifle $2500.00 FREE SHIPPING TO LOWER 48. OFFER UP$
Shipping, actual cost to your location.
Please call or text me @ 208899380three.
Don't get on here as often as I'd like, phone will be quickest response.

Selling because I prefer our side lever guns. Like the simi auto but just not really for me, lots of fun though.

Thanks, Phillip

Looking for something comparable to rimfire performance, but it seems these higher powered airguns are larger caliber. Have an avenger in 22, but I doubt it would possible to hit even half that, with modifications.

Any recommendations? Appreciate any input.

I am deciding a new gun for next year and I have narrowed down the brand of airgun to FX and AGT. I know that AGT is more of a point and shoot gun. While FX is a tuning gun. The specific models I am looking at is the FX Panthera, AGT Vulcan 3, and the Uragan 2. Between these three what one would be better. This is a short to mid range hunting rifle. 0-100 yards range. .22 caliber. Biggest game that will be taken is groundhogs or rock chucks. Weight ten pounds or less. Also want to be able to shoot pellets and slugs with minimal changes.

It was maybe last year, but I recall there was a US-made PCP that was full auto iirc and getting ready to launch, what was it, and did it not get sold?

I thought AoA was the exclusive reseller?

I'm use to Huma mods, but never had a DonnyFL one, so are they the same and your opinions?

We had our 1st and only N50 match in October which was a blast BTW and so much so that we have 7 additional sanctioned matches scheduled for 2023 April - October. After our event I polled the shooters as to what we could do to improve future events and the most requested was to add or incorporate a 100Y event too. Initially in 2023 we are going to offer the standard 3 card N50 match plus an additional 2 card 100Y match following the N50. We will try this for the first couple of matches to see what the consensus is from the shooters before we commit to adding this for the remainder of the matches. As suggested by Mike we will be using the following and slightly more forgiving 200Y targets for our 100Y event:

I have been combing through the AGN reading threads while I ......... patiently ......... wait for my Thomas to arrive sometime in the spring of 2023. Initially I had planned to dedicate my HPX to 50Y events and use another rifle for 100Y but it got me wondering if any of you 50Y BR shooters are or have used your Thomas for both distances? Other than knowing your scope dope adjustments ahead of time, what would one do to prepare the same Thomas rifle for both distances?

Mike, if you are reading along, do you do anything different to the rifles that you have experimented with at both distances? I vicariously have read through your 100Y threads and wondered if yours was a 100Y only purpose built rifle or were you just seeing what your standard BR rifle was capable of at longer distances? I wonder if Jeff Hernandez does anything particular to his Thomas to prepare for both distances?

Just to be sure they don't over charge you. Was looking to upgrade my rifle rest on my back yard air gun bench. One of Nebraska's home grown sporting good stores Scheels had the Caldwell The Rock Deluxe Front Rest Combo Adjustable Ambidextrous Rifle Shooting Rest with Front and Rear Rest for Shooting at 99.99 just 4.00 more than Amazon. I had a hundred dollars in gift cards, so I bought it. The 99.99 was a sale price. So I am on Caldwell's site for some information about said rest, and low and behold there everyday price is 89.99. So I called Scheels customer service and got a price match. Now I see that the Lyman target advancement stand in the below thread is on sale at (I thank the poster showed 79.99) on amazon but turns out it is 50.00 from Lyman direct. I will form now on be looking at the manufactures site before I buy anything else. So who holds the fault here? The manufacture for underselling there stocking dealers or the stocking dealers for price gouging?

tim

Hi, I rebuilt my Impact M3 2nd regulator using bras piston. But after reassembly it leaks quite heavily (hissing).
What could I have done wrong?

First up is my Airmaks Caiman, totally surprised me when I tested it after first buying it.

I havent done a true shot string till I have seen fall off but I am getting at least 25 shots per fill off this tiny rifle .It is shooting .22 hades at 880fps with crazy good accuracy out to 65 yards (max I have tested it, full mag in a quarter sized hole)

I have it equipped with a bugbuster 3-12x32 which focuses down to 3 yards, a donnyfl sumo, and an armageddon single point sling. Such a handy rifle! Looks good too



Next up is my AGT Uragan .30

I have yet to take anything with this rifle but that is due to a few permissions getting cold feet, I don't blame them, to give someone permission you barely know access to your property to shoot is a BIG DEAL, either way I have some coyote permissions in the work and that is where this rifle will shine. It is very short at 32 inches total, quiet enough to not need a suppressor and putting out just under 90 fpe out of the box and is easily MOA at 100 if you were to do your part.

It is shooting JSB 50.15 knockouts at 875 fps for about 4 magazines which is about 36 shots. This rifle is a heavy heavy hitter and only 32" in length

It is topped with a US Optics TS12x and USO level, I typically shoot this rifle off my qd br-4 g2 accu-tac



Last but not least my favorite that doesn't get shot much

Its my Taipan .22 Compact in an original mutant stock

I have used this to take rats as well as birds, its often atop a tripod fixed position for my ratting permission but it does come off and get shot off hand or off tractor hoods etc, very versatile tool that is incredibly boring to shoot, I haven't pulled it out in 2 months, makes me sad but I just am not wowed when I shoot it, its very monetonous and does the exact same thing time and time again without fault. It was even dropped from 5 feet and it changed nothing lol

It is shooting .22 hades for about 40-45 shots at 880 fps I have shot this rifle out to 115 yards breaking 4 inch clays with ease shooting 18.13, not sure if it would group well at that yardage but doesn't matter as I will not take a shot on an animal with it at that yardage.

Its equipped with a Sightmark Wraith 4k mini with external battery pack, a huggett atom moderator (not needed but makes this thing a whisper) , and some 3d printed goodies.

Mint Black Laminate Sporter stock with both sling studs, adjautable butpad, Pre Air Force HM1000X, #1610, .25 action, freshly resealed, 20 MOA pic rail has wear w .20 barrel kit and mag per caliber. I Miss my Evol, need a 22 PCP, have 3 RAW’s and just hit my head and an idea fell out!!! I might regret this and relist as before ....action, stock FS but no barrels. Bottle available also. This was one of the very last actions preAF merger at #1610. Has thinner holding port so the .20 mag will need to be sanded to fit as it’s the newer wider model FYI.
Will trade for minty AAA Evol .22 OR minty preAF HM1000x Thumbhole Laminate stock with check riser in red, yellow or blue in 22/25/357 w mags. Anywho I might wake up in a sec and regret this and pull the ad but if it’s up let’s see what can happen. Each pays shipping. Thanks and Merry Christmas.
Working on better pics..sorry. More I look at it more I get queezy lolz

Keahi

As a recreational precision .22 rimfire shooter, I know how important ammunition is to repeating precise shots, but I'm new to the PCP world. With my rimfire rifle at the range I'm content shooting one ragged hole at 50 yards, and I'd like to get there in my 20-yard backyard range with my Gamo Urban. When I opened my first tin of JSB Exact Jumbo Diablo 15.89 pellets and saw most of the skirts were bent I was concerned. But should I be? I don't know what I don't know and am hoping for some guidance from the more experienced airgunners here. I read a lot of information, watched a lot of videos, and considered a lot of tools. After all that I narrowed my plan down to one of two strategies:

Strategy 1: Reshape and resize the skirt. I could buy into this if it results in better accuracy. Here's a video showing an affordable, easy method.

Strategy 2: Just shoot them as they are. According to Tom Gaylord (who seems pretty credible) in this Pyramid Air blog, Tom says most high-quality adult air guns have choked muzzles that squeeze the pellet by one-half of a thousandth of an inch at the muzzle. That automatically sizes all the pellets and negates any other sizing efforts.

Your thoughts?

So I'm making a drop block build and was wondering if the little paintball regulators for the bottle has any plenum area?

Trying to see how much plenum I have with this setup. Wanting to get 20 fpe max.

14.5" 22 barrel
Reg set at 1500 psi
250cc bottle
250 bar fill

This is what I'm working with. Has maybe 1/4" passages about 4" total length. Screws directly into valve.

I have a Yong Heng for a while now. Just to much trouble to use for a fill or two. So I bought one of the GS-CX2 portable 12 volt/110V compressor. It worked really well especially for it's size. It was a little slow but not a real issue. The issue I had with it is no automatic cut off. You had to baby sit it. So I returned it for the larger GS-CX3, this one has the automatic cutoff but the power converter is a separate piece as well. Unboxed it and got ready to use it. Pushed the on button, nothing. No power to the power button. The converter powered up and ran fine. So e-mail the vendor for a retune and a replacement. Return no issue but he was out of stock on the compressor. Nearest price on the same compressor was 125.00 more than what I paid for the dead on arrival one. So back to the drawing board for some more research. All of these look to use the same or like same compressor under the cover. So I picked one form Toauto https://www.ebay.com/itm/383998374016.
It has a couple of different features that I like better over the GS-CS3. One button for on/off. Built in converter and digital display. It powered up right out of the box. Have not aired up any guns yet, will get to it tomorrow.

tim

Took "Headbanger" (380mm 22 crown) out today and shot collared dove....time to get them all cleaned up and ready for the family over Christmas. I will breast them out then put a pickled Jalapeño between the breasts, wrap them in bacon, then onto the BBQ they will go...TASTY!!!!

Birds were from 50 yards to the long of 97 yards. Most shots were 50-70 yards though.

Tony P.

Selling my bullpup, has a few hundred pellets through it. Includes two magazines
price 225.00, freight included

5 Head shot and 5 hart shot at 100yd

I’ve asked this before in a different way-
Why can’t I get more consistent string on my shots. Wide spreads on the shots usually caused by 1 or 2 high or low velocities. The gun is compact, 500mm, .22. 1st reg at 130, 2nd at 105. Shooting FX15.89 pellets. PW set at 4 and ihs at about 3 turns ( I’ve varied the ihs only slightly 1/8 turns). Got maybe 4000 shots thru it.
Here are just 3 examples/strings-
Why would I get 1 or 2 random shots, 30 or more fps from the average. I want to go out to greater distances but I know my accuracy will suffer. At 25 I’m inside of a quarter inch most of the time. If it’s ever more than 1/2 inch it’s my “error”.
Help!!
I have looked and polished the sear, the idea of a hammer that might have a nick in it, I’ve gone up and down on pressure of 2nd reg and varied the hs til I am blue in the face. I must be doing something wrong soooo……
I would appreciate a few things to try from more knowledgeable folks on this board.

Hello AGN,

I'm looking to sell a very nice 600mm 0.22 caliber FX Impact MkII Black w/ 1 magazine, FX stackable moderator, Huma high flow transfer port, stainless steel bolts, FX foster fitting and factory FX hard case. This Impact is an excellent shooter and is currently set up with the regular at 80bar to shoot the JSB 18.13g pellets through the 600mm Superior liner at ~920fps with excellent accuracy. Rifle is in excellent condition as shown in the photos; it holds air and functions perfectly. The shroud and cheek rest has been carefully wrapped with a carbon fiber vinyl wrap that can be easily removed if you don't want it. Rifle also has a stainless steel bolt kit carefully installed w/ anti-seize compound (original black screws will be included as well).

Price is $1430 delivered to your door

[Scope and rings shown in the photos are not included...]

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have quite a bit of feedback here as well as dating back to the Yellow Forum so rest assured that you're dealing with a reputable trader.

Hello,
I have a crossman p1322 22cal air pistol.
Unfortunately it doesn't have the power i need.
Im using crosman premier hollow point 14.3 gr. Pellets and they do not penetrate well.
Can someone recommend a better pellet for this gun ?
Also i want to know if there is a more powerful pellet pistol than mine other than co2 type.
Thank you.

SO we dont have to hunt down our responses and new arguments discussions about them

Lot of good info about the gun, and some good debates about the whys/why nots regarding it. All good fun reading!
Just be easier if they were in one spot for a while.....

Hello guys
All my guns are European brands Edgun / Cricket - these I know enough info about.. I like to shoot with power

I am new to FX world. Trying to do some shortcut - picking your brain/experience

Just gut myself Maverick Sniper .25 (knowing that M3 is slightly more power out of box)

Can anyone tell me what is the max power/speed Maverick could be toned with? 25/30 cal ? Can it be adjusted to move -for example - 38 grain slugs over 900 fps in 25 cal?

Hello AGN:

I have an FX Impact / Maverick / Crown 0.25 600mm pellet liner that I would trade for equal value for any of the following items ($$$ added on either side as needed):

• 0.22 JSB or FX 18.13g pellets
• 0.22 or 0.25 JSB Hades pellets
• Original ALUMINUM (not plastic) Impact Side-Shot 0.22 high capacity magazine
• 600mm 0.25 carbon fiber barrel liner

If you'd like to purchase the 600mm liner outright, it's $85 shipped.

I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

After opening the nice, somewhat heavy plastic case, looking at the gun...I thought...nice !

But when my hands started "caressing" the frame and the bolted, part to part fitup, A mild depression set in ! First thought...If I were the designer, I'd be embarrassed that the part fitup is so bad. I even loosened the lower trigger guard to better center it on the main block...no-go, it was already as "centered" as it was going to get. That is without a bit of file work !

Lets hope that the main block and the rear piece of the frame can be better centered by loosening some fasteners and the parts moved around .

So far the part to part fit, is that of a $300 special ! My <$600 Kral Empire XS has better intimate, part to part fitup than this $2000 gun.

Lets hope that this gets better !!
Off to load, and do some shooting.

Oh yeah, what's up BRK, you couldn't use pressure gauges that are freaking readable without a magnifying glass ? Have to call on Huma for some readable gauges !

Mike

Just getting into air guns and got a FX Wildcat Mk3. I'm right handed and left eye dominant, and wear progressive lens glasses. This is probably the worst combination to have when shooting. No problems shooting a firearm pistol right handed, as I just hold it in line with my left eye and keep both eyes open.

I've looked at a bunch of threads here and a lot are regarding wearing glasses, and a lot with cross eye dominant, but I didn't see much at all dealing with both.

I've got my target at 30 yards in my backyard and using a Hawke 4x16-44 scope and shooting right handed which is definately more comfortable to me.

First I tried closing my left eye with glasses on. I couldn't get a very clear image through the scope. Same thing with both eyes open.

Taking my glasses off gave me a good clear image, so then tried closing my left eye but it feels odd trying to keep pressure to keep the left eye closed and trying to focus on the target with the weaker right eye. This seems to be the best scenario so far, but wondering what others with the same situation do. I've seen the patch/block on the left eye lens of the glasses, but I think the progressive lenses are screwing up that method.

What's your best solution for those with the same issue?

I came across the Western airguns Rattler video on American Airgunners YT channel.. The one hosted by the guy that looks like Shawn from the show Psyc. I guess I had never seen this airgun before. Very interesting rifle but it seems to me, well it looks like a scaled up version of my Huben K1? Anyone know if it was designed by the Huben company or if I'm just off base?