I have a AEA 25cal carbine in great condition, just replaced the valve pin and it will come with an extra pin. Scope is not included. Asking 550 shipped TYD. Thanks for looking

View attachment 323271

View attachment 323272

View attachment 323273

View attachment 323274

View attachment 323275

Just found this guy Bill's YT channel https://www.youtube.com/@myairgunrange and was watching through his videos. Seem to be a pretty good long distance shooter out to 300 yards. Videos are good quality and aren't over edited from shot to shot. Worth checking out IMO.

used couple times. very sturdy and nice for the money 45 shipped bipod is like new used u

I would like to know if there is a place on this forum dedicated for people who build their own airguns ?

Thanks

18 cu ft Omega carbon fiber air tank. DOM of 10/19 provides almost 2 years until hydro is due. Looks and functions as new. It has only been filled by me with dry filtered air with my Airetex compressor. This is an extra tank and needs a home. Selling for $300 now $275 firm, including insured shipping to conus with tracking. Payment by Pay - Pal f&f or usps money order. Not interested in trades at this time. Please deal by pm. Thanks for looking. Herb

Are there any online brokers anyone would recommend? We’re in Houston area and running out of airgun dealers here. Thanks.

I am going a different way and don't need the peazy. Only used a handful of times and will come in the original packaging. $160TYD

Anybody know of a place in SoCal that could rebuild or diagnose/fix a leshiy classic? I may just buy the rebuild kit from edgun west and do it myself but I’m no pro.

I replaced the fill probe o-rings the other day and brought it to a scuba shop. Initially they started filling it and it was fine, then suddenly it burst air out and then wouldn’t fill anymore and the air kept coming from the fill port or probe. I’m not sure what happened there.

Help?

Picture shows what appeared when attempting to reconfigure left to right hand cocking. Following Page 7 of Owner's Manual (pictured), quickly realized Parts # 60 (Pinching Screw) and #107 (Axis) were missing, having been replaced by a steel pin. Correspondence, and pictures, to AGT, revealed an un-approved design, origin unknown, suggested contact with Krales. Krales, following correspondence and pictures, said return, via non-reimbursable shipping costs, regardless of findings, for inspection. Declined this offer. Oleg, from AGT, after discussion with colleagues, kindly agreed to provide missing parts, at no charge, if I paid postage ($10). Offer accepted. Gun functioned normally, accurate and holding air, would not have realized any problem if not switching cocking lever. Unknown long-term durability of steel pin configuration, suggest U2 owners, not switching cocking arm from factory setting, should inspect. WM

Picked up these 2 for $300 and couldn’t be happier. The R7 .20 cal.is a newer one and the 400 holds and works perfectly. I am very happy with both.

Looking for brocock commander owners the give there feedback. Im just mainly a plinker and squirrel hunter. So it just has to be completely system out of 70yards. But ID like to read what owners love about there guns!! Also show setup please and thank you!!

Addison

Crosman 362 22cal. Just bought it,shot it ten times and decided i don't like pumping. 75.00 neg.

Figured instead of throw it away or pay for the stamp and let the 3 letter mafia into my life more than im comfortable with, I could make it work on this NP03 build I'm cobbling together.

It came out better than I hoped, and I will get the stupid angle Kral puts on the tube straightened tomorrow. Should work out great. This rifle is just over 35 inches and is 177 doing 19 fpe regulated 140 shots. Capable of 22 or 25 conversion too. Fully shrouded and 5 baffles its pretty quiet.

Going to plastic weld the foregrip together and hope I can make it look seemless or ill epoxy over and shape it then try a hydro dip on it I think. Just waiting on a barrel band to get here and I can get it out for some groups, but I know this barrel loves cheap ole crosmans wish is a huge bonus.

Up for grabs is a sweet .22cal Impact completely rebuilt to shoot slugs!

Selling a COMPLETE package! A .22 cal FX Impact that has been tuned and upgraded by the man (Ernest Rowe) himself! He basically took this rifle apart and did all the available upgrades on this rifle! No expenses spared!

This impact started its life as a M2, HOWEVER it has EVERY upgrade internally and externally! Basically it’s a M3. VERY accurate slug rifle. I am selling it to purchase more toys. I have 3 Impacts, wife said I have to sell one if I want a Panthera.

Some of the upgrades include:

FX 800mm Slug Tension Liner ($399)
FX Power Block/Power Plenum Kit ($120)
FX Impact Tungsten Hammer and Springs ($49)
Kraford and Lypt KLS-2 Adjustable Stock ($274)
Huggett Magna Moderator ($200)
Saber Tactical Ambidextrous Cocking Block ($125)
Saber Tactical Extended Arca Swiss Rail ($150)
Saber Tactical Cheek Riser ($65)
Eagle Vision Infinity FAE-L50 ($150)
Element Optics Helix 6-24x50 ($400)
Saber Tactical Bag Rider ($65)
Huma Air Digital Pressure Gauge ($60)
ERGO Air Tactical Deluxe Grip ($40)
High Flow Slug Probe
2 magazines!

Over $2000 invested in upgrades and accessories.

Make me a reasonable offer for the complete package as pictured below OR I am willing to sell the rifle ONLY without the scope, scope mount, bipod and moderator for $2200. Shipping is included. Payment via Zelle, PayPal FF or Money Order.

I’m getting out of the sport and I’m selling my beloved FX impact m3

You aren’t buying just a pew pew, and then needing to spend more money to buy more parts. You are getting a complete setup

m3 bundle. Accs are installed and I don’t want to take them off.
M3 impact .30 pew pew only $2200. $1900
FX Carbon sleeve $100 90
FX angle bracket $30 $25
Saber tactical arca rail $150 $130
3x Sekhmet digital meters $300. $280

scope bundle
Delta Stryker 5-50 30mm scope $1600. $1400
JDscustom scope wheel $100 $90
Bobro Scope mount B10-300-340-20 $262 $240

accs
FX Tuner $170 $150
Saber tactical butt stock $250 $230
Saber tactical monopod $150 $130
Saber tactical bag rider $65 $50
Saber tactical adjustable cheek riser $70 $60
Stud Loader .30 $130 $120
3x mags $210 $200
FX chronograph $160
30x tins JSB exact 50.15 pellets $600 $560 I want someone to buy them all. Not interested in seeking 1-2 tins. At a time
Donny FL fat boy 2.0 $225 $200
Great white 97 CU FT tank $680 450 needs to be hydro tested
Hill EC-2000 compressor $1500. $1200 fills up gun fine but won’t fill my great white.

accs I could keep and use it for future toys
Penguin grip $60 $50
ACCU-TAC FC-4 G2 Arca $380. $360
Condition one rolling case $300 $275
Bobro Scope mount B10-300-340-20 $262 $240

Grand total $ 9692 spent.

i prefer to one and done sale, but I know it’ll be hard to find that one buyer. So I I’m parting out everything! Just tell me what part you want and make an offer.

Just don’t throw out wild low ball numbers. Do your research and show me why I should consider your offer. 1st I’ll take it gets it

PP FF or +4% GS Your offer needs to include shipping.

View attachment 7F3CE33C-F355-467B-9BAD-6E03485C6D0A.jpegView attachment 45B5AF88-3926-451C-BC8D-7E7F3D960D7C.jpeg

Selling my Fx Maverick .25. has the 700mm barrel with 580cc bottle. Amazing airgun. High shot count and the most accurate airgun I have owned. Excellent condition. Comes with 2 mags, Fx hard case and Athlon Argos 8-34x56 scope. Will sell without scope also. $1400 with scope, $1150 without scope. PP gift or 4%
Text or email
Text (530)215-6322
Email [email protected]

Can send better pics if requested. Thanks for looking

So I was loosing air and assumed it was the valve. I used soapy water and yes my valve on my air tank had a slow leak but I fixed it. But the leak was still happening to my dismay. I hooked everything up to my yong heng and my new water separator. Sprayed all connections and at about 3000 psi discovered that my tank was actually leaking in not one but 2 places. See pictures. I ordered this tank in early 2017 along with a valve out of China as well as the compressor as the costs were so much lower. Because I stopped shooting for the past 3 years and didn't have a good water separator and stored the tank in the variable SC environment of my garage. So word of advise. Don't do what I did.
So I am looking to replace my valve and tank and any advise or links would be great.

Hello can anyone give some advice on fitting a LW poly barrel on a impact? I'm considering shooting some heavier slugs in my mk3 .25 and was wondering if a heavier LW barrel would work better than a superior heavy liner. I'm trying to reduce all the barrel whip without spending extra $$$ for all the fx pieces there trying to sell to stiffen there barrels up. That should've already been installed on the $2k plus rifle!

...to be immediately transported to an appropriate location and Terminated."


"Does the condemned have anything to say? No? Very well."


"It's not revenge... it's more of a... a reckoning." - Doc Holiday

Hello AGN! I’ve become much more interested in the engineering and maintenance of Airguns. I have some questions about o rings and hopefully I can tap into the wealth of knowledge here.

(Skip to tldr near bottom if you’re in a hurry)

The context is I was taking apart my PCP and looked up O rings and a kit for my rifle which brought up this criminal operation
https://www.ebay.com/itm/144686987987

And then a more reasonably priced listing (given they’ve already figured out the full set for you) seen here https://www.ebay.com/itm/275171603689

However, further Googling brings up options like this 250 Piece BN70 O-Ring Assortment we’re now down to $0.10/piece.

My questions are:
(I searched some previous threads and tried to fill in some answers myself, hopefully maybe get some more specifics)

• Where do people source O rings?
  
  • The O Ring Store
  • O rings and More
  • …?
• Are Nitrile Butadiene appropriate, or should I be looking for a different material
  
  • Fluoroelastomer - seems to have “better aging properties” (maybe ideal for air tank seal?)
  • Neoprene - “outstanding physical toughness” (or this one ideal for air tank seal?)
  • Polyurethane- “popular choice in wear applications where abrasives, high pressure, and movement are present” (specifically mention QD fittings for this one, and Airguns, likely the winner at least for breech seals)
• Are the ones in the 250 count box likely to work or do Airguns use odd sizes separate from other industries?
  
  • Too many different sizes exist to have any good chance of fitting.
  • Use the sources listed above and a caliper to figure this out
• Based on the answer above have we found certain manufacturers (Evanix) use specific sizes of O rings across models? Does anyone have schematics/blueprints? Where is this information compiled?
  
  • ?

TLDR- (EDIT, backfilled with info in replies)​

Thank you for your time!

Hope you all have an amazing weekend and hope you enjoyed the quasi click bait title

Great condition, extremely accurate with 25gr AND 34gr. Holds air forever. Rifle and 2 mags. $750 F&F shipped.

I am selling my Fx Impact M3 .177. It’s been shot maybe 150 times if that. I bought it as a compact and then upgraded to a longer barrel and the large Airmaks arms bottle. I am including the original compact barrel and shroud. As well as the original bottle. Included below are pictures $2,500 obo.

PRICE REDUCED 2,000

Like new condition awesome pistol.
Finger groove grip
4 magazines
Shroud scope mount
Picatinny scope base
Ultradot Matchdot ll (6 Reticles and 11 brightness settings)
1 tin of R10 match pellets
$2,000.00 shipped

Just got my first PCP in November. Went crazy stocking up on pellets and wasn't happy with anything I came up with for storage. After a couple mis sized attempts I designed this tray to fit in a .30 cal harbor freight ammo can. Each row holds 3 tins of .25 pellets / slugs. If I buy more there is room to stack a second tray on top as well.

This is my favorite gun to shoot. I have wanted a different stock for years. My buddy and I were out camping and hunting greys in Sept. We both use the same gun. (Veteran standard in .25) We rave about the platform, but both of us agreed that it would be better with a 'different' stock. Decided I would take the band saw and belt grinder to the stock when I got home.... But couldn't bring myself to tear into it without a back up. After some impulsive purchases and a steep learning curve, the little magic elves in the computer controlled hot glue gun machine made this for me. Definately need some finishing touches and tweaking but it is comfortable, surprisingly solid and serviceable right now. I need a bit more foregrip to attach to the picatinny in front of pistol grip. Maybe just 2-3". Either printed out of rubber or Rubber scales that are mounted like the grip... I want to print a little rubber cheek piece and maybe a fill probe holder. I think I can find a mag holder already designed online, but want one for sure... what else would you guys do or change?