Air Arms Utah Airguns Pyramyd AIR FX Airguns Daystate Diana Airgun Depot Edgun West DonnyFL: PCP Air Rifle Shop and Airgun Moderators The Pellet Shop Airforce Airguns
Saber Tactical Optisan Side-Shot Scope Cam NE Airguns Baker Airguns AGS Topgun Airguns Predator International Huben Airguns Huma-Air Shooting Supplies Hurricane Luftvapen AEA Precision Airguns H&N Impulse Air ZAN Projectiles Hawke Optics Stud Mag Loader RX Target Systems Sports Match Scope Mounts Altaros Banner CTA Thomas Air Hatsan USA Georgia Air Guns Skout Airguns Nielsen Specialty Ammo Patch Worm Weihrauch Sport Talon Tunes Airgun-Revisions JTS ST7 PPP RTI AirStryk Industries Macavity Arms Vector Optics Corbin

Do-All Quadrant target (don't do it)

I've been wanting a quadrant target to add to my practice /sight in range. I missed the boat on the old Steel Plinkers, and I'm not ready to get a second mortgage for the Action Arms targets, so imagine my surprise when I saw a quadrant target for $35. The official name is the Do All Outdoors .22 Dialed Spinning Target. I saw that they have them in stock a Tractor Supply, and I happened to be by a Tractor Supply this morning, so I took a look.

Nope.

This target is designed to be shot at 50 to 100 yards with a 22LR. The plates are thick and heavy, which I would be ok with. The main issue (and reason I didn't buy it) is the center piece is huge. I didn't measure it, but it's at least 1 1/4" diameter. Might be good for some of you EFT guys, but for field target, not going to work.

They did have a regular 3 circle spinner for $12, I jumped all over that.

First time pesting with slugs

Went to my brother-in-laws farm for a shoot yesterday and it was very productive. Took my Tiapan 700 shooting slugs at 985 fps. The hybrid 22 grain slugs performed fantastic. It was my first time hunting with slugs. I am sold with how much better they work in the wind and how much more accurate at longer distance they are. I have always been a pellet shooter until today.. I shot 100 hybrids in one and a half day of hunting with only 15 misses. Closest shot was 50 yards and my furthest a 140 yard crow that I recovered. I simply can't believe how much easier shooting at longer range it is with a slug and how much more consistent my kills was over 100 yards..I love the Taipan...

received_825352849197582_kindlephoto-7188207.jpg


received_6698292083570034_kindlephoto-7043838.jpg

PCP Rifle  NLA Taipan veteran 25cal standard in tactical chassis

I have a veteran standard in tactical chassis I’m looking to sell.

I literally purchased this chassis a month ago from talon tunes, and now they’re discontinued and nowhere to be found.

I bought it bc I’m horrible with bullpups, and had issues with accuracy past 50yds with the original stock. The chassis was a game changer in the stability department.

The vet I bought a few months ago used here from a reputable member. It’s in good condition barring some small blemishes that for the most part were hidden by the factory stock. It shoots stupid accurate (like all veterans), and likes everything I’ve fed it. It’s currently shooting hades 26gn at 930fps, and surprisingly quietly for factory shroud.

Comes with 2 mags, and 3D printed mag holder. Will also include original stock. Double boxed with all accessories it came with.

Asking $1250 plus actual shipping conus.

Thanks for looking!

Scope and rings not included.

D3A43A70-CBC7-4A4D-8BC2-231CEF867E28.jpeg
983291E7-2797-4276-85C9-E027FC421406.jpeg
A868DB23-47EF-4823-B22C-2E749914CE17.jpeg
D23A7D1E-CC28-4891-8343-EF5D299542AC.jpeg
9BF4C635-649E-46C0-B470-8925316D6E91.jpeg
7E4EF361-317E-48E4-ABE8-5DAD627F140C.jpeg
D55E347A-F842-4DB6-B1D9-A6BA792BA9B5.jpeg
9C12D6F7-D216-4B88-856D-67802C0573AB.jpeg
30054FC7-3350-477E-8C5A-FE0C7F261E57.jpeg
7E0B6906-AD87-4814-9B24-581E281E9328.jpeg
6E70D47F-B317-4A56-BA07-8C92E0A1F941.jpeg

Accessories  SOLD RAW HM1000x stock

This RH walnut sporter style stock was on my .30 HM1000x until I replaced it with a custom target style stock. It's in excellent condition. It came from RAW with a 'blemish' per Martin, which can be seen if you look closely behind the cheek riser. The wood had a void that was filled and stained very well by his stock guy but it is visible if you're looking for it.

$250 shipped to continental US. Personal check or USPS Money order. Hershey, PA if you're local.

Please look closely at the photos as I've heard the later HM1000x are a little different and I will answer any questions that you have.

IMG_1531.jpeg


IMG_1529.jpeg


IMG_1532.jpeg


IMG_1530.jpeg


IMG_1533.jpeg

PCP Rifle  SOLD WTS Brocock Commander XR 22cal.

**SOLD**
I have for sale my Slightly used Brocock Commander XR 22cal (Non Magnum) bought a couple years ago new from AOA never field carried in like new condition.
I bought a BRK Ranger for pesting and have a Wildcat was wanting the wife to start air gunning she isn't into it so no point in having this just sitting in the safe.

Comes with the following.
1- mag
2- breech seals
1- single shot tray (never used)
1- JB3D Barrel Band Cutom ordered to the exact specs of this gun and fits perfectly has long picatinny rail (not available to order on their site) also with QD sling attachment (see picture)
Factory retractable folding stock.
All original paperwork

Very accurate and super quiet with an ODB 160 very back yard friendly.

It with ship in its original box and double boxed.
$1,075 O.B.O.
Includes shipping CONUS
payment via Paypal

20230821_071315.jpg


20230821_071156.jpg


20230821_071303.jpg


20230821_071344.jpg

PCP Pistol  SOLD Snowpeak PP800 .177 Caliber PCP Air Pistol with Accessories

SOLD

Snowpeak PP800 .177 Cal PCP pistol along with the following accessories. Everything is just like new and I have all of the original factory boxes.
* Vector Grimlock 1-4x42, SFP, 30mm Tube, Rifle Scope
* Scope Rings
* Buck Rail Barrel Band with 3-Picatinny Rails
* AT-1 Bi-Pod picatinny mount w/quick release

I will ship the pistol in the original factory cardboard box inside a shipping box.

I have this listed on my website so it can be purchased with a credit card; www.uncletomsplace.net

Ships Free to lower 48 states ONLY.

Please contact me if you have any questions.

Thank you,
ThomasT
2a.Snowpeak PP-800R.jpg

FX liners, non-choked?

Just wondering if any body has attempted in utilizing a 700mm liner with the choked end cut off to 600mm and recrowned to shoot slugs. I have heard that slugs prefer non-choked barrels. I have been toying with the idea in my head to sacrifice a $100 liner and test it with a slightly larger diameter (.219?). Idk, just throwing ideas out there. I feel that the choke hinders the fps and requires a hotter tune for the required speed for slugs (in conjunction with more contact area between the slug and barrel, of course). I would love to know any of your thoughts on this. Does anyone think it’s viable to try? I know fx liners are not consistent diameter throughout the entire length. That’s why I suggested maybe a .219. Very curious about any opinions out there.

FX  Maverick Compact .25 maxing out at 50 fpe (SOLVED)

Hey everyone, sorry if you're tired of my threads here.

I'm going on 3 weeks with my .25 Maverick Compact and after troubleshooting regulator issues I finally have the gun "working" but I notice that when I tune it, the Pellets start to slow down again over 130 bar on the second reg.

I have the hammer spring set as heavy as it will go on power wheel #7. Any more hammer spring and the gun won't cock. I start with the reg at 100 bar and test every 5 bar as I raise to 150 bar.

25 grain pellets are maxing out around 915-920 fps
34 grain JSB MkII is maxing at 850 fps

Is this behavior normal?

Edit: Updated title, the problem was the pellet probe was blocking the transfer port and the wrong hammer weight was installed. Gun was janky as hell from factory.
  • Like
Reactions: MongooseV8

PCP Rifle  SOLD 1720T in Rapid 70 Bullpup Stock

Please read entire ad prior to expressing interest or asking questions.

$375 shipped to lower 48 Paypal F&F or you pay the fees. Not interested in trades at this time....reasonable offers considered.

This one has been just sitting collecting dust, time to let someone else enjoy it.

1720t converted to accept .177 Mrod magazines, with the bottoms clearanced, much like the old skool method of converting a Prod to .177, prior to CARM and others making Prod mags in .177. The mag slot is sized for Mrod mag thickness, not Prod....it will include a few 12 shot magazines from an Umarex Origin, which fit perfectly.

gun will ship with what is seen here:

9dd472j.png


It is regulated with a Huma reg and the longer plenum offered by huma, with a reg setting around 110 bar IIRC. The valve has a peek poppet with 2mm stem and a cobra chamber. Hammer is an all peek lightweight hammer. This yields a very crisp, muted shot cycle. Currently tuned for in the neighborhood of 35-40 shots of JSB 10.3gr at 750fps. It is very accurate at this tune and ammo, 5 shot groups at 50 yards are very easy to keep under 1.5-2", even as small as an inch if the shooter does their part. A slight increase in HST will put velocity in the 775fps range.

The Rapid 70 stock kit has been modified to accept AK47 style or AR15 style grips. The stock accepts an AK47 pistol grip nut, as pictured an adapter is used to accept AR15 grips. IIRC it has a Hogue rubber grip. A shotgun rubber recoil pad was used to improve the ergonomics as I found the Rapid 70 kit to be very challenging to shoot as-delivered. However these mods are fully reversible to OEM Rapid-70 form. The Rapid-70 pistol grip and buttplate will be shipped with the gun.

The shroud end cap was replaced with a 1/2-20 threaded adapter.

Note the magazine slot was cut using an end mill in a drill press with cross slide vise. It is not perfect, but it is not rough either. Raw aluminum was painted over with a sharpie to knock off the shiny. Magazines are fully retained and do not fall out when cocking.

Please note I am not a professional tuner nor is my valve/hammer a work of art. However they are fully functional. Valves are fairly inexpensive if you want to convert back to an OEM valve. I am including the OEM hammer/striker assembly. IMO, unless you are wanting to turn the 1720t into a powerhouse, I would recommend sticking with the gun in its current state, it works quite well as configured.

I have tried to be as transparent as possible with the details of this gun. I do not recommend this gun being purchased by anyone who is not experienced at assembling/disassembling their own guns and replacing o-rings, etc. The Rapid 70 bullpup kit requires a bit of skill to take apart and put back together.

Feel free to reach out with questions.

Here are some misc pics.

TdD0jQV.png


5YFNcP0.png


4wYCRvV.png


srXU5pK.png


IagOJ7N.png


TdD0jQV.png


Single shot tray can be installed if wanting to shoot without magazines.

X12oLeI.png


rEvId4f.png


NtDSs23.png


A target shot from a full fill. Each group represents a full magazine, except for the bottom right 3 shots after falling off reg... Shot from 50 yards.

hJBHfsl.png
  • Like
Reactions: Loopster

PCP Rifle  SOLD Fall Cleaning - Silver FX Impact .25 FULL PACKAGE

Hard to find, silver edition Impact. Turn-key setup. Another amazing shooting and hard hitting rifle.
Brand new Covenant scope, 5-25x56 FFP + mounts (Original box and paper work can be provided if desired but will be shipped (and charged) separately)
4 pellet speed loaders
Holds air forever
600 mm barrel
Custom carbon fiber dipped shroud
Sabre Tactical extended Pic rail
DonnyFL KOI moderator
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1450 Shipped CONUS.
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

20230821_013804.jpg



20230821_013915.jpg


20230821_013900.jpg


20230821_013822.jpg


20230821_013827.jpg


20230821_013850.jpg


20230821_014413.jpg
  • Like
Reactions: olsenjb

PCP Rifle  SOLD Fall Cleaning - FX Impact .30 FULL PACKAGE

Absolute slamming turn-key setup. Probably the hardest hitting MK1, MK2 or MK3 air rifle I've ever shot or owned!
Comes with an 8-32x44 SFP tactical scope + mounts
Holds air forever
700 mm barrel
Extended Pic rail
2 unopened tins of .30 JSBs
2 Mags
Custom cheek piece
Barrel band
Hydro dipped carbon fiber moderator
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1550 Shipped CONUS.
OR
$1450 no scope or rings
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

20230821_014742.jpg


20230821_014847.jpg


20230821_014523.jpg


20230821_014806.jpg


20230821_014527.jpg


20230605_195134.jpg

PCP Rifle  SOLD Fall Cleaning - Brocock Sniper XR .22 **Price Drop**

Brocock .22 Bantam Sniper
Holds air forever
Comes with 7 high-capacity magazines!
Tanto moderator
Come with bipod and bipod-extended

Amazingly accurate and quite rifle.

Comes with everything except the scope & rings.

SORRY.... NO TRADES.
Now asking $900
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

Bamtam_Sniper_22.jpg



20221111_104231.jpg
  • Like
Reactions: Betohunter

PCP Rifle  SOLD Silver FX Impact .177 FULL PACKAGE

Silver edition Impact. Turn-key setup. Properly tuned by one of the best AG tuners in the West and is an incredible shooting rifle.
New Argos Gen 2 scope, 8-34x56 FFP + mount
4 pellet speed loaders
Holds air forever
Sabre Tactical extended Pic rail
Sabre Tactical adjustable cheek piece
Sabre Tactical Ambi-Cocking level
700 mm barrel
Great trigger
2 full tins of Monster Diablos
Will come shipped in an FX hard case

Comes with everything shown.

SORRY.... NO TRADES.
Asking $1700 Shipped CONUS for everything.
PP F&F, or you cover the fees.
PM with questions.
Thanks for looking!

-Jimmy

20230821_020957.jpg


20230821_020611.jpg



20230821_020552.jpg



20230821_020558.jpg


20230821_020616.jpg



20230821_020704.jpg

20230821_020728.jpg


20230821_021002.jpg


20230821_021308.jpg

PCP Rifle  SOLD Leshiy Classic *Sold

Looking to sell my Leshiy classic. Currently set up as .30 cal 350 barrel. The gun works flawlessly. It has a Warren Snaith custom grip, trigger mod, Huma-Air reg, case and .25 cal pellet holder. Also comes with .25 cal 350 barrel. Finally the gun will come with 400 .30 cal poymags. This .30 cal combo is incredibly accurate. I just recently put the .30 cal barrel in it and it is deadly accurate under 40 yards. Not to mention quite. Selling because it does not see much use. My pigeon problem is no longer an issue and the gun sits unused too much for such a quality gun. I will not part out. Scope and rings not included. $1,450 ppff tyd.

IMG_3556.jpeg


IMG_3555.jpeg


IMG_3557.jpeg

Traditional Rifle  SOLD Baikal Pair IZH46 and the RARE one, an MP532

Hi Guys,

I have 2 Baikal SSP airguns for sale.

First is my IZH46 this is not the M and really does not need to be.
I have done a couple thing to the grip to work for me.
The grip has been stained for appearance and I have cut finger grooves into it with stippling.
It now fits the hand like a glove no more 2x4 feel to the grip.
Seals are in great shape, first shot last shot they are all consistent with no pump up over time.
Additionally I have a B line scope mount that will come with the pistol.
I used it for a simple TRS25 red dot that is not included.

Funny story this little pistol has earned the name Wasp slayer as I have used it to kill wasps from approx. 15+ yards on a regular basis.
It is accurate and is not finicky on pellets. Its favorite is 7.0 Meisterkugeln.

I am firm at $550 + actual shipping for the pistol, I do not need to sell it and love the gun.

20230820_185905.jpg
20230820_185919.jpg
20230820_185946.jpg
20230820_185959.jpg




NEXT!
This one is for the 10 meter rifle fan or a collector of RARE Airguns.
This is my MP532.
If you never heard of it you are not alone.
I was such a fan of my Izzie that I did a search one day of converting an Izzie to a rifle.
Much to my surprise Baikal already had.
The result the MP532, designed to be a competition 10 meter .177 SSP rifle.
It fills the bill easily on accuracy.
What this gun lacks in refinement it makes up for in performance.
I shot it over the chronograph tonight and straight off it shot a 481 fps with 7.0 meisters (also the favorite of this gun)
It followed it up with 479, 481, 483, 483, 478, 485, and 479 again. * shots extreme spread of 7 fps. At that point my battery
in the chrono went dead for the night.
But given that this is a single stroke pneumatic it could do this all day and night without fail.
I have added a Gheeman 530 1.5x diopter/iris. This is a huge improvement over the stock iris which was missing when I got the rifle.
This with a modification by the previous owner are the only 2 modifications to this rifle.
The previous owner sanded the rear comb to form a pocket in the cheek rest for perfect head placement time after time.
While I would have preferred it be completely stock, it works very well in getting that proper head placement.
It was a little rough sanded so I have since sanded it down smooth and added some coats of gun oil over it to blend it in with the rest of the stock.
I have not refinished or stippled the stock on this gun, I feel it is too rare to modify beyond what has already been done.
While the beauty (or not) of Russian laminate stocks are in the eye of the beholder, it is fantastically functional in placing the shot over and over again on target.

I am looking for $750 + actual shipping, which a approx 500 less than you would pay for an FWB601.
While there is no denying the refinement of the FWB, this should shoot right there with it and is significantly more RARE.

IF SOMEONE WANT THE PAIR I WILL DO $1100 Plus actual shipping.

20230820_184734.jpg
20230820_184840.jpg
20230820_184909.jpg
20230820_185350.jpg
20230820_185433.jpg
20230820_185546.jpg
20230820_185443.jpg
20230820_185403.jpg


20230820_185911.jpg


20230820_185957.jpg


20230820_185607.jpg
  • Like
Reactions: Ydunn.223

PCP Rifle  NLA DAR Gen 2 .25 (Price Dropped)

Price dropped to $250!!

DAR Gen 2 .25 cal.

Great little hunting rifle. No leaks, holds air perfectly, and is quite accurate with several pellets.

There is nothing wrong with it. I just don't have time to hunt with it anymore, and my .177 and .22 are much cheaper to punch paper and plink with...

Tuned to shoot 25.4 grain pellets @ 875 fps, for 43ish ftlbs. This tune allows 20 shots (2 mags) before falling off the regulator.

It comes with 2 magazines, a 3d printed single shot tray, fill probe and all the pellets in the pics.

Asking $250 shipped to the continental US. I accept PayPal friends and family, Venmo, money order, or personal check(I will ship once the check clears).

I am not interested in trades at this time other than a Notos or possibly a Origin, JTS or Avenger in .22 or .177.

I also have some scopes available to sweeten the deal if that helps. They are not great, but would get you shooting.

Ask about them with a pm, and any other questions or if you want specific pics.

Thanks for looking.



IMG_20230820_56817.jpg


IMG_20230820_26568.jpg


IMG_20230820_56650.jpg


IMG_20230820_26909.jpg


IMG_20230820_26728.jpg

PCP Rifle  SOLD [SOLD] $1300 FX Crown MKII .25 600mm

$1300 Shipped in CONUS. I accept Paypal, Zelle or USPS MO (rifle will ship once checks clear)

FX Crown MKII in .25 cal with a 600mm barrel. Shoots great, 35 yard groups at 1/2" or less. No leaks or any other issues, it just works! Ordering a new gun and need to sell a few from the herd.
Includes:
FX Frown MKII .25 cal
1 original magazine
2 Orion magazines
Extended female fill adaptor
FX hard case

Thanks for looking!

IMG_0577.jpeg


IMG_0580.jpeg


IMG_0579.jpeg


IMG_0582.jpeg


IMG_0578.jpeg


IMG_0581.jpeg


IMG_0583.jpeg

Need a New air compressor 4500psi

Well I’m need of a new air compressor my shoebox air compressor finally died been sweet talking her for last couple months but she is done. Anyways need something new and holds up well was wondering what you guys have tried and what works well. Has spare parts available and some sort of customer support that actually exists. Thanks in advance!

Filter