Has anyone ever ran across a Bluetooth pressure sensor?
I think it would be awesome if you could pair it with the FX Chronograph for refined tuning?

OwlSet CO50
I have been given an offer to buy a used demo thermal scope, a OwlSet CO50 for €2000 (USD 2160).
I don't have much use for a thermal scope at the moment but brand new the price is around €3500 ($3780).
Is this one of those too good to pass up on deals? Scope was used for demo purposes at IWA 2023, so can probably be described as basically brand new.
It has 1-8 digital zoom or you can attach it to the front of a scope.
Does anyone own one? Is it any good? I can't find any reviews or anything on it since it's so new.

Does the impact valve adjuster knob have a set screw in it? I have three of them and they all look like the little hole on the knob is threaded but none of mine have a set. Screw to log it into place once you’re done adjusting. I am wondering if there is supposed to be one in there

Didn't want to hijack the main thread; so if you're hunting.
And
No pack allowed.
Nothing on your belt.
Just your gun and what you can put in your pockets.
No fanny pack.
As many pocketed pants as you can find counts.
This should be a fun twist for instead of carrying everything you can think of.
I'm going with ammo, compass, trail tape, tp, pocket knife, smokes and lighter. Everything else can stay at the vehicle
Let's hear what you all say!!!

I used to achieve very tight ES (10 or under) and SD (2-3 or under) with my FX Impact M3. I am now getting ES of 40-50 on my first magazine, then it tightens up to around ES of 15 or so on the second mag. I also used to get short range MOA or sub MOA POI’s. It’s now some MOA but several fliers – short range being 35 to 50 yards. Overall, first magazine is about 2.5 to 3.5 MOA.

Barrel has been cleaned, breech o-ring changed, second regulator is consistent within 2-5 bar, internals cleaned and lightly polished (valve, valve spring, spring guide, valve rod). Pellets are all washed and sorted by weight. The puzzling thing is that it tightens up some after one magazine (25 shots.) Can anyone tell me what I might be overlooking?

Here’s the setup:
Impact M3 standard (600mm) with unmarked power block (s/n 216xxx)
.25 caliber – shooting FX and JSB 33.95 grain pellets – washed and sorted by weight.
Macro 16, Micro +/-3.5, valve about 4, second reg 120 – these are factory specs for this pellet.
First regulator replaced with Saber Tactical first reg bypass.
Standard internals (hammer, spring, etc.)
Average velocity 872 fps when ES is tight - 830 to 900 on first mag now, then it tightens up.

Any help or suggestions will be helpful, especially if you have experienced this same situation.

Pre AF Early model RAW HM1000X LRT action with 20MOA Pic rail, V valve and regulator. No stock, barrel, probe or bottle, though I have them to add for addition money. Very clean no abuse only handling/mounting wear. $750 PayPal FnF. Can add 480cc CF bottle w RAW valve for $125 more.Msg for pics and info.
This model has the thin breach like Rapids and will NOT wider newer mags unless sanded down FYI
I have thin mags, walnut Sporter stock, complete barrel kits 20/25 to add if needed for a fee.
***I will consider trading my walnut stock or 25 barrel kit for a complete HMX 22 barrel kit and probe****
Trade for working complete Nomad 3 compressor, comparable or better or lesser plus cash TBD, AF Conder SS Maddog CF 22/25/30, 22/25/357 Raptor S or mini, Ataman MR2 carbine 22/25, R5M 22/25, Huben K1, FX bottle MK2/3 guns.
Thanks.
Keahi

No leaks. No internal mods. Good condition but needs setup.
Ramus moderator, Donny moderator adaptor, 4-CARM magazines + 4 stock mags, Buck-Rail stock, Athlon Helos 8-34x56 BTR scope with mounts- bipod NOT included. $400 cash local pickup only in Wisconsin.

For those of you who REALLY hate these critters. . . Merry Christmas.

The .22 Leshiy Classic did it's work fine with a cheap 'ol CPHP.

She drops 9-12fps each shot. 16 shots drops from 1065fps to 880fps. Holds air, uses about 3.4bar per shot which is reasonable. Two chronographs give same results. Bin Tac wouldn't help me even though I bought it from him. He said it was the hammer spring, but when I told him it was new, he said call the shop I bought it from. He didn't listen to what I was explaining and couldn't get off the phone fast enough when he found out I got a $14 part from TPS. Done with Bin Tac. If you have had the same problem I'm having, please chime in.
Thanks, Bill and Addi.

Raw HM1000X .30
Made right before the merger with airforce
Has a new Huma reg.
Comes with 3 magazines and a single shot tray.
Asking 1400 obo, tyd. PP FF
Scope and bipod not included

So hung a new ( to me ) pot on the 75y rack and wanted to hear its report so had the r9 scoped handy but not a mildot just plain crosshair. So it figured how well i coulg holdover without mildot help. Just wing it to around a bout on the vertical line

I guess not too bad ..

Potgong



75y holdover try

I'm typically not an umarex fan, but with all the positive reviews on this gun, and the 20% off at PA I caved.

$228 shipped to my door, an received today. Cleaned the barrel, filled with air, slapped a bugbuster on top...

Wow! Getting dime sized groups with just about everything I've tried so far, besides crow mags. Those did decent too.

Here is a group

15 mph R2L wind, 35 yards, FTTs 5.53



Without wind, it would've been a much tighter group. One flier, but I dont sort pellets. Inside of 25, itll stack crosmans. I haven't put 100 pellets down the pipe yet.

Also, she got her first blood on a young starling who obviously couldn't hear this rig because it's very quiet.

Well I did it. I finally joined the ever growing club, and bought a mini evol.

Thanks to Marlon for helping me out with purchasing his used mini. I’ve been wanting to try one of these for years. Almost since I got into the sport. Can’t wait to get it in my hands and finally understand what all the hype is about!

Thanks to all the enablers like @CTAirgunner, and @Dairyboy that helped enable me to spend my hard earned money on yet another pcp. Lol

to preface,

bought my notos in February of this year,
sort-of as a niche gun for times my impact would blow through the silo/barn roofs.

wasnt completely happy with it out of the box, the factory mag seemed to not group well,
so i snagged a carm mag,
made a world of difference in accuracy.


so i made the trigger nice,
adjusted the hammer spring to really flatten the shot string
(24 shots,749fps with 16gn fx pellets +- 2fps)

if you are a penny at 35yds you are in serious peril.
and at 50yds it will do better than an inch on a windless day.

so why would i want to sell it right?

not sure lol

after getting it setup i took 60+ hosps and starlings with it,
but now it just sits in the case.

when i go to my permissions i never seem to take it,
and my impact is too powerful for shooting in my yard,
so at home i shoot my sig virtus .22 semi and sig m17 pistol. (too much fun)

poor notos girl just sits in her case lol

In my attempt to try and get decent fps out of my crown mk2 i have bought a stiffer spring from huma air.
Out of the box i cant get the crown to shoot more than 890 with 13.4gr at 140bar and max internal HS adjuster.
Someone told me that I May have a weak spring so I bought one from huma.
I have also drilled a bigger TP in my barrel from 3.5mm to 5mm and that didnt do anything to my fps.
But now I see that the air go into a hole in my pellet probe and out and that has to be the restriction that holds everything i do back, so Will this new spring actualy help me in this matter or is a slug/pin probe a better upgrade?
It dosent help with bigger hole in my TP when the hole in the probe is much smaller?

I'm looking at buying a BRK Ghost HP .30 cal. I wanna switch the bottle to 580cc 300 bar. But is the 250 bar stock fill limit determined by the stock bottle or the regulator? Because if it's the reg, then that would mean that no matter what bottle I got, I could never fill to 300 bar.

So I guess the elephant in the room is.....Is anyone filling their Ghost to 300 bar....period?

I used to drink this coffee when I lived in Japan. Japanese are crazy for canned coffee, go figure. A little Asian grocery store opened by my house so I stopped in to check it out. They had UCC cold coffee so I bought a couple for nostalgia's sake and some Pokey pretzels, another great Japanese invention.

Well this has to be the most awesome can available on the market. This thing is made out of steel, none of this tin stuff. Have been shooting these for a couple of weeks and regular cans do not even come close.

.22 Taipan Mutant short in great condition. Fabulous trigger, super accurate and super quiet with the supplied 3D printed baffles and short moderator. Includes 2 magazines, single shot tray, adjusting pins, and original shroud bits. No scope or rings. If you want them we can work it out. $900 shipped CONUS. Paypal F&F or plus fees.

I want a new scope for my marauder. I have it narrowed down between the two in the picture. Obviously one costs more, but is it worth the price increase? Thanks for your feedback.

Ain't it funny how a regular ol' dude like me could make pro finals? Here is the gear I used to do it!

I started to nickname some of my airguns, this one is Blonde. She has a gorgeous piece of wood. Anyways its a AZ Tuned and modified Theoben Rapid .22cal non regulated. Setup shooting a JSB 18gr at 900fps. It was a very calm evening last night and she wanted to stretch her legs.I shoot 9 shots at 100yds, 7 out of 9 were MOA groups. I smile every time I shoot this Rapid. I have owned several in the past and did the young dumb thing and sold them to try something else. Man, do I appreciate them now! The shot cycle is so smooth it doesn't even move. Thank you so much AZ.

I have been loosing velocity with my tx, Change to a vortek pg4ho and velocity still low. So I went to change transfer port o rings and the transfer port came out with the rings, I am just wondering if this is why I am loosing velocity. Ordered a new spring, not here as yet. should I lock tite the port back in. Steve!

Good deals to be exact. Appreciate your help.

I have an m3 first reg delete with a huma reg installed secondary. When screwing the bottle in the reg gauge it's going to the level the bottle is charged to like it's bypassing the reg. Should I take the reg out and check the orings in it?

Clean pass-through on standard size soup can with 15.89 jsb hades.Any guesses on the energy at impact? Good enough for squirrels at that yardage ? MV with the hades is 681 fps ....