Hello,

I have an FX Impact M3, .30 cal with:

Element Optics Nexus scope

Carbon fiber barrel shroud with harmonic tuner

Donny FL Fat Boy moderator, moderator extender, and air stripper

Saber Tactical extended upper rail, Saber Tactical extended Arca bottom rail

Saber Tactical adjustable buttpad

GRS topmount bipod and adapter

$4,000.

These don't come up too often anymore. Your chance to get a mk1 impact before the smooth twist x liners came out. This gun has only had at most 500 pellets through in between me and the original owner. Im the second owner, and only put between 100 and 200 shots through it myself. After receiving it, I ordered a few upgrade parts for it but never installed them. I completely re-sealed the gun and polished some of the internals to get the shot string to tighten up. After doing that, I sighted it in with a few more pellets and basically put it back in the case where it stayed for the past two years. The gun shoots flawlessly and is in great condition. There is the slightest little imperfection of the DLC coating on the barrel but you cannot even feel it, it is only superficial, and there is a couple little scuffs on the bottle where a bipod rested from the previous owner. It comes with one of Ernest Rowes' custom cocking levers and the OEM one, the upgrade parts I never installed, a complete replacement set of seals and gaskets, some unopened scope stickers from utah airguns, an unopened can of jsb exact king diabolo's, and everything else seen in the photos. I'm asking $900 obo plus shipping, which we can split. CONUS. I accept Paypal F&F or you cover the fees. Feel free to pm me or text/call me at my cell (317)315-9528 with questions. Thanks for looking.

Hello everyone,

Here is how you turn a cold, wet and windy day into a Hoot to Shoot. My good friend and neighbor Mr. D ( Delbert ) invited me over to his farm to do a bit of target shooting. I had just completed the new Alpha Bullet~Pellet-Trap ( I will do a separate thread on this later ) so I took it with me and spent half a day doing some test shooting. Set the Trap out at a measured 50-Yards and shot two clips (22LR) and only removed some paint at the impact area. Talk about being spoiled, I was chauffeured via the golf cart, out to the Trap for inspections. Got back home and set the Trap out at 10-Meters and shot the heck out of it with my .22 cal Airacuda Max using both 18.1gr at three of the 10-Rings and some 25.4gr. I shot 25-shots of the 25.4gr at the last 10-Ring and pretty much stack all 25 shots. Looking on the inside none of the pellets even removed any of the paint at the impact areas. Turned out to be a really great day and thank you Delbert.

ThomasT

Just wondering if any of you air using air guns more during the quarantine? With the scarcity/cost of ammo, social distancing, ranges being closed and people stuck at home, this seems like the perfect time for air guns.

I wasn't sure how to find a mod here straight out, so any help from them is appreciated along with any of you members.

I haven't been so active in the forums themselves, mostly the PMs about the collection I posted about some time ago.

Been selling some things on American Classifieds, but would rather sell here to you all, as a lot of you that contacted me were very helpful. Also, running into many uh, odd characters texting me or emailing was less than desireable. Understandably, a lot of people that contacted me were highly suspicious of scammers. I could see why, as I saw a few myself, but I also thought that might be quelled a little bit more here, as you seem to watch each other's backs. Even sending multiple requested pictures, it was hard to convince people that I wasn't scamming them, and although it's understandable, it's a little exhausting.

I have quite a few to sell as well, still. I've only sold a few, so another question would be, how many posts are considered too many here? I don't want to spam the heck out of the classifieds with every individual item. Is there a way to list them all in one post or does it have to be one at a time? If so, how many would you all say is reasonable? I don't want to be disrespectful or rude. Please give me any heads up needed.

I have the required amount of messages to post there, but as I said, I haven't been as active in the forum. I've been swamped with trying to work and take care of the things necessary since my dad's passing. If that is a problem with me advertising here, I would like to know that as well.

Thanks all, in advance.

like new Nordic wolf GRS stock for the FX Crown. $425 shipped. PayPal. no trades.

Brand new from FX, The King is here. Incredibly efficient, extremely powerful, and topped off with a GRS stock, the King is a staple in the high end airgun category. Let us know what questions you have!

So far we have tested shot counts - shooting 18gr out of the 500mm .22 cal, got 150 shots before reaching the reg. So far we are very impressed with this platform and excited to see what all it can do.

SOLD

I simply don’t have time to tinker. Who is known to tune the FX impact X ? I want to send it and get a tuned

Do any of you ever worry that with the increase in power and caliber that airguns will be more on the radar to be regulated? I know how liberals operate and even though I've not heard of a single case of problems, the could, and in some States, already are limited as to who can buy what.
Just curious as to where you all see this going. I just saw an ad for the new FX King and the power levels are way up there.

Dear mates, I filled up my Dreamlite .22 day before and the regulator pr was around 135bar. I DID NOT fire it that time.
After 20 hrs, I realized that the regulator pressure itself has moved up to 140 bar.
I fired the first shot and the pressure went down to 120 bar. Till other four consecutive shots it remained there. I left gun under observation.
After one hour, I realized regulator pressure moved upto 135 bar. Then very slowly to 140 bar in other 12 hours.
Have seen 910 Airgun video several times and earlier gone through this pain of adjusting regulator by degassing the rifle (as internal plenum installed).
There is .....
1. External AMP adjuster screw.
2. Piston travel adjuster (brass one with two small o-rings) whose travel controlled by a steel ball and the ball's movement further controlled by allen screw.

I received the gun few days back to rectify the similar creep and the person assured of having changed all O Rings and set regulator pressure between 130 - 135 bar. This has become a PAIN to repeatedly open the rifle and work on regulator.

I will be very greatful if someone can guide what to do.... which screw to tighten or loosen.
Don't want to courier the gun again and
again. Please help.

Shot this squirrel this afternoon. .22 hatsan 95 vortex, 17.75gr vortex pellets, about 15 yards resting on sliding door frame. Head shot, dropped stone dead. Cleaned and in fridge. It will be cooked up this weekend with the other few that are in the freezer.

Already looking for another gun, I love my R9 in .177 caliber, I wanted a .22 so I got a Hatsan and dislike it because I can't seem to get good groups.
So, Is the HW85 the same as the 95 or does it have less power.
The HW80 has more power but will it be less accurate than the 95 due to more recoil. Also for those who have shot both HW80 and Hatsan MOD 65, how do that compare in recoil?
Also noticed the FPS is different from site to site.
Krale has the more HW's than other sites, are they a reputable company to buy from.

Here it is:



The rifle shoulders comfortable. I will shoot tomorrow morning.

I had to move back the scope five slots on the weaver rail.

You guys.... seriously




I just got the best thing ever, well, at least for the price. I had the chance to get my hands on one of these XInfrared T2 Pro thermal units that just mounts on your cell phone and it honestly blows my ATN Thor 4 thermal scope out of the water completely! This is gonna be the ticket for finding coyotes this winter!

Here are some links that they've given me a $50 off clickable coupon for you guys, so don't forget to click that if you order:
XInfrared T2 Pro, Android (clickable coupon for you guys!): https://amzn.to/49ynxA7
XInfrared T2 Pro, Apple (clickable coupon for you guys!): https://amzn.to/3MHRbt1


And here is my video where I show you all about this thing, including comparison footage VS the ATN Thor 4 AND some footage looking through my $4000 PVS-14 NV Monocular:

Reduced,

Out of the house only once. No scratches, no marks, no leaks, no blemishes. All original with no mods. Comes with original magazine.

Last photo shows the last 5 shots I ever shot with the gun.

Cont. US Only. $1450 plus shipping.

PCP newbie here. I had some concerns regarding my new Avenge-X that might also be basic PCP questions:

1) The lowest pressure I can get on the regulator is 1500 psi. And yes, I degassed before lowering the regulator... I tightened the reg screw all the way before filling, but the reg still creeped up to 1500 psi over the course of a 4000 psi fill. Is this a cause for concern or do I need to "wear in" the reg some more? I should note that aside from this, the reg is pretty stable and only creeps ~100 psi over the course of a week. The 1500 psi minimum is kind of annoying because I'm trying to get <900s fps for 10.34gr 177 pellets and I'm stuck at ~910 even with the hammer spring all the way out.

2) The fill port cover is sometimes very tight and I don't know if that happens when I degas the gun (everything gets cold and the metal contracts), over the course of shooting, or if there's a leak causing pressure build up at the cover. Anybody have experience with this?

Thank you and have a great day!

This is the 6-24 x 56 with the 34 mm tube. I just opened the box to take the pictures. $1,200 shipped in the continental USA

Hello All,

I have an AGT Uragan 2 that I’m having trouble filling. It’s the compact version and the bottle is small. I tried filling it directly from my GX CS4 compressor but it leaks around 110 bar. So I bought a tank and tried filling it with a faster burst of air and it maid it up to 150 bar but still leaks. I bought the gun new from Krale and I’ve already shipped it back to them to check out. They told me it’s fine and held full pressure for three days. My next plan is to refill my filling bottle and try that again with an even faster turn of the release valve. If anyone has any suggestions I would appreciate it very much. Thanks

I have had this a couple years. It still works fine. However I now use a cs4 to fill my gk1.
It may need a rebuild since I have used it so long. Or maybe not. That's why $250 (now $225) shipped lower 48. PayPal or zelle.
Will put it on eBay also.

Moved to Gunbroker

Didn't know where to post.. My family has 96 acres of property here in fayete County pa..The property is actually a wonderful wildlife estate or excellent candidate for some white Tail habit management. The problem is a small patch town is in the middle of our property.. They do whatever they want..They have threatened me...harassed me...I got the ON X app and posted all borders with signs purple paint and purple tape...A combination of all three...You can't rip paint off trees.... The neighbor directly besides my 40 acre parcel....shot a 160 inch buck last year... I literally followed the blood trail tape for.that buck going through my field.. Where they trespass the most ATV gas line...I cut 30 ft of trees brush briars....to block access to property..... They came in worked and removed it all......ahhhhhhhh.......the other side of gas line on my property blocked quad trail with T-post purple tape Posted signs....as soon as I left... The trespassers came back with T post puller and stole my post...unblock. Trail.... The trespassers are sad to say grown me 40 and 60 years old of above middle class... I'm disabled just starting to get around...Im not able to financially or physically able to build gates and fences for them to deconstruct when I leave.. I don't now if I can camera trap them......Last year when the 160 inch buck was shot by neighbor... My nephew found corn bait piles on my property... Close.to trespassers house 100 yards... Game commission called...they removed bait piles.. The trespassers uses many cell cams and monitors one way road ...they know when I'm on my way to property..... I gotta stop stop.them or sell property.... Thanks for any advice and letting me vent...this forum has been so good to me and so much appreciated.....