So I brought a new HW100S (177) yesterday.

What do I need to do or know as a new HW100 owner?

I’m thinking I should give the stock some treatment before I start using it. There’s a thread on walnut stocks that suggests CCL oil. I’ve used walnut oil for my TX200 in the past but I don’t think it really seals or drys to a hard finish.

I’ve also seen comments about cleaning the factory grease off of the hammer/spring and using some light oil instead - but there’s also guidance that this then needs regular lubrication so is it worth the hassle?

Future mods/upgrades that’ll be I the planning:

Studs
Rowan Engineering adjustable buttpad
HW100 Tuning kit 3
HW100 tuning titanium cylinder
Huma in-tank regulator

Anything else that’s worth considering or in peoples opinion not worth it?

Won’t do all this at once, probably gradually over the next year.

Have an older Crosman pump .22 air rifle.
On the area behind where the pellet goes it says CROSMAN .22 Oct 28, 1924 Patents Pending.
On the other side it says MFD BY CROSMAN ARMS CO Rochester, NY

A couple years ago it would pump up and shoot just fine. Then started not pumping OK and holding air.

Now when I pump it the air just bleeds out through the barrel at both ends.

Who works on them to get it going again?

Very slightly used 0dB 160S .25 Caliber Moderator for sale (can also be used with .177 and .22 caliber airguns).

1/2 x 20 UNF threads.

Dimensions: 1.25" x 6.3"

Weight: 5.2 oz.

$140.00 USD including USPS Priority Mail shipping to CONUS. PayPal F&F or U.S. Postal Money Order. No box (I bought it from AoA with an air rifle, and AoA shipped it in a pre-cut moderator slot in the rifle case foam lining without the box).

I'm relatively new to Airgun Nation, so if you would like to check my Gunbroker rating of A+(111), here is a current listing for a holster. Send me a message on Gunbroker and I'll reply that, yes, I'm the guy selling the 0dB Moderator on Airgun Nation: https://www.gunbroker.com/Item/1007420106

Also, here is a high dollar gun sale I completed on Gunbroker just a few weeks ago: https://www.gunbroker.com/item/1003780218

Thanks for looking!

Photos
courtesy of Rick C.

Hey guys,

I am looking to make my 2240 XL into a PCP. I know you can get drop blocks and bottles BUT I want it to be a little pistol. No carbine. I have Notos for that.

So... anyone have experience with this kit?


I liked that one because it is regulated and has 2 gauges.

If someone has that kit what kind of FPS are you getting? How about shot count? I would rather more power than shot count just cause it's a tiny cylinder and would take like 15 pumps to fill again lol Looks like this kit has adjustable reg set point.

If there are other "plug and play" kits for similar $ let me know.

We have a decent number of owners that continuously upgraded the Leshiy2 and ended up with drawers full of parts now. As myself as well never sold anything but finally got to a point me better to offer for any trade.
Can we start a thread what all we can list things the other guys may have a better use?

I posted my collection of airguns for sale and all but one sold in one day. Thank you for the opportunity to allow others to enjoy these great guns.

I have found three that are sitting in my safe that will go.
The remaining .25 Ataman MR2 Carbine. $495. Show room condition and still under Pyramid warranty. Full walnut stock.
Like new, flawless Sheridan .20 Blue Streak with fancy walnut stock. Perfect and every way. $375. Look on EBay at the range of these guns offered and prices.
AirForce Condor .25cal. No moderator. Top hat kit and in original box. Fired less than ten times. Perfect. $425

Shipping is staggering now. But, I can help a bit. If you are interested contact me at 760-855-8184 for pictures. I respond f to text very quickly. Pacific time.

I have a well loved and well used MROD in 22. Its served me well but I want to step into a .25 for some extra pop when hunting. I have been reading about the Tiapan Veteran (standard and the new model). I'm seeking opinions from owners. When did they roll out the new Vet? Can I still get an old one NOS? Comparing shot volume, should I plan on an additional moderator for a 25 Vet?

I noticed that the old one operates on 250bar and the new one on 300bar. With a single 4500psi tank I feel like a 250bar gun would allow more fills.

Hey Folks, I need some help here. Like a fool, I trusted the auto shut off on the compressor I use to fill my guns with, and one of my Artemis P15's pressure gauge was maxed out when I noticed it hadn't shut off. Now the gun only shoots at about 750 fps, as apposed to the 850 fps it used to shoot. There are no external air leaks. I put the gun aside for the past few months and today I tore it apart and replaced the regulator (set at 120) with a huma I had lying around. I refilled it and started shooting and it was shooting at around 880. I adjusted the hammer spring and got it down to shooting at 850, and it was stacking pellets again at 50 yards (JSB 18gr) like it used to. (Yeah, I won the barrel lottery on this one!)

Anyway, after a dozen shots it started dropping off again and within another 10 shots it's only shooting 750 fps again. As I said, there are no external leaks. The gun sat for the past 4 months and the pressure gauge never dropped. I can't figure out what is causing the issue, but I wonder if the air cylinder slightly expanded when it was over filled and air is leaking internally somewhere. I would appreciate any help you folks have to offer. Thanks!

Putting my Daystate Regal.177 unregulated up for sale. Shoots JSB 10.3 around 18.5 ft.lbs. I am the original owner of this, bought new from AOA. Stud mounted on forearm for bipod. Original moderator ( removable ) included, single shot tray, magazine still in bag (never used). I will be keeping my scope and bipod. Call me for additional details. 618-694-3086. No leaks, original box, discuss shipping.
No trades please.
Reduced price of 750.00.

Picked up a 35L from the classifieds this week. It been up there for months now and I've been drooling over it ever since, hoping someone else would grab it before my willpower gave out. The seller claims it was a 1973 release but the HW database says 1975 so I'm not really positive when it was made other than early to mid 70s. That being said, I am a bit confused by something. The barrel also says "Made in Germany" as opposed to "Made in West Germany" so I am assuming the barrel had been replaced at some point more recently? Any thoughts there?

What I find very cool about this gun is that it has the German Feimark on the barrel which, according to a Tom Gaylord publication, would mean this gun was originally built for the German sub 7.5J/5.5ftlb market. It would also mean that if it still has the original piston is slightly short stroked compared to most export 35s to reduce power. Based on the shot cycle and the 6.2fpe I'm getting from my chrono numbers, I'd say its probably original inside with the exception of the updated seals and spring. Now of course this all assuming the barrel stamp to be correct which I'm thinking its probably not unless I'm missing something. Anyway, here are some pictures. If any of the Weihrauch experts have anything to add, please do!

how many of you store your gun with one pump of air in it?
I always have but don't remember why, was it in the manual?

Up for sale is a Taipan Mutant .22 Cal.
Love this gun but I don’t have to shoot them all. Cleaning out the safe. Super accurate, super quiet. Has the 1/2x28 threaded end to add your favorite moderator but really doesn’t need any bits extremely quiet as it is. Shoots the 18gr JSB at around 890 fps consistently. Bipod, scope and rings not included. Comes with 2 Mags and factory box.

790 shipped to the continental USA.
PAYPAL FRIENDS AND FAMILY AS USUAL.

CALL OR TEXT WITH ANY QUESTIONS
602-489-8828 Rafael

800mm 22 caliber barrel will fit any Fx rifle. Comes with bran new un used fx impact 22 cal pellet probe. Loves 34g 218 H&N slugs & 35 grain nsa are the second. 300.00 shipped...I would be interested in a trade for a airforce condor doug nobal valve a
Also looking for a 257 condor barrel

24 inch original Fx 14mm smooth twist 30 caliber barrel barrel is threaded 1/2 20. Inside of barrel has a mirror finish, Also fits any fx rifle. Comes with bran new fx impact huma high flow probe. Shoots jsb and zan pellets extremely well. 230.00 shipped SOLD

Payments im willing to take. Paypal F&F, Cash app or certified bank check.

Thanks for looking

$225 to the door firm new bottle made just 5 months ago as of oct 2023. Comes with sleve/ dual gauge valve as seen in picture, Great little bottle to take on a weekend or hunting trip. Accept zelle/paypal. shipping in to us only

Up for sale is my Leshiy Classic setup in .25 caliber. It’s the 350mm barrel setup. Has a HUMA regulator installed. Comes with the green soft case pictured, Omega CF tank pictured, cloth protector on the barrel and filling adapter. Bipod and scope are NOT included in the sale.
1100.00 Shipped in the continental USA or you Can pick up in person in Phoenix, AZ.
PayPal Friends and Family as usual.
Please call or text with any questions as I don’t check my mail regularly. 602-489-8828 Rafael

Excelent condition all anodizing in tact no marks $120 firm to the door accept zelle shipping only in us. .25-.30 cal

I have a Joe B Tethering Regulator that I'm not using and don't really think I'm going to. It's rated up to 6k . Works great, just sitting in my safe taking up space. Asking 400 +1/2 of shipping. Thanks for looking and have a great day.

Hello everyone,

I received my order of new 18gr pellets and will now run several shooting test to compare all three Brands. I will test each pellet at 10-meters and then at 25-yards and shoot them straight out of the Tin. After zeroing the scope on a separate target and filling the rifle to 3,000psi, I will shoot eight (8) times at my “Pellet Comparison Second Target” paper target. I will repeat this procedure for every test at both 10-Meters and 25-Yards. The three “open” rings are 1/4", ½" and 3/4" and the Black Dot Bull is 1/8".

The three pellets/brands are:
1) JSB Jumbo Heavy, .22 cal 18.13gr
2) H&N Baracuda 18, .22 cal 18.13gr
3) JTS Dead Center Precision, .22 cal 18.13gr

Below are the results for the 10-Meter Test and I will post the 25-Yard Test results later. As you can see, the JTS is just a hair better in the grouping. It will be interesting to see the 25-yard results.

ThomasT

With WW3 well on its way, what are you air gunners doing with savings that will soon evaporate, gold, silver, property, bitcoin, air rifles, ammunition, canned goods or prayer only.

Could anyone recommend a pcp air rifle. New to the sport, will be used for targets.

was looking at BSA R12 CLX PRO or Airarms ultimate sports R

All advice appreciated

Thanks

Well last time I shot my beautiful paradigm was 6 weeks ago (September 2nd to be exact)... I had just 35 minutes today to pack the jeep up, drive down to the range on the property , setup and get a handful of groups in.

I'll preface this whole thing with.... this next set of pictures, "This is what a guy looks like who's focused on driving his ferrari"



Needless to say the quickly shot 9 shot groups at 100 yards can speak for themselves. Aside from one shot pulled all 3 were moa or less at 100 with a full magazine dumped on each one. This little shooting session reminded me why the American Air Arms Evol is top teir. The trigger is superb. The ergonomics are fantastic. The barrel is rugged and sturdy. All of it working in complete unison to get the job done.

I’m putting my GK1 .25 up for sale. I know it’s hard to get these and that’s why I’m asking $1250 for it. I’ll include the shipping for free at that price.
I just got it in for review and I’ve done a few videos with it. It shoots awesome. It’s basically brand new still.