All are Excellent to like new condition.
***SOLD***#1-UTG Bug buster 3-9X32 IR Mil dot reticle R/G, sun shade and rings included. $90.00 SHIPPED

#2-Hawke Vantage 2-7X32 Adjustable Objective, Mil Dot reticle, Lens caps
$95.00 SHIPPED

***SOLD*** #3-Accushot 3-12X44 Mini Swat, Mil Dot reticle. S/ focus, includes rings & level.$100.00 SHIPPED


#4-Accushot 4-16X44 Mini Swat, Mil Dot IR reticle. Side focus, includes rings & level.
$150.00 SHIPPED

#5-REDUCED***Athlon Argos BTR Gen2 , 6-24X50, mil dot illuminated. side focus Lens covers. $275.00
NOW $250.00 SHIPPED AS NEW

Just picked up a couple of these guns. Never owned one before and haven't shot either yet. Ones in .177 the other is .22. Unfortunately, no open sights on the synthetic stock gun.

From reading about them they may be a decent gun.

Anyone have any opinions on these things?

Yeah, I know that is WAY too fast. Should be spiralling like bent drill bit!
Shooting slugs thru my Huben @960, end of your nose accurate.
Let's try some Mark II, but I don't want mess with the tune. Let's just see if and what it shoots. On the dot accurate @ 90 yds.
I don't see spiralling. Am I just pushing past the skirts range to wobble? ( aeronautical term.)
Sound like a 22 rim and hits like it to! It hits head first, no hourglass hit. If I weren't just messing around, I'd slow her down to the big 900.

Okay all you wizards of air - looks set aside, which material is the best for our air rifles?

Before you start peeing on each other’s legs with emotional drivel, which is amusing, can you back up your claim?

I’ve heard that the metal chassis stocks “have no soul”. I’ve heard that “plastic stocks will never make serious shooters”. I’ve heard that “wood stocks are just too heavy”.
Me personally - I drool over natures wild wood grain patterns even though I’ve never won the cool wood stock lottery. But I also enjoy a light weight rifle that a little marring doesn’t hurt. It would seem to me that a high degree of adjustability would really improve ANY stock.

Hey all,

I’ve been kicking around this idea in my head for a few months now, thinking about what I want my next air rifle to be. I’ve narrowed down on a HW77 or K model.

On the shelf there’s a K model in .20 and a long model in .22. I cannot for the life of me decide between the two.

My ideal shooting looks like 25-100 meters. Primarily targets. Maybe a squirrel or hare if they make it too easy to resist. Planning to use a AirForce TS1 rear diopter and a globe up front. Shooting from all positions.

So the question comes down to how the .22 and .20 will compare at 100m and the offhand shooting of the long and K model.

Any words of wisdom from the HW owners out there?

Thanks everyone!

Does anyone know the actual head and skirt diameter of the JTS .22 25.39 pellets? I see they are an actual shallow skirt like the original JSB redesign pellets unlike the Shallow skirt redesigns that JSB has decided to go with recently. One of my .22's can't push the entire pellet past the transfer port because of the deep skirt.
In fact it's taking up half of the port and I get some funky readings over the chronograph.
I'm hoping it's just the fact that the FX/JSB 25.39 skirt is so weak it deforms when I pick them up, and might be getting bent from the air charging sideways at it up the port.
I was hoping the JTS that look like the original JSB rd's might fit the bill and push out of the trxrf ports way, but don't the the head and skirt diameter specs.
It seems JTS has removed the specs from their website for some reason on these pellets. Does anyone know the actual head and skirt on these pellets?

got this over a year ago i think. shot it a few times and put it in the safe. its a co2 pistol.
asking $100+ shipping cost. if you want more pictures pm me.

Had 9 show up this morning. Overcast skies with gentle breeze throughout both matches, really steady and nice conditions probably contributed to eighteen 250's shot today!!
Slug-Fest in Pro. Bob, with his pellet rifle, tied most with is 749. Show-off Joe and his damn pistola. Congrats - Dennis shot a 750 Sportsman.
And good ol Dana took the long 330 mile drive south to join us to win by X-count.

Next shoot - tomorrow, 4/21/24

N50 Nationals Signup: https://www.national50.net/events



Here's a nice condition moment.


Matt, Bob, & Dana


N50: https://www.national50.net/
FB N50: https://www.facebook.com/50National/
AirGunNation: https://www.airgunnation.com/forums/benchrest.558872/
Benchrest Central: https://benchrest.com/forum/forums/airgun-benchrest.19/

I have 3 full and 1 half tins of AA pellets
Asking $35 Shipped conus PP F&F, cash app OR trade for 13 grain knock outs or any .177 slugs let me know what you got

Hello. I just got my first Hw30s this week that I ordered through Krale and I am very excited. I just took it in the backyard to try to zero it. I am a little frustrated, I have the screw in the rear site all the way up where I can’t adjust it anymore for elevation and I am still shooting about 2” low at 10 yards. I only have a hundred or so pellets through it. I am shooting crossman premier 7.9gr hollow points. Some fit into the barrel easily, some are tougher, not sure if that’s an issue. I also smell some smoke like smell when o shoot sometimes.

Any thoughts? I planned on keeping it with iron sites, don’t really want a scope. I took the rear site off and put it back on, took the gun out of the stock and reassembled and still the same. Try different pellets maybe? That just seems very low to me.

Thank you for any help.

Great little pistol and there is no issue with the gun. It comes with two Marauder pistol magazines not shown in picture. Any questions feel free to ask. $225 shipped in the CONUS. Payment accepted is Paypal friends-and-family. Paper check is accepted but will have to wait until payment is clear before shipping it out.

Selling my BRK Ranger XR .22 cal. in excellent condition no leaks comes with the following.
1 - OdB 160
3 - BRK Factory mags (Now cost $119 ea.)
1 - Custom made barrel band from JB3D
1 - Fill probe and fitting
1 - Magpul XTM Hand stop kit
1 - Single shot tray
1 - Thread protector for barrel
1 - Manual
Xtra Breach seals and probe seals

Purchased from AoA
Shoots, H&N Barracuda Hunter Extreme and JSB Hades very well.
Great Pesting gun.

As with everything I sell and ship I will provide a shipping label as soon as funds are received and ship same day or next. Package will be well protected and double boxed.
Prefer Payment via bank wire, second option Paypal No Family and Friends.

**Possible trade Texan .457 LSS-CF

$1,200 including shipping CONUS only.
***will include three sealed tins of JSB Hades 500ct ea.***

Who out there has found a decent quality one piece droop mount at a cheap price? I'm looking to buy a dozen...maybe 2 dozen mounts, and a rws one at $40 a pop sure adds up! I have a couple of the hammers mount that I can regularly find at $18 per mount, they are DECENT....bit as far as I know they do not offer a droop mount.most of these rifles I plan to mount these on are break barrels, so I'm just assuming I should buy all droop compensating mounts, it has been my experience most all break barrels can get away with using a droop mount.

Picked this .25 500mm DRS up at my local shop today. (Shortly after the UPS man dropped off my new compressor) I went with the intention of buying the .25 in 600mm but when I saw the big plenum on the 500mm I just had to have it.

Excellent condition but please note the wood has flaked where the lower sling mount attaches.

Selling because haven’t had time to use it.

Everything photographed is included.

• Vector Veyron 4x16x44 FFP with quick release scope mounts so it’s easy to switch to iron sights (scope will likely need to be zero’d)
• Weihrauch silencer
• PG4-Steel Vortek HO Tune-kit w/ vac-seal installed. Will include original spring and extra breech seal.
• Sling mounts
• Flambeau case

Venmo/Paypal F&F/Cash app final sale only.

Asking $525 + shipping from California. (~$40 to Ohio)

Not interested in trades or partial sales.

Most videos talk about watching to see if your pellet is spiraling. I can't see my pellets in flight, even though I normally shooting at 16x? My backyard range is somewhat shaded which might be an issue? Would shooting them up at a clear sky be the answer? I can safely do this.

Thanks

Up for sale is my Airmaks Katran .22 Tube
.No leaks
.Hades @870
.small scuff by hammer adjuster
.comes with what you see (hawks scope, fx rings, 3 carm and 3 standard mags, single shot tray, full probe, pic rail piece and hard case.
.haven’t touched anything except hammer spring adjuster
.selling because I have a new Evol that does the same thing .
Asking $900 shipped PayPal f&f please

Vintage used Beeman R7 in .177 cal with SS1 Blue Ribbon scope for sale. This is an early pre-safety model with original dovetailed front sight and hood. The rifle has some imperfections, including what looks likes crosshatching to the back of the compression tube done by a previous owner. Also some remnants of epoxy are located around the same spot, but I was able to remove most of that. The scope covers up most the this. There is some rust freckling and rub marks on a few spots on the barrel, mainly at the tip. The rifle cocks and shoots just fine. The scope itself is in very good shape cosmetically and has a clear and visible reticle. The adjustment knobs have a few scuffs. Asking $300 shipped.

Their back again, I bought 2500rds and almost out of ammo again......lol

Finally, in order to achieve the required accuracy, the BSA hammer forged gradually choked barrel has been installed in the gun.

Initially I installed it in my RAW HM1000X for test purposes. Pics are here below.

This system allows indexing of the barrel too.



Following is the close up of 10 shots group at 24 yards at 950 fps using 18.13 grain JSB pellets. The outer dia of the group is around 6.51mm.

Following are more pics of the gun and also pics of indexable barrel system.


I have used O ring sealing system.

Long range accuracy shall be tested as we find a time slot.

Bhaur

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell an FX Impact M3 0.25 600mm in bronze w/ FX high capacity Side-Shot magazine w/ Orion insert, FX angled gauge bracket, Magpul grip, stainless steel bolts installed and factory FX hard case. This awesome rifle is currently set up to shoot 25.39g JSB's at 905fps with great consistency and accuracy. It also comes with a complete set of stainless steel bolts already installed (with anti-seize compound applied); these bolts not only look better - they'll wear better over time as they will not rust. All of the original black screws will be included as well if you want to reinstall those instead. The FX angled air gauge was added to make it easier to read the reg pressure while shooting and the original grip was upgraded to the Magpul beavertail AR grip.

This rifle is in excellent condition, holds air perfectly and shoots extremely well. The shroud and cheek rest were both carefully wrapped in automotive grade carbon fiber finish vinyl wrap - which looks awesome but can be easily removed without leaving any residue behind if you don't want it. I got this rifle and set it all up for my brother-in-law to take care of his squirrel problem but his wife is dead set against it so it's a no-go for him and now rifle needs to go on to live somewhere where it can have a purpose in life again!

Price is: $1700 shipped within the continental US (scope and mounts not included in the selling price...)

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here as well as dating back to the old Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

selling my brand new Ares 3-18. mounted it this morning but it makes the gun heavier then i wanted. will be double boxed. rings are not included. $520 $500 shipped. if you want better pictures let me know.

Thank you for looking !
I have the following Hi-lite for trade . I just do not use it as often as I thought I would lol .

My trade interest are

umarex airsaber X2 or airsaber

Edgun leshiy classic .177 350mm and .22 350mm barrels

it never hurts to ask haha!

If you make me a purchase offer it would be USPS M.O. with a hold until funds clear .
Her are the pics


It will come with the 2 aftermarket mags in the pictures . I personally do not like them haha.

Have A Great Day !

Is 357 too much for a squirrel at 35 yards?


Let's see the results from a body shot.

Entry



Exit



Split him open and smashed his shoulders apart. Here's the thing. No bloody mess, and ZERO movement after the shot. No tensing up, just rolled off the log and dropped to the group. I've never seen one just go limp like that.

I guess 130 fpe will do that though.

I'm going to cut him open soon to see the damage.