Have 7 tins 350 ct each. 4 JSB and 3 FX. These tins are not sealed. All pellets were sized by pellet gage. The JSB are 6.38, FX are 6.37. All scale weighed at 25.3 - 25.39g . All have been lubed with strike hold. $15 per tin. Will split in 2 groups, JSB or FX . Or you take them all for $95 PayPal F&F , conus. Thank you.

I have a brand new AEA SF in .30 caliber. $750 shipped to you (I paid $850 and it is literally brand new). Need to clean out some items to pay bills.

Dodging the rain and shooting in between gust I kept rotating through my rifles. I started with my squirrel gun for the first two lines. It's my Hw50 with a 4x Hawke centerfire scope. The second two rows are my first Weihrauch. A 177 Hw95. The last row is my green 177 Hw97. All these are five shots of 8.44s from the same tin at 25 yards.
The first storm passed and I grew some balls and took the 97 out to 50 yards. I shot these four targets with adjustments in between before the second storm had me packing in. The red dots are 3/4"

Here's me shooting the 97 at 50 yards in my typical positioning with the 97. Looks posed but it's not. I trigger this gun with my middle finger.
Lots of fun today,
Be well all.
Ron

Got some time with the Revere Safari today and really shoots these two pellets good @ 50 yrds. 6 shot groups, poly mags and crossmans not as good but acceptable

Yesterday

Finished Tuning/ Modding my notos. The goal is to get most power and most shot counts (Efficiency!) out of the factory air tube. Did I mention I hate plastic parts on any of my air rifles! So I removed the factory plastic rail and used a 11mm dovetail to picatinny rail adapter instead. The adapter looks pretty similar to the one on my Brocock sniper XR but shorter. For the power section I removed the factory valve poppet and used an after market delrin valve poppet. I also ordered the last available plenum / regulator gauge block from Canada. Tuned and smoothed out the trigger unit, Now it's putting out 28 shots at 21 FPE with JSB 15.89 GR (785fps average). Man this thing is a tack driver!

Ok, I haven't been shooting as much as I should and recently starting shooting again. Setup a target at 25 yards - laser verified from end of barrel to target.
Equipment used:
LabRadar
Laser Range Finder
Cadwell Shooting Table
Rifle:
Redwolf .22HP Polished Barrel, Hardened Parts for Gen2, Heliboard 11 volt, Bi-Pod, Rear Sand Bag
Pellets:
JSB Redesigned 25ish grain

Refill to 3,500 PSI - Power Level 12-5 shots, Power Level 11-5 Shots, Power Level 10-5 Shots, Power Level 9-5 Shots.
Refill to 3,500 PSI- Power Level 8-5 shots, Power Level 7- 5 Shots, Power Level 6-5 shots, Power Level 5-5 Shots
Refill to 3,500 PSI- Power Level 4-5 Shots, Power Level 3-5 Shots, Power Level 2-5 Shots, Power Level 1-5 Shots

Now granted I'm not a world class shooter, but 25 yards is nothing. I did learn the basics in Marine Corps Boot Camp and my 30-06 is sub-MOA, best I've done with her is 5 shots at 200 yards under 0.75".
Center to Center Measurements with Calipers

Power Level 12 - 1.320 X 0.644
Power Level 11 - 1.475 X 0.400
Power Level 10 - 0.981 X 1.229
Power Level 9 - 1.595 X 0.798
Power Level 8 - 1.303 X 0.964
Power Level 7 - 1.738 X 0.807
Power Level 6 - 0.904 X 0.588
Power Level 5 - 1.072 X 1.671
Power Level 4 - 0.672 X 1.450
Power Level 3 - 1.728 X 1.124
Power Level 2 - 0.208 X 1.540
Power Level 1 - 0.688 X 1.064

I then removed the moderator to see if it was any clipping going on. Visual inspection of the moderator, not taken apart, none noticed. 5 shots at Power Level 6, 7 and 8. No improvement.
I than refilled to 3,500 and shot 66 shots with the Moderator at the green target, WHAT A MESSSSSS.

Suggestions?

I had recharged the Battery Last month, so I guess I'll recharge the battery, clean the barrel and run it again.

Smitty

i have a Notos. Got it with a hand pump and thats not much fun.
I am looking to charge it with this blue scuba tank... i haven't gotten the tank yet, its out for re-cert at the moment.

How do you adapt a tank like that to the Notos? Can you point me to the right parts?

English walnut blank $250 shipped to conus the last pic has a Diana 75 traced out on it in red pen

Have for sale two AR 15 grips. I have replaced these that were on my EVOLS with after market ones for more bling. Buy both and price is 30 bucks plus shipping and PayPal fee. If you only want one the price is 18 bucks with shipping and PP fees. Like new condition and a dang good bargain. I only ship to the lower 48 states.
Thanks AGN and members, appreciate you.

How do you use the power wheel on your FX PCP airgun (Impact, Crown, etc…) with multiple settings? Or maybe the question is ‘do you ever use….? I’m not sure I fully understand the point of them yet. I have only gone through the tuning process on an Impact X and the video I watched only talked about tuning from the Max setting. Can the power wheels be set up such that you can use a different setting for different calibers without going through the full tuning process of setting regulator(s) and other dials in addition to the power wheel? For instance - can I have my Crown MKII set up with the .22 pellet barrel on one setting (Max) and then swap to a .177 barrel and only tune with the power wheel without going through regulator adjustments? Or is that not how the power wheels are designed to work?

Edit to add a question (below) about using the transfer port wheel.

Any thoughts on an accurate budget .22 pcp

Are there rules regarding refilling your PCP gun during a FT meet?

How do I contact a seller off the member classified. I am a very poor nerd! Want to buy but dont no how.

Looking to sell my Taipan Veteran gen1 in .25 cal. falx moderator from silent thunder ordinance included. Asking 1000 shipped. Scope is separate and can be included for 1200. 3305902221.

SOLD Want to sell: RTI Prophet II Performance .22 w/case. Purchased & received tuned from Talon Tunes on Feb 19, 2024. Like new condition. Need more pictures, just ask. $1195.00 shipped conus. Just not using a bench setup. Trade offers welcomed - compacts in .22.

Gents, Picked up my first PCP 1 year ago. Got the M16A (.22). My last air gun was the Sheridan pump (if that tells ya something)

Certainly not the most popular piece out there, but I have been impressed (thus far). Never tuned, just added a D-FL moderator, carbon tank & 3D printed adjustable butt piece & the Vortex DB 4-16. Been tracking approx 870 FPS using the JSB 18.13 gr. Does that sound right to you guys?

Curious how many of us on the boards own this model?

Cheers, Joe

Have an accutac br4 g2 bipod for sale. It's in good condition but don't have original box as it came with an impact I purchased.
$250

brand new rifle has reg removed has all 3 air tubes factory and factory shroude but barrle needs work done was in prosess makeing gun a carbean barrle needs recorwed and threaded ever thing is there except for the reg this is a project rifle brand new never fired [email protected] or 1 931 214 9829

NLA

I have this BRAND NEW in box BAT Moderator. It will fit any Lelya 2.0 or the standard size R5M Matadors. It is brand new, still in box (only took it out for picture) and has NEVER been mounted on a gun. I bought this directly from Wolfiek a short while ago and going to be selling my Lelya so I won't need this anymore (PM me if you're interested in the gun, post hasn't been made yet!)


It's flawless and the same thing as ordering new, except no wait for shipping from Spain. This will fit any caliber...cost $170~ new plus $20+ shipping to the US. Only way to get them anymore, and will soon be sold out for good and not being made anymore.

I will let it go for $175 shipped Save yourself $20 and wait time

Newest rifles just arrived...

I got this Beeman R9 .177 in immaculate condition as my backup. Turns out it’s making 13-13.5 FPE which is not what I was expecting. Beautiful rifle, but no longer need it.

No scope. Will ship in a cut foam box.

They don’t sell them in this wood stock configuration anymore.

$450 shipped TYD (signature required)