I picked up a 22 cal Diana bandit from another member a few months back. I’m just used to high end stuff. It’s not bad, just not for me. This outfit comes with a buckrail folding, adjustable stock. An alteros regulator, a Hawkeye red dot sight also from buckrail. 1 factory mag and 2 carm mags. And fill probe. I’ll throw in 3 tins of CPHP pellets and a hatsan bipod. The front buckrail section is cut, scratch marks on beginning of mod and a chip on the folding stock that’s not easy to find, but it’s in the pics- full disclosure. Anyways, $195 shipping included, PayPal F&F. Conus only , Negotiable, thank you.

View attachment IMG_6655.jpeg

View attachment IMG_6657.jpeg

View attachment IMG_6656.jpeg

View attachment 453665

View attachment IMG_6659.jpeg

View attachment IMG_6660.jpeg

View attachment IMG_6661.jpeg

Two Fx airguns over sized cocking handles. One is Brass other is aluminum with a cool blue tarnish. Both Knurled.
They fit the Impacts, Mavericks, Some Crowns/dreamlines depends on the stock used.

100.00 OBRO shipped for the pair

I'm getting out of the hobby and selling all my stuff.

For sale is a HW30 in .20 with Macari tuned and chopped by John in PA and barrel threaded w/ 1/2 unf with upgraded gold trigger. I bought this gun new from Airguns of Arizona before upgrading it. It started as a HW30 Deluxe. If you want this gun in .20 caliber in the US, you have to pay a premium for the Deluxe model and the caliber size from any of the dealers. At one point I had 6 different HW30s and changed one of the other stocks onto this one.

Gun also comes with a Bushnell Trophy scope made in japan 4-12 high contrast w/ AO, sports match rings, Donny FL tanto, and nice UTG case (see pics). Does NOT come with any of the shooting bags.

I'm only selling this all as a set so I don't have to make multiple transactions.

Price is $450 $500 shipped firm. PayPal F&F or add 3%.

No trades.

For those with a 700 or 800 barrel what do you use for a
pull thru cleaner and where do you find one?
Thanks for your time!
Pete

The two large gages are 1/8 NPT and are Airtanks forsale aka Joe Broncado Gages. They work extremely well and are bran new. I use them in my Airforce rifles

The 3 digital gages were bought from huma air. 2 are bran new unused and one was used to test reg pressures when needed. All are 1/8 bsp

All gages work as they should. All digital gages will come with a battery in them they also have protective sleeves/covers

150.00 shipped for the lot.

Not my video.

... so in my recent Internet travels I saw a remark , that Umarex , though a German company and based in Germany, does not actually manufacture their air guns in Germany. I heard Taiwan (verified), and possibly other countries. I was pretty much salivating at the thought of getting a German made gun, or several. Any thoughts?

I bought this Walther PPQ replica from Gunbroker.com a while back, and never even questioned that the gun was a German made unit. Did not look at the packaging at all really (cheap plastic pkg) and any manual that may have come, lost on the boat somewhere. I guess it's probably Taiwan made

Hello everyone. I’m in the process of buying a pcp for the second time. First time was nearly ten years ago, and never really used my Marauder so I sold it. Jump ahead nearly ten years. I’m looking again to get a pcp, this time for deer hunting. I live in Florida, sold my browning bar .270, (I may have been stupid for doing that). Pretty much would like recommendations on what caliber to get and what brand. I have been researching a lot so I’m not totally clueless, but just wanted opinions on what would be worth my money. If they make one, is there any that could possibly be dialed down to small game hunt them turned up and used for deer? If not then that’s ok. I have other guns for small game if I had to.

You are on the bird feeder. Sparrows won't show up.

So this guy Maurice and his pistol that defies the laws of physics has been discussed before.
Since then there has been no update and he ignored all my inquiry emails.

He is now accepting "donations"

I remember there were a couple of members who know this guy in person and such.

Is he really a scammer? Does anybody know what's going on or can reach him?

the following is the link to his pistol


Thanks in advance for anyone who can chime in.

In case anyone is not aware Strelok pro is no longer available to download. So if you have it on your phone or whatever, do not delete it as you can not get it back,

For some reason I deleted it, and I went looking to download once again and it is gone.

I've had my Revere for 6 months now and about a month ago the cocking lever started to pop open after firing a shot. The screw where it pivots was loose and after tightening it the lever would stay closed after a shot. It is doing it again, and I have tightened the screw again. Has anyone else encountered this?

Hey folks, I have read several threads and watched AEAC Vlogs about tuning FX airguns with dual AMP regs.

After going through a bit of a problem with my Wildcat MK3 when it was out of commission for a week or so, I got a chance to fix it and play around with the regulators and HS adjustment today.

So, what does the following data tell me? I am so new to the PCP world that I am not sure if the results I share below are good or is there something else that could be done to make the gun more efficient overall.

DATA:
Caliber: .30
Barrel: 600mm
Front regulator: 145 bar
Rear regulator: 115 bar
PW: 7
HS: 1 and 1/2 turn CCW from absolute bottom. (I tried turning it counterclockwise more but it did not gain me additional FPS) Eventually, I turned the HS 6 turns CCW (testing fps after each full turn) and FPS started to drop.

Currently shooting JSB 44.75 grain at 875fps (ES 10 fps over 75 shots) at PW7. This yields 72-75 shots from 250 bar down to 115 bar.

If I turn the PW to 6, my average fps is around 850fps. PW 5 yields around 820fps and so forth.

I am happy with the results as far as accuracy at 40 yards (max range for what I use it for, hunting/pest control). I believe the shot count is great for a .30 cal producing 76fpe.

However, being so new to the PCP world, I am of the thought that I do not know what I do not know.

So is there anything that I need to do to fine tune this rifle or did I find a sweet spot for my needs?

Thanks and if all this sounds like I am being OCD, let me know.

Gently used Pard NV008 day and night vision optic, together with battery, case, instruction manual, and sd card. I upgraded the firmware to the version right before they eliminated the laser.

Zoom has two settings (6.5 and 13X), although there is a picture in picture feature. The built in IR torch has multiple settings and the reticle form and color is adjustable

Price is $415.00 shipped to CONUS. If you use Paypal either send F&F or add 4% to the purchase price. Bank checks or money orders work too.

View attachment DSCF7523.JPG

View attachment DSCF7524.JPG

View attachment DSCF7520.JPG

View attachment DSCF7522.JPG

What's your opinion? Should Evanix come out with some fully-automatic PCP rifles again? Not the same ones, but something new. The ones in this video are 10 years old now. I think they stopped making them due to political reasons surrounding certian events...and now 10 years later people are gushing about a Western Rattler that does 1.5 inch groups at 50 yards on semi auto.... huh??? I think it's time for Evanix to do Full-Auto again.


Here is a close up look at the 9mm GTL480 Select Fire

Benjamin Marauder Pistol/Rifle with 3-9x bugbuster in .22 cal. Great condition and very accurate. Awesome choice for a youth rifle using the included rifle stock attachment. No issues with the gun. Everything pictured is included for $300 OBO including shipping.
I will accept PayPal friends and family or add the fees.

He had it coming, so I gave it to him! FX Maverick VP .30cal slinging 50gr H&N Slug II at 920fps. I used the ATN X-Sight 5 5-25x LRF with the built-in Ballistic Calculator, and it was dead on the money and dropped that slug right into the chest.

I just got some pellets from Amazon. Not the first time I've ordered from them and it probably will not be the last. There is a dent in the bottom of the tin as you can probably see in the picture. But the pellets look fine. They shipped in a lightly padded bag. I don't expect the pellets to arrive in pristine tins. But most of my orders have contained pellets in pretty good shape, like these. The tins that looked mangled got sent back.

But the reason I order from Amazon is I can get them fast. This tin cost me the same per tin as the best price I saw from other sources. Amazon included shipping, however, and the others did not. So it didn't cost me extra. I ordered 5 tins from another retailer Friday afternoon and they haven't shipped yet. I ordered this tin Saturday (when I saw the other order hadn't shipped) and it arrived today. I think 1-2 day delivery is worth something too.

Their price is not always as good as I got on this order and I would worry the chance of damage would be greater on a larger (and heavier) order. But for a tin or two, especially if I need them quickly, I think amazon is a viable option.

It's occurred to me that over the past 7 or 8 years I've been into airguns & the time on this forum that I must have spent a couple hundred dollars sending parts to people in need, either those near the beginning of the learning curve or someone having an "airgun emergency" or something like that. One of the BEST things AGN has given to me is being able to be of service! I love this Sport, Hobbie, Activity, Obsession, Addiction (either or ALL of those for me) & the sharing of needed parts or knowledge I've accrued. I've made some great friends & hunting pals over the years. Invaluable stuff! Though my intended purpose was to help out, not seeking anything in return (other than it makes me feel good to do so) some great, unintended things have come my way. I've been "gifted" scopes, compressors, a GREAT airgun, gun cases, couple bipods, etc. More things than I can remember. But still, for me, the BEST has been the camaraderie & friendships. Those came through helping out & being helped out by others.

So people, especially the ones just starting to learn, keep remembering to pay it forward if someone's been kind & helpful. Build those Karma credits. You'll be glad & grateful you did & that you got to help someone else on this journey. It can be a truly rewarding experience!

I have a beautiful RAW 1000 HW in 22 cal that is in showroom condition. It is the tan composite stock. I bought a new RAW 25 chassis rifle and would like to sell this one. It comes with a carrying case. I bought it two years ago and have not shot it that much. Pictures are available. Please text me at 951-420-2180 for details. Comes with two magazines.
Price is $1400.

I have a 6 year old carbon tank and Joe Brancato TJ3 valve that was just sucessfully hydro tested.
i asked them to fill it and was told there was some issue with their compressor, so i ended with 2900 PSI.
took it home and didnt touch it for weeks. Tank held air without issue.
went to local paintball shop for 4500 PSI fill and when he hooked it up, the tank wont take any air.
I have gone to this shop before. We verified they had 4500 PSI upstream and filled several other tanks to be sure.
Opened the valve to let some air out several times without issue.
Back on fill whip and nothing.
Any ideas on the issue here? How could removing the valve hydro testing and reinstalling have caused this?
thanks in advance

Bob

I bought this FX Ranchero from the AOA pre-owned section. It was in rough condition and priced accordingly so I took a chance knowing I’d have to do some work to restore it. First thing I noticed was it held air and was mechanically sound except for a weak spring which held the cocking lever shut. Sweet! All I had to worry about was the cosmetics. The barrel shroud bluing had a pea sized blemish that I tried to touch up with cold blue but it didn’t turn out good so I stripped it down and bought some alumahyde. Took me a few tries to get a smooth coat of alumahyde. The brass parts had a good amount of patina that came off easily with some Brasso. Next I stripped the old finish off the grip, steamed out some dents and sanded it down. The factory finish was hiding some beautiful figuring in the wood. I didn’t even know it was Walnut! I was going to finish with tru-oil but wanted something that didn’t look cheap so I went with a few coats of Danish oil for a nice matte finish.



Share your airgun restoration projects!

I have a few scopes that are just sitting in my safe. All prices will include shipping.
1) Arken 6-24x50 FFP-MOA asking 300
2) Athlon 4-14x44 SFP MIL , has scratches on turret, but doesn't affect the scope. Asking 150.
3) Leupold 3-9x40 SFP asking 100. (Sold)

Any questions or need more pictures, please let me know. Thanks for looking

Got my TX200 back from Steve H. HE Installed a Tony Leach kit. I am very happy with the kit. Here are some pictures. Now I have to decide what stock to use

Got a new permission I'm going to this week.....I decided to re-tune my Cricket with the new moderator I made for the Nielsen 17.5 grain slugs, I got them going around 930-940 fps. and they are shooting Awesome, I'm planning on putting the Smack Down on some birds.....

This is the last five shot group I shot with it at 50 yards with some mild wind......