FX Impact M3 600mm .22
these are average groups at 50 yards.
JSB 18gr +-900fps
light wind from 12:00
Between 6-8 rounds per dot, about the size of a dime

So I took a huma-air reg and used an amp piston and a slightly altered huma spring stack and it has been the most consistent fastest responding setup I have ever used and I’m using it on a 300bar fill single reg setup and it’s flawless has anyone ever tried this before? What combos do most people run

Is the Mordax worth the extra investment?
I’m considering purchasing one of these, and both seem to perform well, each with its own advantages and drawbacks.

What stands out to me about the Mordax is the full-auto capability and the removable magazine, which are pretty appealing features. On the other hand, the Huben’s more affordable price tag is definitely a factor to consider.


From what I’ve gathered, both can handle slugs (correct me if I am wrong), so performance in that regard seems comparable. However, I’ve heard that not just any air compressor can handle the pressure needed to fully charge the Huben’s cylinder, which could be a downside if you don't already have a high-pressure compressor.

Also, I would like to know:
1-if optics needed if you are just going for 30 yard.
2- what could be the reason of the unremovable magazine for GK1?
3- If they both take slugs is it more beneficial to get the .22 instead of .25?

What I’m uncertain about is the long-term durability of either brand. If you have any experience or insights on this, I’d love to hear why you might prefer one over the other.

Purpose: Pest control
Caliber: .22 or .25

Custom paint job on my Notos. Name a better more affordable airgun. I bet you can’t!

This is my first air rifle I just put together. Shoots pretty flat out to 60 yards, at 100 yards have to hold 2 moa. The Notos is a great bang for buck. I did the buck rail lower, skeleton folding stock, plenum kit, silent thunder ordnance falx suppressor, and a cheap fixed 3x discovery scope.

View attachment IMG_0494.HEIC

View attachment IMG_0497.HEIC

View attachment IMG_0334.HEIC

Curious as to what some of your missed opportunities have been here. I check the classifieds daily unless I'm on a trip and have had a few items that have slipped through my fingers due to me waiting, procrastinating or just not being fast enough.

Three that come to mind.
1. An early BSA Lightning. I'm not sure why, but I've always loved the look of them. Saw one and pondered... and it was gone.
2. AirMax Katran in .177. I looked and looked at it. Just didnt have a need for it and still dont, but dang it was purdy.
3. A Texan 308 in white cam that I missed. I'll blame it on Helene as during the blackout, I decided if it was still available when I got internet back, I'd get it...but it wasnt. Another 'dont need it', but wanted it.

There is another gun right now that I've eyeballed in the classifieds that I typed up a msg to the seller twice now and didnt hit send. I just dont need it and cant justify it.

What are some that yall have missed out on that are memorable?

Would I be doing myself a disservice by getting a .177 in 600m? I'm learning a small bit more towards that because of shot count, quietness, as well as I have 100 yard (91.44 m) private range and indoor 100 near me. If I do any hunting with will be small game only up to a rabbit. The other option is 22 in 700 mm. Obviously, which whichever I choose ill be getting a barrel of the other caliber.

Edit: I have no power restrictions, I am in Florida.

Beeman R7, .177, San Raphael serial # 898372 from 1980, pre safety, original front and rear sights, excellent metal and stock, never disassembled....$350 includes shipping in CONUS

Looking for a good mid range first PCP. I like Daystate or Brocock. Don't really want to start out with top of the line but have a friend who just ordered an Impact M4 and don't want him to out shoot me. I have read reviews on lots of guns but maybe I have read to many. Mostly would do target shooting up to 100 yards and some bird hunting. Thanks for the input.

***SOLD***Air Arms HFT 500 .177 caliber has had Lane regulator installed, includes Rowan Engineering air stripper. Forster male fitting installed, moderator. very accurate rifle.
***Scope, rings,level, bipod not included.***
$860.00 SHIPPED

I realize that cold weather will cause a decrease in FPS. However, I’m not sure what is considered on average a “normal” or “acceptable” drop in fps. I’ve lived in Florida for the last 20 years where the weather is quite warm even during winter time. However, in Arkansas, the winters are considerably colder.

On August 13,2024, the temperature was about 82°F. My 28 shot string with my FX M3 showed an average FPS of 891 with extreme spread of 5 FPS and STD Deviation of 1.7 FPS. Today, the temperature is about 40°F. I shot myFX M3 in the colder weather, and my average FPS was 781 FPS with extreme spread of 54 FPS and STD Deviation of 12.4FPS.

When I shot my FX impact M2, there was very little change in the fps or extreme spread or std deviation whether in cold or hot weather.

I know that the M3 has a dual regulator snd the M2 doesn’t, but are these results typical for the M3 in colder weather? I also shot my FX Pantera in .25 caliber and only the first shot had a drop in FPS but then all other shots were consistent and had good extreme spread and low standard deviation. I also shot my Daystate Alpha Wolf and it was consistent without any drop in the FPS. Maybe the FX impact M3 behaves this way in cold weather? Has anyone else experience a similar situation? Any advice would be appreciated.

August 13, 2024 FX M3, JSB Exact Heavy 18.13gr

Shot count: 28
Low: 889 FPS
Hi: 894 FPS
Avg: 891 FPS
Spread: 5 FPS
STD Dev: 1.7 FPS


13-Aug-2024 17:59:20,889,FPS,31.6,FT Lbs,

13-Aug-2024 17:59:28,889,FPS,31.6,FT Lbs,

13-Aug-2024 17:59:37,889,FPS,31.6,FT Lbs,

13-Aug-2024 17:59:47,891,FPS,31.7,FT Lbs,

13-Aug-2024 18:00:03,889,FPS,31.6,FT Lbs,

13-Aug-2024 18:00:15,891,FPS,31.7,FT Lbs,

13-Aug-2024 18:00:23,890,FPS,31.7,FT Lbs,

13-Aug-2024 18:00:34,893,FPS,31.9,FT Lbs,

13-Aug-2024 18:00:46,893,FPS,31.9,FT Lbs,

13-Aug-2024 18:00:56,889,FPS,31.6,FT Lbs,

13-Aug-2024 18:01:05,894,FPS,32.0,FT Lbs,

13-Aug-2024 18:01:26,891,FPS,31.7,FT Lbs,

13-Aug-2024 18:01:35,889,FPS,31.6,FT Lbs,

13-Aug-2024 18:01:46,891,FPS,31.7,FT Lbs,

13-Aug-2024 18:02:15,889,FPS,31.6,FT Lbs,

13-Aug-2024 18:02:29,890,FPS,31.7,FT Lbs,

13-Aug-2024 18:02:37,890,FPS,31.7,FT Lbs,

13-Aug-2024 18:02:46,891,FPS,31.7,FT Lbs,

13-Aug-2024 18:02:53,893,FPS,31.9,FT Lbs,

13-Aug-2024 18:03:06,890,FPS,31.7,FT Lbs,

13-Aug-2024 18:03:15,890,FPS,31.7,FT Lbs,

13-Aug-2024 18:03:23,891,FPS,31.7,FT Lbs,

13-Aug-2024 18:03:31,889,FPS,31.6,FT Lbs,

13-Aug-2024 18:03:38,893,FPS,31.9,FT Lbs,

13-Aug-2024 18:03:47,894,FPS,32.0,FT Lbs,

13-Aug-2024 18:04:00,893,FPS,31.9,FT Lbs,

13-Aug-2024 18:04:09,893,FPS,31.9,FT Lbs,

13-Aug-2024 18:04:18,890,FPS,31.7,FT Lbs,


January 5, 2025 : FX M3 Airgun, JSB Exact Heavy 18.13gr

Shot count: 24
Low: 751 FPS
Hi: 805 FPS
Avg: 781 FPS
Spread: 54 FPS
STD Dev: 12.9 FPS

05-Jan-2025 09:40:15,751,FPS,22.5,FT Lbs,

05-Jan-2025 09:40:28,770,FPS,23.7,FT Lbs,

05-Jan-2025 09:40:39,770,FPS,23.7,FT Lbs,

05-Jan-2025 09:40:55,772,FPS,23.8,FT Lbs,

05-Jan-2025 09:41:20,762,FPS,23.2,FT Lbs,

05-Jan-2025 09:41:29,765,FPS,23.4,FT Lbs,

05-Jan-2025 09:41:42,770,FPS,23.7,FT Lbs,

05-Jan-2025 09:41:54,785,FPS,24.6,FT Lbs,

05-Jan-2025 09:42:15,773,FPS,23.9,FT Lbs,

05-Jan-2025 09:42:27,782,FPS,24.4,FT Lbs,

05-Jan-2025 09:42:42,778,FPS,24.2,FT Lbs,

05-Jan-2025 09:42:57,777,FPS,24.1,FT Lbs,

05-Jan-2025 09:43:12,791,FPS,25.0,FT Lbs,

05-Jan-2025 09:43:28,791,FPS,25.0,FT Lbs,

05-Jan-2025 09:43:40,786,FPS,24.7,FT Lbs,

05-Jan-2025 09:44:08,791,FPS,25.0,FT Lbs,

05-Jan-2025 09:44:19,793,FPS,25.1,FT Lbs,

05-Jan-2025 09:44:32,772,FPS,23.8,FT Lbs,

05-Jan-2025 09:44:42,786,FPS,24.7,FT Lbs,

05-Jan-2025 09:45:00,791,FPS,25.0,FT Lbs,

05-Jan-2025 09:45:11,805,FPS,25.9,FT Lbs,

05-Jan-2025 09:45:23,798,FPS,25.5,FT Lbs,

05-Jan-2025 09:45:36,795,FPS,25.3,FT Lbs,

05-Jan-2025 09:45:49,795,FPS,25.3,FT Lbs,

Bone stock, only addition is a barrel band. Includes DFL FX moderator and 2 magazines, does not come with end cap. Holds air perfectly, currently tuned to shoot the JSB Heavy 33.95 pellets. Will ship in original FX hard case CONUS only, for $1600. Payment via PP F&F or buyer pays fee.

At the dismantling of the headstock, it appeared to me that Hatsan factory has to monitor their assembly line on
overtightening and alignment of the plastic screws.

To solve the misaligned screw, i drilled a new hole in the opposite direction (downwards) and to fix the smaller screw, i fit in a bigger one after fist
trimmed the head-diameter

Hey Guys,
Very Basic question regarding the "newest version" of the RAW HM1000X:

- The pellet probe housing no longer has the two tiny set-screws, allowing the pellet probe to be removed when changing calibers?

I want to my .177 caliber barrel and have the .177 cal. probe .... I'm sure RAW didn't discontinue the ability to change out calibers ... just wondering .

Since RAW never produces schematics ........... it's my current puzzle .

(yes yucky is a technical term )

Next 24 hours is freezing rain snow mix and 10 to 15 mph winds ! Doesn't look like much accumulation but still yucky ! Another odd thing is after 5 pm the temps will rise to 47 @ midnight ??? then back down for snow flurries in the AM
Stan in KY

Hey guys it's been awhile. Yes I'm good just been taking a break again like the last few winters. This one has been very hard weather wise on us for the dairy but we're hanging on.

Anyways at a New Years party the other day I had 2 people asking about airguns. They wanted my opinion on what would be a good gun in the $1000-$1500 range to get into. Something just to shoot and not need to mess around with.

Obviously I'm biased and think Taipan. But I'd love some other options out there in that price range that are solid and dependable. Anything new come out recently? I don't think they'd want used even though I mentioned it's a big savings over new usually.

I have several questions regarding my HW 97k that someone my be able to answer.

If I forget to put a pellet in the chamber and close the action can I reopen it? Do I have to take the safety off in order to open it?

If I have a pellet in the action and take the safety off, can I put the safety back on?

What damage if any will occur if the rifle is fired without a pellet in the chamber?

(Bran new)Kraford & Lypt Fx Panthera AR stock adapter

A☆B Arms grip AR style

Brass cocking handle grip (orings can be removed) adds grip

Gen 1 no longer made Fx Panthera over barrel rail with weaver rail. New was a take off.


100.00 shipped CONUS

After pondering some Occam’s Razor angle. … and dealing with the blast of artic air . I’ve have been puttering at best with a back of a 87 year old mule. Getting old isn’t for the weak.
Still working on finishing the Thunderbird build. It’s the second gun from the Firefox project . (Like Jurasic Park, there were two islands) .

When I built the Firefox ,I made two or three of most parts for testing and back up. I’ve settled on piston and spring set up and am waiting on LW TO GET barrels in stock..

Its blacked and waiting for ambition and warmth.

On a new note ,I’ve designed a ground up build of a whole new gun.. No manufacture has used this size tube or stroke set up. Not 25mm, not 26 ,mm not 27,28,29, 30. It’s not bigger.

Ill do a post later on details after final assembly. It’s a .22 with all the traits of every gun I’ve owned or worked on using the best of. Everything will be hand built except forks which I modified and re designed for a short transfer port design. Most Break barrels , have 15 mm long ports , inefficient they are. There is some WEBLEY,HW,AA … thoughts in this one. Ultimate 17 to 20 ft lb gun cocking easier than a R9


ITS BUILT WITH USA TUBE. And Remember , there’s only one angle,” the conniving bitch angle“. Got to love old Occam…

Hopefully weather breaks soon





stock pattern is cut for the proto gunand final grip shaving is in process.

I know its a dumb and silly simple test but maybe someone is not sure how its done and finds this video helpful..

other wise disregard this vid and have fun with your new compressor

I have the opportunity to buy an early Raw HM1000x with a stock made by Rutherford its company.
Will buy it remotely so cannot inspect it butt it looks beautiful on the pictures.

I also have a HM1000x from 2017 that shoots very nice and has te offset silencer, believe this was made in the last year Rutherford owned the company.
It's a .25 and I have a .30 and a .22 set that can be placed in this airgun.

Where there any differences in the block or internals like the prope between the early models and the 2017 models.
Reason for asking is that I want to exchange sets with between these guns.

I decided to take another look at the messed up Huma raptor regulator that came with the Epic and took a look this time at the washer order.

It was in this order
())))) that's two facing and five back to front counting the second washer in line. Is that weird or is that a thing now?
I reordered them since it was 6 total ()()() I'm waiting for the this to settle a while and cross my fingers but has anyone seen this config in a reg from Huma or any other regulator? I haven't

hi guys

i am on a shopping spree

haven't gotten my newly bought dreamlite .30cal delivered yet but already thinking of getting a second airgun and what a gun that is- the lovely edgun leashy2 .22cal with 350mm barrel--

please share your thoughts on the gun if you have it or not..

please compare to my new dreamlite and tell me if i made a poor choice with the fx and if the edgun is better and why?

even if i get the edgun thanks to your input- i will still keep the dreamlite because of the large .30cal... the edgun is more for small game (birds) and plinking but also the semi auto makes me wet.. and the design.. and precision from short barrel.. and the looks,,,

ok- i need to shut it.. just let me know your thoughts on that purchase

thanks

Hello, I am letting go of my Leshiy 2. To be honest it's just too much gun in the 9mm .35 cal for my backyard fun. It's an awesome rifle and I sunk a bunch of money in it right out of the gate. But, I really prefer to punch paper with 22 cal stuff. It has the 450mm barrel, a 4-24x50mm Vortex Strike Eagle scope with Warne 20moa cantilever scope base, red dot open top reflex sight, a $250 custom laminate grip, UTG 360 Recon Bipod, 3-9mm magazines, 2 mag holders in blue to match the grip, the 460cc monster bottle upgrade, an additional carbon fiber handguard shroud for longer barrels, a 700mm .30 cal FX barrel with superior liner and FX/Leshiy brass barrel adapter, and an adjustable carbon fiber shroud for FX barrels from 500-700mm with a Behemoth tri-lug adapter on it as well. I haven't messed with it. It's set as it was shipped. Very powerful and accurate. I do not have any 30 caliber magazines. I purchased it from Edgun West about a year ago and was picking up parts to convert it to a 30 caliber. Which, is why I have the additional shrouds and barrel. All you would need is a .30 caliber magazine and you basically have 2 rifles in one. I'm not expecting to get back the mountain of money I put in this rifle, but I'm also not going to give it away either. I have right at $5,000 invested in this setup. I'll accept $3,750 Paypal f&f, or Goods and Services add 5% for the fees. Shipping is included in the price inside the United States. You can PM me or I'm happy to chat call/text at (870) 450-8479 (Brett Williams-Columbia Missouri)