NEW SABER RAIL CAN BE USED ON IMPACTS AND ANY RTI REALLY WORKS WELL PLUS ANY OTHER GUNS WITH RAILS AGT GUNS AND MORE 65 SHIPPED LNIB

Rifle and Optics Toolkit with All-in-One Torque Driver as new ​

SOLD

Advice for filming pellet wobble please.
I’m not wanting to film slow motion hunting but would like to check spiral wobble for different projectiles on targets.
Options-
I have a Sony A6400 which will do 120fps. Could arrange it ‘through scope’ or besides gun with telephoto lens.
Also could buy a GoPro with 240fps and arrange (3D print) a through scope system (don’t really need a side view system).

Anyway advice please.

John in Pa tuned w/documentation, Rowan Engineering Adj. butt pad, will be shipped in a hard case. When was the last time you saw a 97 like this? sweet shooter...$450 + shipping. You want the Hawke Endurance/BKL rings add $250. USPS money order only. Couple of good money order transactions on AGN, tons of transactions on GTA.

Hello. I am brand new here. I am posting because my son has become interested in air rifle shooting. He is in 9th grade and joined the JROTC at his school. Now he is getting involved in the air rifle team. They use the Crosman Challenger .177 air rifles. I would like to get him his own to use, but see that they can be quite expensive. I am just wondering if anyone here might have input on this type of rifle or different brands that are comparable. I can get it reconditioned if needed.

Thanks,
Tom

New, never installed and not getting around to it any time soon. Time to cut it loose.

$85 OBO shipped CONUS, paypal f&f preferred, add $10 for money orders.

I got my HW 77 back in action after the spring broke. Bought a Vortec kit and tuned it myself,

Finally had time to camo up the Concept XR. I'll be much more stealthy this weekend then last weekend. Squirrels beware.

Hi, Im new to this forum and to the world of Airguning as a whole. I am trying to get into it and finally managed to save enough to get a used M3.

Do you have any recommendations on accessories that are with the investment? I hope to one day compete at RMAC.

Also if anyone is from Santa Barbara California area, Love to connect.

Hi. I own an air rifle that was built by someone that was in the US from Germany. He was unable to take it back to Germany. I'm not finding anything on the components to tell me who made any of it. I'm sure he didn't make all the parts himself though I think he made some. It seems to be a 22 cal. It fires 22 cal pellets. I don't know how well yet. Can anyone identify anything on this gun?

Thanks,
Rob

Looking to sell this FX Impact X in .25. This Impact currently has a 700mm Superior Heavy Liner with sleeve, carbon fiber tube over the barrel, 480cc bottle, Saber Tactical buttstock, Wika gauges, extended picatinny rail (the rail was filed in 2 slots to fit a rail extender), High Power spring kit set up to shoot 36-37gn slugs around 1000fps, FX/DonnyFl moderator, Saber Tactical action block, Ernest’s short throw lever, and Power Plenum. I am including the 700mm standard pellet liner, original shroud, original bottom rail, pellet spring kit, and some miscellaneous factory parts. The rifle will come with 4 factory older style mags and 2 Side Shot plastic mags. The pellet liner has about 10 tins of 34gn MK2 pellets through it and the Superior Heavy liner about 30 slugs. The regulator has been replaced with a standard power Huma, the power wheel is a Monster Design, and there’s no leaks. I was starting to slug tune the rifle before RMAC but had another slug gun to get ready so you’ll need to tune it yourself or change it back to a pellet shooter if you desire. Have any questions DM me. Sale within the USA only, PayPal FF preferred, the rifle will ship UPS Ground with Insurance. I can do a local sale if you live within the Central Valley California area. No trades please.


Asking $1500 Sold!

I do have a Vortex Diamondback Tact 6-24 FFP scope with Warne mount I can include for an additional cost.

Looking at purchasing a couple AEA's as my 1st pcp's. Several dealers on the web but keep going back to The Pellet Shop. Not knowing this industry at all is this a good place to purchase??

7 tins of 22 cal JSB slugs 80.00 shipped conus Thanks Catman

Sales Rules:

• I accept PayPal or Venmo - F&F only. Not my preference, but will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price via UPS Ground. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Ninja 90ci (approx 1L) air tank. DOT approved for dive shop fills. Prod date 01/2018 so still has 1 year + before needing a hydro. Comes with Ninja EZ Fill valve.

Price $175 - SPF

View attachment 295674
View attachment 295675
View attachment 295676

Oh NO! I've done it this time. I love springers. They have soul. There's just something about them. Diana, Air Arms, Wierauch.... Well a few days ago I went and bought an AirForce Texan .510 with all the accessories... and now I've ruined myself for springers. My daydreams are full of PBBA Shotguns, Evanix .50 pistols, I've got Buck Fever a month ahead of schedule, and you would not believe what I've done to my "solid" steel backstop. I think I need a support group. I don't even know who I am anymore.

This just croaked on me. It runs but will not put air into a gun. Sounds stupid I know. There is air coming out the tube but neither my FX or Uragan will increase in air pressure no matter how long the compressor runs. Trouble is that I do not remember how hard of a stream came out when it was new. It is a tiny amount now but it does put out. Benjamin/Crosman/ Velocity or whatever they call themselves cannot find this model in their literature as of today. They are looking everywhere or so they say but can find nothing. Also, a power cord that comes with it fits so loosely into its socket that it sometimes falls out. As I said, it does not work. I will sell it for $30 shipping paid to the 48 continental states and that is just to make sure my shipping is covered. Comes with the compressor and the power inverter. It was designed to run from 110 volts or your car battery. The model number in the title is correct. Benjamin kept wanting it to be a BPTC 4500 but that is not it.

I started shooting 10m but couldn't see my hits without actually walking over which gets annoying pretty quickly. I wanted to get a legitimate 10m scoring system but then I saw how much they cost and would rather buy 4 more springers for that kind of money so I went with the next best thing I could find.





It syncs right up to my phone and/or tablet and I can now spot myself while I shoot. With the camera setup directly in front of the target I can see the whole thing or just zoom in and watch the individual targets (the obvious solution). The best part is that it only $27 and insanely easy to setup.

(Please forgive my poor shooting here I have a pretty valid excuse for it. I'm not good lol. Now that I can see for sure where my shots are landing I hope to fix that though!)

MINT CONDITION Edgun Lelya .22 I purchased this gun new and I have shot approximately 200 pellets through it. It loves JSB 18.13 and is crazy accurate. My backyard is only 30 yards but it will easily shoot 3/8 groups and I don't claim to be that great of a shot. The gun will come to you just like I received it. It will come in the original box with all of the documentation that was sent with it. This gun doesn't have a mark on it. As you can see i have added some carbon fiber tape that is for looks only. The tape isn't hiding anything.

Here's what's included. Gun 1,680.00 value, Two cheek pieces (the one in the pics i purchased with the carbon fiber look, it will also include the factory cheek piece that is in new condition, 2 bidpod mounting accessories (these were 40.00 each), atlas CLONE bipod that i paid 30.00 for, extra magazine 30.00 value, and UTG Accushot 4-16X44 SWAT IE scope 200.00 value. All in I have $2,050 invested in the gun and accessories.

Asking price is $1,450 with all mentioned above.

I'm only selling this to help fund a new LH AAA Evol Paradigm.

You won't be able to tell this gun from a new one! Feel free to PM me or call or text me at 405-664-4695.

Hi everyone,

I recently picked up an AV Avenger for my first PCP rifle. I have it paired up with a Sightmark Wraith for the optic and also have a DonnyFL suppressor along with the barrel adapter. The thing is a tack driver and I can consistently hit the same pellet hole on target with rifle.

The problem happens when I fill the gun. I fill up to about 3900-4000 psi, I have the regulator set to 2600. After dry firing about 5 times to settle things in, the shots are usually off zero from about an inch. It doesn't always happen, but its definitely air fill related and happens after. I'm assuming its barrel band related right now so I went ahead and ordered the Black Arts barrel band kit. Anyone have some thoughts on this issue? It drives me crazy after having a perfect zero and then having to redo it.

The pellets I have my initial zero with are the JSB Jumbo Heavy's.
Ammo used:
18.13gr JSB Jumbo Heavys @936 fps
18.52 H&N Barracuda Hunter Extreme @916 fps
20.2 Nielsen slugs @847 fps

Just looking for some info from others' experience. My R9 is 0.177 cal. Curious from other R9/HW95 owners what they have found the most accurate pellet(s) to be. So far for the ones I've tested 1st place are the JSB RS's in 7.33gr (0.24" CTC @ 10m). Second and third place tie for H&N Match Finale 8.18gr & H&N Baracuda Field Targets 9.57gr (both 0.26" CTC @ 10m). Regards

Has anybody received any tracking from this member at his AGN sales ad? I wonder if I got bamboozled?
Perhaps the seller is slow in shipping. However, the seller has made no contact with me after leaving a PM and cell phone message.
I purchased the air tank on Saturday Oct 15th and its been 5 days with no contact from the seller named "nirinium"

Or maybe I am just anxious or paranoid?


Rod in San Francisco

Idk with all These different companies coming out with semi auto guns is there a chance that FX tries semi?

My local Scheels had a high pressure Benjamin HPP2K a month or so ago. It was on the top shelf and I inquired how much it cost. The salesman told me $250 I said okay and walked off. A couple weeks later I was in the store again and thought I should probably buy the pump as a back up just in case item to have. I went back by the air gun section and damn if the pump wasn't sold. I thought a day late and a dollar short as always. Well today I was back at Scheels and thought I would just mosey on by the air gun rack again and to my surprise there were two pumps and one had a Final Sale Tag on it the other in the box. The Final Sale Tag was clearance due to missing box the tag says Never Used. I got the pump for $208 after tax out the door. I am really hoping never to use the pump because I have a 60min Carbon Fiber Tank but you never know when the need may arise. I think I did good!

I just wanted to give an update on the scam incident thanks to Martymcfly for posting the known scammer list I printed it and took it to my bank along with the scammers text messages and they filed a fraud claim I was pleased to see the money was put back into my account I guess the bank swallowed the loss thanks again martymcfly