tABC goes live with SKOUT AIRGUNS to reveal and discuss the first production version of the long awaited EPOCH. This is a chance to hear about and ask questions the design, directly from its engineer designers at Skout and Jerry and I.

The LIVE segment will air on Friday, January 6th at 12:30 PM EST on Facebook. Simply join THE AIRGUN BENCHREST CHANNEL there (link provided below) to participate in the live broadcast. For those unable to attend we will post a link to the recorded session here over the weekend.

Playing with my new ATN X-Sight LTV 5-15, this is my first video recorded kill. It's a bit of pain to sight in, but once done, results are great. The recording made me realize my date was set incorrectly.

Range was about 40 yards
Stock Marauder 22 L&W
JSB Heavy Diablo 18.13


My retriever got in there too quickly.

What kind of distance do you like to aim for with a .22cal when it comes to target or small game hunting?

I've been on a quest to make a lower power 25 caliber carbine and was waiting for the kral nish to come out in the wood stock. Really dig a thumbhole stock, but just couldn't justify another 400 bucks on basically the same gun as a mega when I already have a mega.

Ended up getting an np03 tube from Gizmo and an np01 barrel from Ramen at Canada Shooting Supply. Pulled off the 280cc regulated tube and np03 16" barrel and should kit.

Its pretty short, the Troy Hammer air stripper doesnt even clear the barrel band.



I had another NP03 shroud laying around that the threaded rear end had cracked off so I just ground off the threads on the rear mount bushing, tapped a hole thru for a set screw, and drilled a hole in the shroud. Fits 4 Mrod baffles in front of the shroud. Ended up just under 34" end to end.



I'm happy with the size and weight is more centered, but still a porker even with the 4x32 scope on it.

On to performance. I knew it wouldn't be stellar right out the gate. Also, the barrel leade didnt like any JSB pellets and wouldnt strip off the first pellet on a mag and would get weird toward the end of the mag. These mags were from my jumbo so i know theyre good. Got it to load and shoot baracuda and surprisingly Eunjin 43.2s Power was hovering at 24-25 fpe with the spring just shy of coil bind.

JSBs were doing about 660 fps. I was hoping to get 30 fpe, so I bled it down and tore it apart.

Stock ports were in the .150" range so I ran them all up to .180" and smoothed out the edges and polished up the leade since the barrel was out.

Got it all back together and filled to 220bar. Loaded a mag of Kings and they finally cycled smooth. Guess the finish on the rear of the barrel was catching the pellets.

First shot across the chrony registered 708 so I thought damn, not much gain but it's something. Next shot was 723. Not bad... climbed to 735 by end of 1st 10 shots. Peaked at 743, stayed in the 735-740 range for 25 more shots, and was down to 680s by end of fourth mag. So it'll be a 30 shot gun I'm good with that. I'm hovering just under that 30 fpe mark so I'm sure I'll get there.

Next will be accuracy test and better pics.

Nothing too impressive. Just a barrel swap.
Going from 600mm to a 380mm. But MAN WHAT A DIFFERENCE. looks and feels like a completely different gun. I’m so happy with this setup. Still got some good power too. Bullpups eat your heart out!

Sold Pending Funds

I have an RWS Diana 6G for sale. It is in the original styrofoam box with the original brown cardboard sleeve. This pistol has the target grips, as well as two additional apertures for the front sight, a dovetail scope mount (with screws which appears to have never been mounted), and paperwork. The pistol is extremely accurate and seems to very much enjoy a diet of H&N field target trophies.

The seals were replaced about 3 weeks ago when I bought the pistol from a gentleman collector’s estate. The pistol is tip top, the only cosmetic damage I can find is a 1.25 inch long scratch on the right side of the barrel, a few small scuffs on the grips themselves, and a small scuff on the large ring on the rear of the pistol.

I am only selling this pistol because my hand is too big to shoot it comfortably. My hand is 107.5 mm wide and 52.7 mm thick at the thumb. Unfortunately, squeezing my hand into the grip is just too uncomfortable to do for any length of time. Oh well, that give you an opportunity at an extremely nice vintage pistol. If you’ve never shot a Giss pistol they are admittedly a bit odd, but entertaining and extremely accurate none the less.

I am asking $400 shipped.

Any other questions please don’t hesitate to ask.

22 600mm Uragan 2. Should be a fun toy with the AGM Varmint on top.

Read the Rules on Classified transaction. DO NOT POST WANT AD OUTSIDE CLASSIFIED SECTION.

CUSTOM PAINTED (Utah Airguns) FX MAVERICK COMPACT .30 CAL + DONNYFL.
Very good condition. This gun has the Huma Air V2 transfer port, Ergo grip, oversized cocking handle, DonnyFL Tatsu, Sabre Tactical (short, painted to match) arca/pic rail. Used it in these videos.
You can get this lightly used custom gun for around the same price as a plain gun with no extras.
Gun was $1650
ST rail $150
Paint/camo $350
Grip $50
Trans port $40
Cocking knob $60
Tatsu $150
Value $2450
Selling for $1300.

I tried a 0dB moderator on my Brocock Sniper over the weekend and was pretty disappointed. It caused the POI to drop approximately an inch and a half and would not group good at all. The groups were horrible with it on. Without the moderator, the rifle is laser accurate. I don't believe the pellet is clipping any baffles because the impact points are not key holed. What gives? Any one else ever experience these issues? I guess I'm just asking, what causes this degradation in accuracy?

Should have put this in the moderator forum......sorry.

I've been wanting to get this done for a while. I must say that this Black lightening done by Utah Airguns is even more impressive in person. It's definitely a fix for all these Black stocks FX makes. I couldn't decide between this one or the Kryptek Typhoon

This is my latest attempt, I am now out of pistols to convert. Or I should say willing to convert.

At less than 5 pounds scoped, it is absolutely wonderful to carry.

Mike

Strange for a few reasons, #1 the description as “New”, #2 the need to message seller to go over a few things before buying (almost as if full disclosure of details/condition was not given in ad but will be given in private) and #3 the price. But hey, that’s Fleabay for ya!

https://www.ebay.com/itm/3853295142...jkqL%2Ba0gLc4A%3D%3D|ampid:PL_CLK|clp:2332490

How many AirgunNation members or subscribers are there worldwide?

Use code at checkout: 406GNUOV

From the Vevor store: https://www.amazon.com/dp/B09GLL3XGM?th=1

I have decided to sell some of my Quackenbush collection that I have never shot so for your consideration I have.
1. Outlaw pistol 25cal with a 12" barrel in new condition these are kinda rare as Dennis hasn't built any for quite awhile, Asking $650 shipped
2. Outlaw pistol 45cal with 15" barrel in new condition I have some bullets to send with it so you can start shooting.SPF

Is this possible without destroying the Crown?
I was playing with Strelok when I put in the 40gr javelin slugs in to the calculator. Running the 40gr Javelins look like a worthy project but i don't want to destroy everything that makes the Crown a great gun.

Ideas?

Airgun: FX Airguns Impact M3
Scope: Nightforce Optics NX-8
Mounts: Sportsmatch UK Ltd.
Moderator: Impulse Airgun
Barrel tensioner: Bullet Central
Bipod: GRS
Top rail: AirMarksman Backbone
Bottom rail & butt stock: Kraford & Lypt
Magazine: Studmagloader
Grip: ERGOAir
Knife: Rick Hinderer XM-18

I finally put a carbon barrel tensioner on my FX Crown . Using some aluminium tube 14X16mm as a sleeve to adapt the 16X20mm carbon tube over the 14mm OD barrel. It sure increases stiffness and accuracy , that's the good point. But now the gun is not backyard friendly anymore ,...it's pretty loud even in .22 cal.
So would it be possible to put the shroud back around the carbon tube , in a way or another ? I'm back to my drawing board to find a solution , some machining will be needed , but I wonder if somebody else has already undertaken this project ? Unless noise is not a problem for you .

Sales Rules:

• I accept PayPal or Venmo (F&F preferred). Will also do check or USPS MO and ship once cleared.
• CONUS shipping is included in the asking price. Please allow up to 48 hours for shipping.
• I will go based on PM timestamp.
• Please - no trade offers for this sale.

Open to reasonable offers.

3 - Crosman 38T .177

I purchased this vintage Crosman 38T pistol recently due to its excellent condition, but am keeping my collecting focus on older airguns for now. This pistol is 100% functional and holds CO2 with zero leaks. This is one of the models with the plastic rear sight. Comes with the original box which is in very good condition. The pistol itself is near mint for its age with only a few minor bits of wear to the paint. From the samples I've seen while looking the are not many without the paint destroyed on the muzzle and the end of the barrel dinged up. As you can see from the pictures, this one is extremely clean.

Price: $160 $150 SOLD





***** BELOW HERE ARE SOLD *****

1 - Umarex Beretta 92fs in silver with wood grips.

Holds CO2 with no issues. Comes with case and 5 magazines. Selling as I am more into precision pistols than those for plinking.

Price: $150 $140 SHIPPED SOLD

2 - Smith & Wesson 78G .22​

This 78G is in excellent condition with the only mark I can find being on the left side up near the muzzle. Holds CO2 with no issues and shoots very accurately. It comes with the original box, CO2 cartridges, pellets and documentation. As shown in the pictures below serial numbers match on the pistol, box and warranty card. This is a true collectors item.

Price $275 $270 SHIPPED **SOLD**




4 - Beeman P11 .177 Magnum Springer

Same as the Weihrauch HW 45. Love how this pistol shoots. Two power levels based on how far you cock it. Over 500 fps on max with 7-8gr pellets. I purchased this used and have put maybe 100 shots through it. It's still breaking in as far as I can tell as I'm still getting a little smoke out of the barrel with full power shots. Will definitely challenge your shooting skills. Haven't seen these in stock anywhere for a while.

Price: $375 $365 SHIPPED SOLD



5 - Weihrauch HW70A

This springer pistol I purchased new from AoA. Excellent springer pistol still breaking in with under 100 shots. A different shooting experience than the P11 above due to the break barrel design but still very accurate if you do your part. The original box and manual are included; however, the 2x pistol scope is not included. The dovetail rail will accommodate standard scope rings or a nice red dot setup.

Price: $215 SHIPPED SOLD

View attachment 317200View attachment 317201View attachment 317202

Well, my initial Xmas present to myself was going to be a red lam 54 Air King Pro, but that was thwarted when it arrived with a broken stock. Started looking around for other guns I wanted and ended up getting two. This is the first, courtesy of our very own Lewis. Great guy to deal with. Had been thinking about either a TX200 or HW97 and he had this. BNIB and packed with Lewis’ legendary skills. Fortunately had the nice little Boker Kim gave me for Xmas in my pocket. Was too late to clean and fire it but shouldered it and liked the feel. OAL is actually less than my Diana 34 or Winchester 435/Diana 35. Looking forward to putting a scope on it and sending some pellets down range. Hopefully weather cooperates this weekend. Thanks again Lewis.

Edit: Do all the HW97Ks come with a gold trigger? All our other HW have silver triggers.

Don't know if anyone has done this. At some point I want to remelt my pellets that drop out of my duct seal trap. Many pellets have bits of the goop on them. Don't want to throw those in my Lee pot since it will probably make a permanent mess.

Is there any solvent that I could soak the pellets in that would dissolve the duct deal?

Hello Pneumatic Friends!

We have yet another batch of new and used airguns! All FX Impacts are the latest, with power block! New! FX Wildcat Bottle version!

***NO TRADES AT THIS TIME***

FX Impact M3 powerblock

*SNIPER .30 CALIBER (BRONZE-one available) BRAND NEW! $1899 SHIPPED TO LOWER 48
*STANDARD .22 CALIBER (two available) BRAND NEW! 480CC, 600MM $1799 SHIPPED TO LOWER 48







FX Wildcat MKIII Compact BOTTLE

*MKIII Compact Bottle .22 CALIBER (ONE available) BRAND NEW! $1649 SHIPPED TO LOWER 48
*MKIII Compact Bottle .25 CALIBER (ONE available) BRAND NEW! $1649 SHIPPED TO LOWER 48













Thanks everyone for the choosing us when considering your next airgun purchase! We really appreciate your business!

***Free shipping to the Lower 48***. All other shipping locations will be quoted separately if needed. For Sale in the USA only.

Payment type accepted are: USPS money order, Paypal (you must pay 3.5% fee, unless you choose to pay via friends and family). ALSO, NOW ACCEPTING VENMO & CASHAPP. ZELLE ALSO ACCEPTED.

If you have any questions, REQUEST FOR PICS OR MORE INFO, please contact us via email or call:

[email protected].... phone: 971-301-4080 (please leave message/text if no one answers)


If you need tuning services or repair for your airgun please feel free to contact me!

971-301-4080

PRECISIONPNEUMATICPRODUCTS.COM

***SOME OF THE PICTURES ARE GENERIC, HOWEVER WE ALWAYS TRY TO UPLOAD PICS OF THE ACTUAL RIFLES OR PRODUCTS. MOSTLY NEW RIFLES WILL BE GENERIC PHOTOS. YOU CAN ALWAYS REQUEST PICS OF THE ACTUAL PRODUCT LISTED. WE USE GENERIC PICS FOR CONVENIENT POSTING OF ADS.

I detest this social construct whole hardedly!
Is it possible to turn it off on this site?
I have contacted moderators allready.

Every chance i get i try to put people down and belittle them but my score still climbs.
So i'm not the AH here you are!

I dont give a tinkers cuss what you think og me, on the contrary i would wery much be left alone.
Much as "jesus" in: Life of Brian.

And as Graucho Marx said: I would never become a member of a club that actually wanted me to become a member!