Still some small things to tweak but it cycles reliably. Fits up to 12.2 mm long slugs so it handles 40 grainers with some room to spare. The housing is made from 6082-T6, the rotating pellet-holdy thing is made from delrin (which is a dream to machine) and the top cover is made from perspex. The locket is standard FX parts (for now). All cnc-machined, no 3d-printed parts.

I had a person PM and asked about the Primos Trigger Stick Tripods we are using while we hunt so I thought I’d post my reply here so it may be helpful to others.

Primos Trigger Stick Tripods are AWESOME! They are about $100 and the best $100 I’ve spent for hunting. I couldn’t imagine hunting without it. My hunting buddy and I have both used them for about the last 5 years. Mine fell over last week and the top yoke broke off which is the first problem either of us have had with them. I ordered a new yoke for $15 and should be here tomorrow.

I started with a mono stick then went two legs and both are a joke. Very unstable. The tri-pod is the way to go. It adjusts to about any useable height and uneven terrain by squeezing the trigger until it’s where you want it then release the trigger and it locks the legs. I’m 5-10 and shoot off the standard yoke included with the stick. My buddy is well over 6’ so I made him a 6” extension to put on top of his. We shoot mostly high elevated shots at birds and he was constantly stooping and has bad knees so the extension was helpful for him.

While walking, we carry our sticks in our left hands like a walking stick and our rifles hang from our right side on a single point harness. It’s very easy and quick to deploy the trigger stick with our left hand and grab our rifles with our right hand.

Theres no comparison to the stability advantage of three legs on a tripod compared to a bipod or monopod. It’s as easy as shooting off a solid post, fence, bench or large tree rest. I would encourage anyone to give one a try if you are into hunting and stalking in the field. Here’s a picture of my hunting buddy shooting off his. Notice two legs are positioned off of the higher and uneven cattle feed and the third leg is on concrete, yet it’s still a stable platform to shoot off of.

Just got this in the afternoon delivery. this is the first one I have had a chance to buy and I jumped on it. Holds air and works perfectly.

Crosman model 451

Looking to get into HFT shoots. I am thinking about purchasing a Daystate Wolverine R. .177. Would appreciate thoughts on using this gun for that purpose. Thanks in advance

Tried selling this gun a while back no luck. Upgraded it to a .25 tensioned barrel but still have the two .177 stx and the small compact bottle. Comes with all listed. Pictured with .177 stx. Interested in trading. Looking for RTI, Brocock, Edgun, etc.

Let’s see what you have.

Does anyone know if the HW 97 Millennium has a 25 or 26mm piston?

I won this compressor at EBR 2022, but I just received it last week (I waited for the brand new units). I filled it with oil, tested it once, and now it can be yours!

I did a quick comparison video HERE, and I decided to keep my 220v MCH-6.

I'd prefer local pickup instead of shipping. If this unit doesn't sell by the ends of March, I may consider shipping it. I live about 30 minutes South of Austin, TX.



Now is your chance to get a stellar compressor at an unheard of price!

Retails for $2500+
Yours for $1500 cash

DM me if interested.

-Michael

Have not had a chance to try this setup due to rainy weekends, but honestly it's better if I ask before I screw something up.

Anyone know if a PCP's recoil could cause the barrel & shroud to come into violent contact? Obviously I would not try this with a springer

Sold 3/7/2023


Deal of the day for certain.

I have a brand new never filled Air Venturi Carbon Fiber 4500 psi SCBA Wingman 74 cu ft. Bought in February from Pyramyd Air. Have original box and foam packaging.
9-2020 DOM (date of manufacture) and tanks are good for 15 years. Comes with the Foster fitting hose as shown. Everything is as received from Pyramyd Air.

$275 for the tank locally in and around the Portland Oregon area. I could ship but my search shows it is quite expensive. We could discuss.
PP FF or we can discuss other options.

These just arrived yesterday from the UK. Made by Precision Ballistics, the Hollow Point Zambezi come in at 14.2gr. In my brief testing, they are the real deal! Five at around 30 yards out of the 24fpe Regal.

Came across this while cleaning house. It's an old FX Cyclone stock. It's used and has signs of use (see pics).
$140 $120 shipped conus. PP preferred, or add 3.5%

Additionally, I have an FX hard case that I would add into the deal for an additional $60. (see thumbnail pic). I WILL NOT SELL THE CASE SEPARATELY UNLESS you are willing to pay shipping costs.

I have an Excellent Condition AEA Challenger Pro .35 for sale or trade. It has had a professional trigger job performed and also a power tune. It is doing 175 fpe with pellets and over 180 fpe with 110g slugs and it really likes F/X hybrids. I will trade for a bullpup or will do partial trades as well. The rifle will come with the moderator some pellets and some hybrid slugs for $800 shipped or with the scope and 1000 fx hybrids for $1050 shipped.

Just had to verify myself. Thank you for making it a lot less painless! I mostly use my cellphone. Before I would have to leave the page, then go into my email to get the code. When I go back to the page it refreshes and the code would not work. I had to use 2 phones, one to stay on the page and the other to get my into my email to retrieve the code. Now it is so much more simpler. Thank you AGN!

FX Pocket Chronograph with accessories!
$165 Shipped conus. PP F&F preferred, or add 3.5%

I got this when they first came out. Used it for a bit and haven't fired it up in a long time. I always took the batteries out when storing it so, the battery terminals are clean and free of any battery acid.

I bought a few hand tight scba thread adapters from air tanks plus. Going to make a handful of fill adapters.

The air tanks plus adapter has a flow restrictor in the end of the pipe. I was thinking of removing this.
Wondering why it’s there and should I keep it there. Looks to be a brass insert pressed into the anodized aluminum nipple.
I could probably knock it out or even drill it larger.

Thoughts?
Here are some pictures.

PRS ARCA/Pic rail and Bag rider.
$120 $100 Shipped conus. PP f&f preferred, or add 3.5%
I used the picatinny rail a few times so, it has very minor wear. Other than that, everything looks brand new!

I am selling 2 aluminum scope side focus wheels.

The two that look identical have; outer diameter of 5 inches and a mounting inside diameter of 1.575 inches.
The large wheel on the right is no longer available.
The crescent shaped has; outer diameter of 4.53 inches max and a mounting inside diameter of 1.575 inches.

Selling each for $80.00 shipped or $150.00 shipped for both wheels.

I have gotten my hands on a 1200 as well as a 1350 that I am going to be playing with.

I will be using my American Air Arms Paradigm with a Donny adapter. Will use on a few different rifles to see if there is any difference between rifles. Plan on getting some video from right at the gun, as well as on the target 50 or 100 yards away to hear any differences. Waiting on the snow to melt in my area to get some really solid video.

I will be testing the Impulse Air against a Huggett Swirl, a DonnyFl Shogun, the shroud that comes on the Paradigm. I believe I have a stock Fx mod as well that I can test, and will see about getting a few others as well if I can get my hands on them.

But as of right now I can say that the machining and manufacturing process with the Impulse is very impressive. If there is anything you guys are wanting to see let me know and I will do my best to get them incorporated.

I have a brand new TX2 457 valve, and a slightly used CF tank. Does not come with guage or fill nipple. Asking 250 shipped TYD . Any questions or want more pictures please let me know. Thanks for looking. Open to offers

ring lot with benjamin baffles and metal baffles from a jts airacuda ever thing in pict 22$ shiped

I recently swapped my classic 22 cal to a 177 dream pup.

500 mm barrel with the older single hole transfer port, but comes with the newer pellet/slug transfer port, pellet probe & barrel band.
$220 shipped

Classic synthetic stock with mounting bolts &triger mechanism $175 shipped

I want to rebarrel my Kral Bighorn 25 caliber with a 28 inch .250 groove diameters barrel.

The problem is TJ lists that barrel with at 7/16 diameter and my Bighorns’ barrel is .591 /15mm diameter, but more importantly the barrel stub is .501 inch.

I have reached out to TJ via Emil to see if they make it in either 1/2 inch or 9/16.
Has anyone had a 9/16 TJ 25 auto barrel made?

Regards,

Roachcreek

Air Gun Technologies Vulcan in Excellent condition. Holds air and shoots great. Comes with 3 mag's, fill probe and soft case. $625 + Plus shipping thru PayPal goods and services.

Went out this morning. Cold. Windy. what's new....
Got setup, started slinging lead
My coffee finally started waking me up about an hour in.
The wind is gusty as can be
I cant even hit the dang paper!
.... and I realize...I'd been turning my turrets the opposite of where there needed
Yay for dyslexia
Got them back to where about they "should be"....
I hear a vehicle...
No biggie...
I wait for them to pass(public shooting area)
..

...
Dude parks downrange of me
...
Gets out, picks up a rock and moves it out of the way for him to continue the path...
that rock is an indicator that the sand starts there.
He gets back in his truck.
He sits there....
For an hour...
Said screw it and packed up.
Was getting in to leave....
He starts to drive off INTO the direction of the sand....
I wait...

He makes it 30 yards and I see his truck slump in
Followed by multiple engine revs....
Definitely time to leave now
In the rearview I see him digging at the sand...
Sorry bud....shouldn't have interrupted me having a good time
My manners indicate that I won't bother interrupting you, because you seem to be having such a good time.

*those.gamo pellets are tttrrraaassshhhh.....but I got them to hit

March compact 2.5-25x42 with MTR-5 reticle. It’s in excellent condition. Includes everything shown along with a sunshade.Scope was purchased new in January 2023
Not interested in any trades
$1400 includes shipping to Conus,PayPal F&F excepted or add 3.5%
I purchased two March scopes and decided to sell this higher magnification scope and keep the 15x scope.
Steve