Let me preface this by saying the spring is NOT adjustable outside of cutting or adding spacers and the regulator is NOT externally adjustable and thus I have to completely degas whether going up or down pressure wise. Incremental adjustments of both just isn't in the cards.

So the question is, what IS the relationship between the hammer spring and regulator? For example, if hammer is too light for regulator pressure, what would expect the fps to be start/middle/end of shot string. If the hammer is too heavy for the reg pressure, what would expect the fps to be start/middle/end of shot string. Ideally you'd want to get consistent shots across till it drops off the reg. As it is, my fps are still on a bell curve, not drastic, but bell curve nonetheless. I'm trying to flatten that bell curve as best I can. I'm about 4 months into PCP and this is all still very new to me.

Used Anschutz 2025 HP .177 this was my personal WFTF rig, this rifle shoots like you'd expect from a anschutz
accurate, adjustable, match grade trigger etc. since it was the HP version I had to turn it down to sub 12fpe for WFTF right now its set for 11fpe
and last I chronographed it I went 150 shots on the reg and then stopped as that was more that I would ever need at a match.
But the rig could easily be adjusted back up to open class power levels.
I also installed a quick fill adapter so it can be filled with a BSA fill probe but also include the original thread on fill adapter.
The full length optics rail is included I found its really helped stiffen the breech and prevent zero shifts.
Asking $850 obo Shipped CONUS, Paypal preferred.
Would consider trades +- cash either way looking to get into a nrl setup so optic or high end slug gun.




The gun definitely shows its age and use cosmetically previous owner repaired a crack at the grip and then there are just quite a few little scuffs or imperfections in the finish.
I considered refinishing the stock when I got it but it didn't affect function and was my travel rig, along that line you will also see there a screw missing on the adjustable cheek rest again it came to me that way and once it was setup it didn't affect function.

Just received BRK Ghost HP .25 from Atlas Airguns. Purchased it on Thursday early morning and got it today Saturday in 3 days. Absolutely awesome rifle pushing 70+ fpe easy and I didn’t have to do anything, unlike my Impact MK 3. Straight out of the box, it’s accurate and powerful. Customer service at Atlas with Tristin was fast and reliable. Awesome dealer. I’ve purchased and own 12 high end PCP rifles from various dealers and Tristin is on the top notch for sure. Utah Airguns and Ben at The Pellet Shop, you guys are awesome as well.

As it waits for the Huma gen 3 AMP replacement.. I took it down again and thought about looking at the valve seat. This rifle is the Gen 3 with a different method for removing the valve seat I guess. Watched a video and this was mentioned (at least that it was almost impossible to remove.)

I took a look in there with my bore scope, but that didn't tell me much. I'm not going to try if one of the most experienced FX smiths out there says it's almost impossible. Unless someone has done it and not damaged anything.
Does someone have experience working on the GEN 3 Dreamline valve seat in here? I'm sure they get replaced as they are a consumable in a sense.

I'm thinking prod is sweet...but it's only .22.
I know I can convert one but nah
Is there a .177 setup that you would closely compare to the performance/price range of a prod?
Just looking around for ideas on some stuff
Let me know

With an extremely low regulator pressure of 45ish BAR and a weaker-than-stock hammer spring, my Ghost is shooting the Crosman Hollowpoints at an average velocity of 670 FPS, or 14.3 FPE (14.3 grains @ 14.3 FPE), which is accurate and more than sufficient power for me for backyard practice shooting.

It has to do it all for you. Bench Rest, FT, hunting, plinking, pesting, etc...

1) Gun
2)caliber
3)power

I have a dragon claw 50 dual tank and a gauntlet 2 25 that I’m looking to trade. Let me know if you’re interested

Just received my EVOL 30 (first pcp ever!) something light for beginners… LOL ! Now I’m having a hard time deciding between an optic. What do you ladies and gentlemen think between these three. Aztec Emerald ffp, Athalon Midas hd, or one of the lower ends Leupolds. Let me know your thoughts!

Impulse buy from AoA, ugliest HW97K springer I have ever put my hands on. Yeah, hurts to look at so sharing the pain. You get what you get sometimes.

Just received this dandy little package and it is surely sweet. The Atomic XR is at this point a proven platform. It lineage is undeniable, quality PCPs that simply perform. The Athlon Scope, Sport Match rings, 0dB moderator and gun case make it all the sweeter. The case is spacious enough to hold the two guns, pump, pellets, binos, rangefinder, etc. So when I’m ready for a pesting session it’s all there, ready to go. It’s no secret here on AGN that I love using this little beastie. Not a guru, authority or anything of the sort. Just an enthusiastic shooter who is a plinking fool.

My intent for this second one is to play around with different pellets and optics. Allow some of the kids in my clubs’ Junior Sportsmen’s program to use it. Single loading to keep it simple. Going to expose them this Spring, hoping to open the eyes of some fellow club members. Last year did not pan out in that regard. The program took a direction I had issues with, which have been somewhat resolved. The first Atomic XR stay strictly my pester/plinked, don’t want to mess with it. That said the new Atomic XR is performing to my expectations, “right out the box” scope came mounted. Within a few clicks I was on at 25 yards. Then a few black walnut husks at 50 yards… As received the trigger pull was so heavy. I thought the safety was on, quickly remedied and all is good. She’s already dialed for what I do. She is already demanding to be blooded, so off after starlings I go.

I have a new Vortek HW style. 26mm piston seal.
The outside diameter of the seal 1.035”
And the inside diameter of my cylinder is 1.006” (to the best of my ability to measure)
My question is what dimension do I turn down the seal to , to fit this cylinder?
Thanks.

Used Walnut stock Scorpion SE in .22 caliber 12fpe edition, make for a ton of shots per fill and an awesome plinker or pester.
over 85 shots per fill. has a couple marks on the stock but otherwise is great condition and a beautiful walnut stock.
Rifle and one .22 gamo mag for $335 shipped CONUS. No fill probe included. Paypal preferred
PM me with any questions, Thanks.

Like new Fx wildcat compact .25
No issues , loved the jsb monster redesigned 34 grain!
Comes with
1- magazine…
Thread protector
Fx hard case
And the wikdcat mk3
No bipod,
No miderator
No scope..
Asking 900 shipped lower 48 states
PayPal ff

Selling off one of my Taipans. Awesome gun! I bought a couple from Utah airguns. One I was going to convert to a powerful .177 slug shooter but lost intrest. Mods as follows:

* update: it seems since the new vet is coming not much intrest in the old ones so I lowered the price quite a bit!

.25 green laminate long
Donnyfl koi
Donnyfl adapter
Donnyfl speed dialer
TT heavy hammer spring
TT plenum
Huma reg ( 150 bar)
Element Titan MOA 34mm
Element rings
Hard case

Shoots like a Taipan should. I’ll throw in a few tins of jsb 34gr mk2. Shooting 960-970 but you can dial it in very easy at will. Well over 3k invested selling for 1600$ shipped and no less please no rediculous offers. No trades at this time.

You can ONLY choose one.

Mine is my FX Boss FT .30 cal.

A recent thread about a Falcon FN12 has got me wondering where all the "first generation" pcp's are because I hardly ever see them come up for sale. By classic first generations I'm talking about the Titans, Falcons, AA300, BSA (Superten), Daystate (Harrier, Huntsman etc) and more.

Looking into getting better glass at some point and wandering who has experience with both brands and which one would be a better choice?

Theyre close in price range for some of the higher end hawke vs element titan.

Where are the element scopes made? I know hawke is Chinese and if I'm spending the coin, I'd like to avoid more Chinese stuff on my rigs.

Thanks!

I have yet to own a HW35E. Wanting to get the wife into springers. She is 5'2 and petite. Both of us are not young pups any more (50's or just shy of). Would the HW35E in .177 be a good pick for her?

Like the title says when you are shooting offhand, what's your favorite magnification and up to what distance you consider yourself reasonably accurate?

I have been shooting airguns as long as I could remember. I started with a simple gamo springer in .177, then a crosman in .22. I never graduated away from springers until I was moved out and living on my own. I bought a Beeman commander in .22 about a year ago. Im now looking to upgrade to some thing much nicer. I've been looking around a lot and have checked all the classifieds here. I think I want to go with some sort of FX, that way I can hopefully just get one and be happy. (Unlikely I know) Is there anything that's as modular or as tunable as FX in the same price range? Any recommendations for something sub $1300.

With IWA going on right now... thoughts are When are Steyr, Anschutz, Hammerli, and FWB going to realize that there is a market outside the sub 12 market where serious shooters want serious air rifles in the USA? we have FX, and Daystate, and I hesitate to say RAW because of the recent (last few years) changes there to name a few good ones, but as for the Top 4 in quality fit finish and function... we got nothing.

What do you see?

$90.00 + $5.00 Shipping CONUS ONLY, PAYPAL ONLY, I will invoice you via PayPal.

I’m located in north central wv near Clarksburg. Free to a good home is a used yong heng compressor and gold filter. It builds pressure until about 3k then no further. Not shipping. Hate to trash it, so if you’re close come grab it! I’ll even throw in the extra oil and filters I have for it!

thanks!