I’d be interested in hearing about your success stories and failures. I have a set of Beeman fully adjustable rings with the pins that I think will work for one. They have an oddball dovetail size and don’t know where to source a set of rings for the other. Maybe a Fastfire would be a better idea. I don’t know. I have a couple Leupold 2x pistol scopes here that I’m not using so that would be the least expensive option.

I am looking to sell my backup competition rifle , a walnut FX streamline .25 caliber. It is huma regulated, and heavily modded to get high power. This gun has been upgraded by Chuck and myself and will shoot sub moa with JSB 34 grain pellets. This gun has been harmonically tuned as well as tune to shoot the 34 grain pellets at around 900 FPS. This gun also allows for higher power to be shot as well. We did get this gun up to 82-84 foot pounds with the same pellets, but we lowered the power back down for best accuracy at 100 yards. Chuck upgraded this gun to except 300 bar fills, but I personally only go to about 280 bar. I can send pics if anyone’s interested. I just have to go snap some photos as this gun is sitting in my storage unit.

I am asking $600 plus shipping for a perfectly tuned rifle. No optics are included.

Thought I would shoot a N50 card tonight I can live with it, some pretty gusty winds but nothing terrible “my lack of reading them is the problem” actually I can live with it.
.30 cal. King tuned way down 44gr. Believe I scored correctly? Center dot completely covered for X

I bought it used from a member here, it needed some work. This one is not a show piece it's a shooter, has a couple of marks on the barrel and a couple of marks on the stock, but it looks fine to me as a shooter or hunting rifle.

I stripped it clean, honed the tube out and made a custom guide and top hat for the factory spring, which has 4 coils removed. Spring ends were closed and polished. It shoots around 11+ ft lbs with a 8.44 badacuda 8 doing 761fps sd 1.8 es 6.2, or with QYS 8.48 doing 769fps sd 3.0 es 9.1.

The trigger has been polished, the adjustment screw was cut down so it doesn't show. I made steel posts for the front stock screws to try and center up the action in the stock, not perfect but much better than it was. The whole thing is lubed with Krytox, except the trigger which I used remoil.
Everything was deburred and polished, the piston was buttoned at the rear and has the factory piston seal. The barrel was re-crowned.





Here is some 20 yard groups with the gun resting on my hand, and my hand on top of the front bag. The lower right target with vertical stringing was shot off the bags, which it didn't like.

$375 shipped with UPS and tracking. I'll take check, money order or cash. Gun will ship with tracking info once I have the money or cleared check. Lower 48 only, and where allowed to ship.
If you need more pics or questions DM me. Thanks.

Why,because now I use my air compressor......it had been sitting unused for 3 years because I used a handpump, why, because it was like a workout. What happened is I a bought 4 new PCPs around the beginning of the year, and they all had larger and higher pressure bottles=too much handpumping for me ......so now just fill and shoot.

Hello everyone.

I have shot .25 cal high power airguns for a few years now but now i am deciding to get a .30 cal FX IMPACT M4 in 700mm with a superior liner, my intention is to get it set up to shoot slugs at pests birds, rabbits and foxes, what does everyone find works well in there .30cal impacts? Obviously i may need to get a 700mm slug liner, any answers would be appreciated.

I am new to this forum, just signed up hours ago. And new to the adult version of air rifles .

I joined the forum to learn and get opinions from those who are in the know.

I would like to find a rifle to use for varmint hunting and plinking. To provide a little more context, for many decades I have hunted with and shot regular firearms, compound bows, Black Powder, and Crossbows.

After over a week of researching, it seems like I find a rifle that interest me, and I as I look for best pricing and availability I find it’s been discontinued.

I understand that break barrels aren’t nearly as accurate as under levers. And that PCPs are the most accurate and have less recoil but, I prefer to stay away from the inconveniences of charging the gun. I like the thought of grab and go.

I narrowed my criteria to, underlevel, under $600 and has some kind of recoil management system. As I mentioned, I found several that meet my criteria but they have been discontinued or they are not in-stock. The only 2 I am aware of that are still manufactured are the Umarex Synergis and Norica Dream Hunter. The reviews of the Synergis leads me to believe it’s not accurate enough for me. And I’m not familiar with the Norica brand but, the reviews are favorable.

My questions to those on here with experience, are there models I have missed that are still available and meet my criteria? Is the Dream Hunter worth buying?

Or should I open my narrowed criteria to allow PCPs or Breakbarrels?

TIA,
Mitch

I'm looking for a GX-CS4I. Aliexpress is at least $100 cheaper than anybody else. Anybody buy anything from them?

What slugs- brand, caliber, weight, gun are giving you good and consistent accuracy? At what distance(s) do you usually shoot them? By accuracy, I think I probably really mean precision- as in least amount of fliers and tight groups(moa or smaller)? How many shots per group are you shooting?

Hi All,

This is a factory new FX Boss .30 in synthetic stock.

Was purchased a couple weeks ago from FX and is in new condition.

It has the full FX 3 year factory warranty and ships with one magazine in FX hard case. It does have a Huma reg installed (original FX reg is included) as well as DonnyFL adapter for a moderator. This is the fixed shroud model and of course has the original smooth twist .30 barrel.

Was purchased as a lighter replacement for a .30 RAW benchrest gun by my Dad but at his age it is just too much gun for him.

1250.00 shipped, PayPal for pmt. Again, this is a new FX purchased Boss, I am the original owner and has the full 3 year FX factory warranty (2 years 11 months 14 days left to be exact).

Scope, rings, bipod, bottle adapter and moderator not included.

In like new condition and was used for developing custom parts. Very accurate and the build quality is great and similar to the P35/Bullshark. This kit includes (I have rails and holders made in black if you want to swap out. The blue ones shows up better in photos.) bipod tri-rail, side mounted magazine holder and 6 magazines. 2 are OEM and the 4 are custom 12 shot mags. Bipod not included. Scope not included in price but can be added. The scope is a Vortex Strike Eagle 4-24x50 EBR-4 MRAD ILLUMINATED Reticle Riflescope SFP and the mount is a UTG accushot mount. Price without scope is $325 shipped to the lower 48. Add $300 for scope and rings/mount. Cashapp and M/O accepted. DM offers accepted. If you want the tri mount and mag holder in black, let me know.

​

Like new asking $750 shipped for fast sale..
PayPal f&f

Thanks for the help

Thought I never do this, but life and health dictate that I do. Selling my three ace precision rifles, 9mm, 25 and 22.
The 357 is a 20 shot gun as well as the 25 and 22. 180-200 ft lb for the 357, 25 is a 90-100 ft lb and the 22 I only shot once , I believe it hi 74 ft lbs.
$850 each plush shipping in the conus. 357 on top, .25 middle, 22 on the bottom. Does not come with scopes but the ldc on the 357 and .25 are factory so they will come with those. .25 and 22 have 6 shot mags like the sumatras, the 357 a rotor like Evanix . Not safe queens, light handling marks and small mark on the barrel of the 357. 10 of the 357 were imported, I don’t know of anyone else that has a .25 and I think 5 of the 22. Zelle or cash app (edit) ships from 36305 area code Alabama or can meet up if fairly close.

I quality springer,which there are many can outshoot a pcp that costs about the same.
Yes ,I tested my theory yesterday,ok it is a generalization,never-the-less for me it holds true.
A $400-500 springer is more accurate that a $400-500 pcp...
I think why too many guys go with the pcp is because of the hype,or they may have a hard time cocking a springer,I see no other reasons.
A $500 pcp is just the start of the spending frenzy also. But Jesse a pcp is easier to shoot,you don't need as much skill; hold on Buster your going to get in trouble saying that

There are two types of people in this world. Those who have a GK1 and fulfillment in life and those who have neither…. Coincidence? I think not.

Come into the store or head online so we can help set you on the right path

www.airstryktx.com

As a kid, I had a Crosman 761XL, and it was "da bomb." Stolen from our house in a burglary. I wish I could replace it for nostalgic purposes. I've looked, but the vast majority of vintage 761XL (with gold receiver) are in very poor condition.

Since then, I've been a big "gun" guy with a pretty decent collection of firearms. I like me some guns!

I've been wanting to add a "real grown up" air rifle to the collection for a while. And I finally placed the order yesterday (Pyramyd Air)!

I ordered a Benjamin Marauder Regulated (aka "Field & Target") in .22. Wood stock. Lothar Walther barrel.



Also ordered:

Hawke 4-16x44 Airmax 30 SF Compact Rifle scope, Ill. AMX IR, 1/10 MRAD, 30mm​

Air Venturi Mini Wingman, 100 cu in PCP tank

Also an assortment of pellets to try and four extra magazines.

That ***t adds up to some serious $$$! But I can't wait to play with it!

A year ago, a dude at the range had an FX Impact M3 that attracted my attention. He let me shoot it. At 25 yards, I put 5 pellets in one hole. Not a "cloverleaf." ONE hole! Oh, baby... I gotta have one of those! Well... that rifle (alone) is $2100. Sooooooooooooo.... I'm starting with the Maruader!

I hate it.

Started by ordering an action and the saber tactical chassis. The SB chassis would not fit, it bound the trigger when installed. UA installed it that way, shipped it to me with the safety stuck on fire, and the trigger not even moving at all. The only compensation for that fiasco was free return shipping. Woohoo.

SO called UA and swapped it for the delta force chassis. OMG this thing is heavier than philosophy class. I could not, for my use case of shooting out back and an occasional field jaunt, lug that thing around.

So I found that FORM from the UK made some beautiful walnut stocks with cheek and LoP adjustments...ordered one of those. Finally get the trigger guard with it, and go to put it all together, and find out that it doesn't fit. Apparently the DRS PRO and the DRS CLASSIC have different trigger groups, and they are not compatible across stocks. The PRO is intended ONLY for chassis style - despite only fitting 2 of the 3 chassis available.

So back to UA, and ordered a standard trigger group, which they claim FX says you can swap, but they never have. I probably should have looked at videos of removing the trigger assembly before ordering that, because now there is no way I am excited about taking all those tiny pieces apart lol.

So, now, 6 month in on ownership, and I still have a gun I cannot shoot. I am ready to stop throwing good money after bad - I just wanted a slug ready FX gun, it just looks like this adventure is down a rabbit hole full of poo.

Anyone want a DRS pro action with no stock? Walnut FORM stock anyone? I'm sure no one does, just really frustrated and needed to vent.

The only PCP that I recall that has/had a safety burst disk was my Kral Mega Marine. That is a feature that I value highly, but it seems that only a few guns have what seems an obvious safety feature.

Many Kral have them, and a search shows that some: Trimex (never heard of that make), Niksan (never heard of), Reximex, Air Venturi, Pallas (never heard), Kuzey (never heard).

* the "never heard of" comment isn't a shot at these makes, simply illustrating that I haven't even known to consider these for purchase.

For sale-Huben GK1 V3 .25, like new, used twice!

I really like this gun, I just don’t love it, I’m just not a pistol guy. It’s decent as a carbine for me but still doesn’t make me want to shoot it much. Gun has about 100-150 rounds through it, semi auto works like a champ, no issues whatsoever.

Comes with everything you see, .25 V3, two probes, parts and tools, Ares loading gate, fill plug, gauge cover, Bravo3D tactical grip and forestock, original grip, picatinny adapter for mounting scope, 1.2-6x24 scope, cv life red/green dot sight and custom case to hold everything including your pellets.

NOTE: Moderator, tripod and pellets shown in pictures are NOT included!

$1300 shipped conus. No trades. PayPal for payment, NO F&F, I WILL PAY FEES!!

Seeing what the AN forum members with the Katran Compact .22 are using for moderators. Will be running 14 to 15 grain pellets in general. I did contact UA to see what they recommend as Katran sellers. Majority of the shooting takes place around 30 yards or less. What are you running for a moderator?

Does anyone know how this degasses? unscrew the tank? and also can the barrel be indexed? (loosened, spun 45 degrees in place, retightened).

Been workin wit the Leshiy 2 trying different slugs, barrels, jets, etc. and FINALLY found the slug/tune she loves.

Nickle size group at 50 yards. 600mm AP Barrel. 1.2mm and 1.3mm jets...20.2 grain NSA slugs.

Looking for Wildcat mk3