For sale is my most beautiful rifle. It is a Air Arms S200 (.177) rifle professionally painted in a polished gloss black finish. The rifle is incredibly accurate as expected and the trigger is wonderful as well. The stock and rifle is in fantastic shape, I don't see any marks on the rifle or the stock other than a slight scratch on the bottom where the stock screw is located. It is a single feed. It has a Mac1 moderator that will need to be heated on to the rifle if you want it to be deadly quiet. It will come with the BSA TMD 6x24x44 scope and sunshade. It also has that hard-to-find stock removal tool. It comes with a set of O-rings, and the fill port. It is perfect for the Suburban back yard shooter.

I have years of great buy/sell reps here and on the GTA. buy with confidence. I’ll take Paypal, Venmo, a cleared check, or a USPO money order. You pay any fees.


Priced for a quick sale: $600.00 shipped

Well rebuilding M3 amp regs for a friend and swapping out to the power block was able to pop out the derlin and turned down some peek and put it in the end using a small hammer still have to finish it with 1500 grit wet dry yet

Hey guys. I finally made it to my first airgun event. I was not dissapointed. Tons of fun! Here is a recap of my first day. Thanks for watching! -Nate


Note: This is actually Day 2 (Fri). Day 1 (Thurs) was Gunslinger and Day 3 (Sat) is 100 yd Bench and Day 3-4 (Sat/Sun) is Field Target

Found out today about a property, not really very large, maybe 2 acres infested, with ground squirrels. Lots of stuff to hide behind and if my math is right, my Sapsan with the red-dot would be perfect, 35 yards max shots. Will need to be VERY CAREFUL, houses all around the property. Can hardly wait for this one.

I don't know how long they have been making this exact model, but this is exactly what I am looking for in an air rifle for a bench gun.

https://pte-rifles.nl/Specificatie-s-PTE-220-300/ (Hint: Use Google Translate to convert to english.)

NO Barrel Liners
NO Barrel Shrouds
NO Set-screws to hold the barrel in place in the action
Premium - I dare say among the best barrels in the entire world - Stainless Steel Cut Rifling Krieger! Threaded to the action!

The only thing I read that made me wonder was this but below - But for a benchrest gun, a regulated bottle would be the way to go anyway, I would think.

For the time being, the weapons are not regulated. Most sport shooters shoot straight from the bottle with an external regulator. There are plans to design and build a regulator, but realizing that will take a lot of time and research. This option can also be built into existing PTE rifles at a later stage.

AEA Challenger Pro in .22 in great condition with no marks or scrapes. Bought on here several months ago. Includes Barrel Band & DonnyFL 1/2 Adapter and 8 Mags, I have 5 more just forgot to get them out for the photo. Zero problems and shoots very good groups.

475.00* Gun and DonnyFL Adapter
650.00* If you want to add the UTG Bipod and Airforce scope and rings.
*PayPal F&F or you pay the fee. Venmo, or money order (must be received before shipping the gun).

Open to trades. Any questions or need more pics just ask.

For your perusal -

Just getting into RC cars, I found this section of various silicone lubes of different viscosity's. Used for tuning shocks . From easily pourable to a lot higher viscosity.
NOTE - I bought some 70w. it's still pourable.
And yes, it's pure silicone. as advertised.

Then there is the "dif. grease". I'm guessing it's similar to most silicone grease viscosity (?) . Pretty thick, not really pourable.
Then, I posted the address to the whole section again, because they have a LOT of silicone, o-rings. But, only some of the venders list the size (by dimension and or by size number ), some don't ! Use at your own risk.


So, if you have a problem finding silicone lube...here ya go.

Mike

Its on ebay has 2 barrels 22 -25. thanks Willy

Hello fellow Airgunners. I live in Oklahoma Leflore county. If anybody is out this way look me up I have all the stuff to plink all day. Looking for like minded people out my way that are not ignorant to what is going on in our faces.

Received a new liner today. After I got done doing what I had to do I decided to clean it before the install. Couldn’t push my chord through it so I had to use a rod. Look what was inside. Anyone else experience this?

I really like the FX sideshot magazine and Darko's mags too.
Always willing to learn, I'd like to hear your experience with the Orion magazines in an FX Crown 22
Here is a link
\https://orioniguanahunter.com/colle...cat-mkiii-dreamline-v2?variant=44288697958587
Thanks
Edward


PS
I have watched the @Firewalker' report and watched the video he posted

Good buddy who is thinning his herd of shooting gear gave me a couple sets .... When placing the 1.25" 30mm set onto my vintage .25 WAR Flex it became obvious just how special these ring sets are. Being the inserts Float within the top/bottom ( Main ring & cap ) and the kit comes with 4 various MOA off set inserts allowing PLUS or MINUS 10 to 40 MOA angle correction.
It can be in vertical plane ( Elevation ), Horizontal plane ( Windage ) or any combo in an orbital correction pending insert and where & how placed . Genius !!!

For whatever reason the WAR always shot LEFT on a centered scope & some scopes internally went near adjustment limits in correction.
So with these BURRIS XTR's we place the "0" insert in front position and a +20 moa in the rear having ocular being raised from level. Then put a slight CW rotation on rear insert which moves the scopes Objective to the left slightly, Ocular right. Tighten it down reticle level to bore and go and sight back in ... The windage correction while not perfect was very close so left it alone & turret adjusting it in. With 20 moa of elevation of course it was shooting WAY high which was adjusted to the lower 3rd of range on turret. Now we have more vertical we can dial in for long distance work ... winner winner !!

Again the inserts float until Caps are snugged up locking it all down. Really really slick ring sets !!!

It has a built in compressor ?say it gets 60 shots per charge.I think its 18v.

Selling my evol .30
Rifle is a tack driver. Scope and bipod not included.
$2000
I’ll post more pics this weekend.

Price drop $1700
Final drop in price $1600

It's too darn hot to sit in the woods lately.
I put up the 'gone fishing' sign.
It's not much better but sometimes there's a breeze and sometimes a bite brings dinner.
How are you guys beating the heat besides sitting in AC?

Hawke Sidewinder 6-24x56 SF scope. Comes in its original box with all accessories and manuals etc. It does include a large side wheel and lens covers as well as a sunshade. Scope is in Excellent shape and spent most of its life in the box. Open to trading for an ATN Night Scope. Any questions or need more pics just ask.

350.00 shipped. PayPal F&F or you pay the fee. Venmo, or money order (must be received before shipping the scope).

Looking to trade a DJI Mavic air 2
For a Artemis PP750 in .22
PM me for more info.

What is it going to take to sell this beautiful, well built, nearly mint condition accurate, rifle?
Selling Air Arms S410 / .22 cal FAC $500 rifle only / $650 including Bushnell 4-12x40 / Banner SFP scope and rings. Magazine included and Faster Brand QD coupler (1/8" MBSPP) to fit the fill valve nipple. Plus shipping. Thank you

I need to downsize, so this package is a ridiculous deal for someone! I have for sale a RTI Prophet 2 Performance. It will come with three barrels, a .177 (currently installed). .22 RPB ($400) and a .22 Long Range barrel ($600) - barrel tool also. Includes .22 probe, extra valve and extra regulator, 0db moderator ($100), Kraford and Lypt bench pad and bag rider ($200), four .22 magazines, one .177 magazine, barrel install tool, Huma rail ($130) and soft case. You can add up the total value, but it is a lot. The only marks are on the shroud. Not sure how they got there, but cosmetic only.

I will take $2300 $1800 $1150 for the whole package, shipped to CONUS.

Headbanger has been upgraded with the 910 Airguns titanium valve seat, but otherwise stock. You will get a 22 cal 380mm barrel kit which will include 1 factory FX magazine and the probe. The barrel on the rifle is a 380mm 25 cal barrel and you will get 1 factory magazine and 1 carm magazine. YOU GET BOTH BARRELS

Rifle loves the 22 cal 18 grain pellets at 870-880 FPS and the 25 cal barrel eats up the 25 grain pellets at about the same speed.

Scope, rings, moderator, bipod are not included.

In the pictures you will see 2 different camo stocks, pick which one you want. I like the less flashy stock because it is not as slippery as the "flashy“ stock.

Headbanger hanging out with a few of it's friends out hunting.

The group was shot with the 25 cal barrel at 50 yards ,5 shots .

$1000.00 shipped PayPal F&F Would trade if the right (Non FX) 177 came along.

Tony P.

Good day,

So my impact m3 is leaking air out of the back of the pin probe where the pellet would be inserted. Im assuming it’s the o rings in the power block. Can anyone confirm or deny?

I am looking to mount a scope on my HW35 springer and it is my first springer so I have some questions.
1. Due to the recoil is it necessary to limit the size and weight of the scope I choose? Currently own a Vortex Crossfire 6-18 X 44 on my pcp that I like but I wonder if I should go smaller and lighter on a springer.
2. It looks like the Sportsmatch rings with the retaining pin are the ones I need and I read recommendations for the TO2C and TO4C, the difference being either single or double screw. Do I need to go with double on a springer.
3. I also want a diopter option and I am looking at the Air Venturi Williams diopter and need to know if it will work with the HW35 front sight.
Thanks for any help.

Decent glass. Illuminated. Looks like Primary Arms replaced it with a newer model. Scratch on the right side of the tube. Also has a blemish on the underside, but that was there when it was new. They're not shown, but the bikini scope cover and microfiber cloth are included. Selling because I bought something a bit lighter. Sold as is.

$130 $120 $110 $100 shipped to the CONUS. PayPal only.