I have a .177 vixen tuned by the Man....the Legend.....Derek Wall. This Vixen is freak'n awesome. It can shoot JSB KO under an inch at 50 yards and JSB pellets hole in hole at 50 yards in no wind. Smooth side lever, comfortable to shoot on bench or standing, great trigger, and has the power if you are wanting more power. Asking $1,100 shipped CONUS. Will come with 8 mags and a fill probe. I will accept PO MO from well known AGN members. Scope and rings not included. The only trade I would consider is for a .22 Revere regulated.

JSB KO
Shots 1-10
Hi - 918
Lo - 911
Av - 914 Energy - 25 ft-lbs
ES - 7
SD - 2

JSB 16.2
Shots 1-10
Hi - 881
Lo - 875
Av - 877 Energy - 27.7 ft-lbs
ES - 6
SD - 1

JSB 13.43
Shots 1-10
Hi - 934
Lo - 931
Av - 932 Energy - 26 ft-lbs
ES - 3
SD - 0

Recently bought to try out on my evol mini. It’s smaller than the shroud diameter on the mini, so looks funny. Good sound moderation.

Asking $100 shipped. PayPal F&F or you pay 3%

Thanks for looking.

A long story, but this one was offered to me a year ago and I couldn’t buy it then.
But now it is a closed deal:

As pictured, $325 shipped lower 48, OBO. paypal F&F





Marauder pistol assembled as a carbine in a QB stock. Stock fitment is stable, secure, but unfinished.

The powerplant/tune is basically a .22 version of the 1720T/Rapid 70 I sold a short time ago. The new owner of that gun could provide feedback regarding how the gun shoots. The two performed almost identically, just one in .177, the other in .22. There may be some characteristics that are appealing, while some may not be so appealing. The new owner would be able to provide objective feedback on what I consider as my ideal Prod/1720 tune.....your tastes may vary.

Gen 1 trigger with Airgun Lab shim
Rowan adjustable trigger
<14gr peek hammer
Peek poppet with 2mm stem
Huma reg using larger plenum
1/2-20 adapter with Tanto
Monstrum 1-4 x 20
2 magazines
Includes OEM pistol grip/trigger assembly
OEM forearm
OEM skeleton stock
OEM forearm bracket.
2 sears for the OEM pistol grip---stock sear for use on 7/8 tubes and raised sear for use on 1.25 Gen 1 Marauder tubes.


Tune easily adjusts from 3 mags of FTT 14.66gr around 740 to over 4 mags around 710fps by adjusting hammer spring. Reg is pretty low, IIRC around 110-115bar.

Very sweet shooter. This prod barrel is a bit loose, prefers larger head sizes. Does NOT like CHP's. I only feed it FTT 5.54's and it does 1.5-2" at 50 yards with these. I have no clue how it shoots other pellets, it took out so many pests with FTT's I had no reason to try anything else.

anyone know the cost to have a FX Boss revealed?

I had posted the beginning, this is the end for now.

Standard air tube, 148 bar, ported, ebay plenum, self made guage block, lighter 15 gram hammer, softer spring, adjuster one turn out.

According to Rsterne, regulated guns should be set at 5% below the knee. That would be 845 with this tune.

I'm a bit below, averaging 834 for 35 shots. Five full magazines! I'm going to be happy with that for a lightweight, midrange hunter, knowing that just dialing the spring up will bring 900+ fps 29+ ft lbs with this combo.

This gun maxed at 35 ft lbs for a few very loud shots.

I shot the gun down and noted that as the reg got lower and lower, 100 bar was 799fps. Who knows how many 800 fps shots a tune for that velocity would yield. 50?? A little quick math says 54 shots!

The valve was over opening at that point as it got louder and louder as it dropped to 708 at 72 bar.

RAW HM1000x .22 cal Chassis rifle.
Was purchased new from Utah Airguns in March or April. Bought it to feed my airgun addiction. The rifle is awesome of course. Trigger is as phenominal as everyone says. Rifle is in perfect condition. There is a small burnish mark on hand guard (see photo). It is not down to bare metal. It’s more like a mark where something rubbed against it and buffed the matte finish to a slight shine. It was there when I received rifle from UA. It either happened at facory or at UA because I examined rifle as soon as I opened it’s foam case. Additional photos on request. Includes case and one magazine.
Scope and mounts are not included. Basically selling because I have two FX Crowns that pretty much cover my needs, and am kinda partial to traditional stocks.
$1350, I will put $50 towards shipping.
USPS Money Order or personal check.
I do not have a paypal or similar payment service account. I have sold many items on AGN and have an excellent rating. My listing for rifle is 100% accurate and truthful.

Picked this gun up from AOA in April. It’s been a lot of fun to play with but want a new toy. It’s extremely accurate with many different pellets/slugs

Whole story is in Industry Feedback so I won’t post it here, just some better pics. Same Aztec Emerald and 0dB moderator as on the Wolverine .22, the Red Wolf is .22 as well.

harrison twnp
(metro detriot)

its more fun shooting with others.

After the recent raid in Arkansas, Libery is under the gun ( pardon the pun) and rightfully so. I own one and thought I was the only one that could get into it but it seems Liberty will hand over an access code to the three letter agencies so they can open your safe without a warrant.

Is there supposed to be a gap (about a millimeter) between the shroud and receiver, or is there supposed to be contact between them?

IMHO: The 10 days and 10 posts rule injurys the buyer and seller and creates negative experience for new members. Can someone explain how barring new members from being able fully participate benefits Airgun Nation. This rule creates a lose lose scenario seller lose and Buyer, Buyer loses change to purchase his prize and feel like a member. Instead a collector googles say crosman - search bring him to Airgun Nation but he doesn't know that even after signing up the new member is second tier or less than a full member.

The rule forces participation in your site after it blocks you from particiapating really frustrating situation, think about it is it smart to force involvement. Please name for me one incident in the world where participation is forced and the situation is consider positive. I cannot think of a single example postive reinforcement as result of force complaint.

Can a moderater explain why we barr new menber from contact other members?

1. The ability of 'air' to carry water vapor depends mostly upon pressure and temperature, so an increase in pressure or drop in temperature can cause condensation. - The fact is that the air is hot going in, so it cools in the tanks, and that's the most significant and common event that leads to condensation inside the gun/tank.

maybe too much coffee thinking ? what if you cool the air before it enters your gun or tank ? an inline chiller . compressed air from your compression source enters a chiller (thnk a cooler full of ice water ). Then enters the water/ oil filter then fills the tank / gun ? would that cold air/ water vapor release the vapor into the filter medium before it enters the gun / tank ?
Like i said , maybe too much coffee ?

After watching some airgun videos last night, I learned that the owner of Donny FL is also the co-owner of Sabre Tactical. I had no idea that Sabre Tactical makes gear for military use. Now I’m not sure, but I read about Sabre Tactical starting in New Zealand. Interesting backstory. I wonder how Donny hooked up with this outfit. Anyone know?

Carl Harris - Sabre Tactical on LinkedIn

.

Hey Guys,

I'm looking for something very quiet in .22 caliber to shoot raccoons in my backyard. I don't want my neighbors to hear it. I have no set budget. I currently have a few leshiy 2's and a steyr x pro but I was wondering if there is something even quieter? I've heard the marauder in .22 is very quiet - is this with or without suppressor? Thanks so much!

Just thought I'd share this!

Hello,

We will be launching three new calibers this month.

Stay tuned,
Maja Brlec

Howdy guys! Temp is finally falling back, today is forecasted to be the last day in the 90’s (we will see!). That means air gun in the backyard more!

Snagged some Airgun Silhouette targets on the cheap and am enjoying them very much!


- Brent

Which vintage rifle is giving 10 shots in the 10 ring at 10 meters 10 -10. maybe a just a bragging, with target proof? I am the a new guy on this board so I thouhjt I would see if any vintage 10-10 shooter were lurking around on this forum. Probably should show targets if you are going to brag a little in public because 10-10 should be just passe for this members with vintage target rifles and years practice. I did not mean to suggest any of us are getting "old" just because we brought the vintage new we are original owners.

I just cannot see so good so scopes make a "gentleman with a few years under his belt see that 10 ring thing. Remember the bell targets years ago those were fun. 10 shot got you a ring!
Also I am aiming to buy a few vintage pistols from other members who are selling. Funny how many people were showing for old Hyscore pistol so they really popular?

Or is it just CTShooter in on an Ad so folks show-off all their wares kind like CT Shooter ad started a thread reaction? cool interaction I like the Hyscores it would be good to buy more.

Buy More --Wow -- That is a thread topic. Not sure if spending too much on airguns is just a problem in our house. Think I will post that in air pistols too since vintage handgun are and enjoyment I like to indulge.

Just right and just in time for squirrel season.​

This resin printed moderator is 30.5mm (1.2") x 89.9mm (3.62") and 1.75 ounces (49.6 gm).
It is almost exactly the same size as a Huggett Atom. It weighs 1/3 less and it is rated at 35 fpe.

I've tested it on my Stormrider and was shooting one ragged hole at 25 yards with no wind.
If your gun will do it, this moderator will do it.

1/2 UNF threads printed (no steel insert)
177 caliber
$40.00 to your door.

This moderator contains 3 baffles. It can not be disassembled. Cleaning is accomplished by soaking in warm soapy water, threaded end up over night. Generally this is done by my testers every few thousand rounds. Particularly egregious fouling could be removed with any household cleaner as the plastic is not sensitive to reasonable use of acetone and/or denatured alcohol.

CONUS only.

I will ship outside of CONUS but we will have to work out that price.

PayPal only. I will send you an invoice after I have your email address.

Money back upon return if you are not pleased for any reason.
Contact me for return postage if necessary.

Buy More --Wow -- That is a thread topic. Not sure if spending too much on airguns is just a problem in our house. Think I will post that in air pistols too since vintage handgun are and enjoyment I like to indulge. Wife sent me out to get help so I went to the one of those meetings . . . .My name is 10-10, and cannot stop buying airguns. Hope you guys have sense of humor. My wife jokingly states she sending me AA= Airgun Anonymous. Lately my weakness includes adding Hyscore rifle and pistols to collection even through they are really just Diana Models (rifle) by a lots of makers.

Not sure if this thread should not be posted in the classified ad member forum, lol or haha (pick your laughter). Do not want the moderaters firing squad for posting in wrong section or forum I am really new to this post stuff, So If I can find an Airgun Anonymous meeting I will admit to wanting to buy more Hyscore pistols too (I have few, already), But I want more more more lol haha. I read the membership stuff about new guys not being able to send message for 10 days so I cannot interact and send messages for10 days to other member so all the joking aside I am looking to buy more Hyscore pistol?

This resin printed moderator is 31.8mm (1.25") x 90.4mm (3.62") and 1.98 ounces (54.4 gm). Just right and just in time for squirrel season. I've tested it on my Dragonfly and was shooting consistently under a penny at 40 yards with no wind.

1/2 UNF threads printed (no steel insert)
22 caliber
$40.00 to your door.

This moderator contains 3 baffles. It can not be disassembled. Cleaning is accomplished by soaking in warm soapy water, threaded end up over night. Generally this is done by my testers every few thousand rounds. Particularly egregious fouling could be removed with any household cleaner as the plastic is not sensitive to reasonable use of acetone and/or denatured alcohol.

CONUS only.

I will ship outside of CONUS but we will have to work out that price.

PayPal only. I will send you an invoice after I have your email address.

Money back upon return if you are not pleased for any reason.
Contact me for return postage if necessary.

Got him this AM sitting in a tree. Two shots under the chin did him in. Hit the ground and never moved. AEA SS Hades 22 cal 15.89.