so im looking into getting a pcp going to be using this to shoot coons / birds and squirrels mainly. My #1 concern is the whatever i get needs to be quiet .
so far ive looked at a couple brands thinking .25 cal . i want something thats on the more compact side not a bullpup but not a airforce texan . ive looked at alot of the bigger brands like fx/ airforce /aea some others as well hatsan and few more not really sure i want to spend that kind of $ atm. want more of a entry level gun . i do like the air venturi avenge-x classic but with a moderator its a really long setup for what im looking for i follow this youtube hunter guy (fowlers markery and mischief) saw he uses a Kral puncher so i did some research seems to be a decent gun other videos and post i read seems to be pretty accurate for short range shooting .
what i did find and like the look and size of is a Kral puncher jumbo thinking maybe found one that which is like a little over 400$ shipped + would likely do a moderator
any other suggestions let me know im open ears

​

​

Please… can somebody tell me the diference in between this 2??

Hi Everyone. Many of the people know me from this forum. Bought lots of items many times. Last my two purchases were prophet 2 compact .177 and Deltawolf .25

Prophet 2 i receved in brand new condition as the seller told me.

But the deltawolf........
Per the sellers words, it had to be like new. only 30 shots done from it and then stored because of the electric system he was not feeling comfortable with.


I received it with chinese bottle when the seller told me its 700cc but in reality it is 500cc. And kept the original one for himself.
It was missing the cheekpiece and after some time seller sold me that cheekpiece with screws from something else. They are thinner and longer. so this cheekpiece is useless untill i get correct size screws.
the gun screws were loose. almost all of them. Why did he or somebody do this i dont know.
The regulator is Dead. Slow filling and overnight goes 15 bars higher then set pressure.
The gun case is full of fur. Somebody shaved a cat in it.


But all what i wrote thats nothing compared to the problem which i noticed when i charged gun fully and took it to test accuracy. shot 1 pellet, then i reloaded and pellet is stuck somewhere in the barrel. Lever is stuck and wont move forward. Luckily we had Key set and removed the barrel and the surprice. Some idiot drilled the transferport with a dremel or something even worse. He was hoping to shoot slugs from it and he made a hole bigger that 25 cal JSB king. We were shocked when we saw how the pellet got stuck into the transfer port. I will attach pictures of the barrel in what condition i receved the gun.
It is fixed now, barrel is machined like from the factory. yes its shorter now because we had to cut off the transfer port and make new one.
And i will order new regulator too.


Seller told me (But that he sold me the gun for half price!!!!)


But what do you people think when it has non original bottle and lied about capacity, losen screws, everything dirty and dusty with a cat hair everywhere, killed regulatator, killed transferport(Barrel)? is it good purchase?

I added Michael into our chat and the seller offered me the original bottle like compensation and when i agreed he disappeared. He does not answer my calls or text messages.

I did not want to open thread like this. I am not that kind of person but i want that everyone saw what he sold me

I call people like him scammers!

Just went on Amazon to buy some crosman .22hp's that normally cost $ 6.41 a tin. Now they went up to $9.99 a tin. I knew it was going to happen sooner or later. Still a lot cheaper than JSB and my guns love them!

the whole 9yrds.....
with fx 300cc bottle
and ninja regulator with fill adapter and both gauges
DFL 1/2x20 adapter
printed moderator that works excellent
2 carm mags and 1 oem mag & 1 ebay mag from canada.
the gun loves the hades pellets and also cpd's and hp's
dave took out the bag rider at my request.
i have over $780 invested in this, so $600 shipped to you CONUS
reason im selling, is for another project build.
SCOPE AND RINGS, NOT INCLUDED
paypal friends with tracking info.
will be shipped in a hard case and outer boxed.
thanks for look'n

Hello everyone

OK, PLEASE read all of this:
I purchased this rifle 10/03/2023 from High Pressure Pneumatics and have shot a bit over 2000 pellets to date, shoots really good and held air up until 11/12/2023. I noticed that the air cylinder was losing air over night from 3,000 down to 2800. I am not a gun smith and do not want to work on this rifle. It will cost me approximately $25 to $30 to send it back for $3.00 worth of new seal to be installed, so if you are a person that enjoys working on air guns I will offer this at a reduced price of $345.00 and I will pay the shipping to lower 48 states. PLEASE NOTE: I am selling this rifle “AS-IS”, I do not want any misunderstandings concerning this sale.


I originally paid $446.00. Comes with three (3) factory Magazines and all of the original factory accessories and original factory box and another outer shipping box.

If you decide to purchase I will list this on my website so it can be paid with a credit card.

Scope and Rings DO NOT go with the sale.

Ships Free to lower 48 states ONLY.

Please contact me if you have any questions.

ThomasT

Polycase design's this projectile , Very effective ! will a Air gun provide enough spin force to use this design ?

Selling for $320 and you pay shipping.

It will shoot 16gr Zans 770fps at. 2(4.5) from 3000psi and work ot's way down to about 640fps to about 1700psi and maintain .5" -5/8 " groups. It prefers the 13.4gr Fx pellets and will shoot those moa at 33yds. It is not regulated, and the only marks on it are the ones in the picture.

What can be expected at 50yds with a unmodified but tuned FX Crown using pellets?

I tried touching the screen on the phone it seems to make it better? maybe to dark?

The compressor arrived in excellent condition. Instructions are simple and easy. Based on the reviews, I flushed the cooling system with distilled water several times until the water ran crystal clear. I then let the pump run unstressed for a bit to let everything break-in and "seat" property. I closed the bleed for short periods to add a little stress before actually doing the dead head test. It only took 26.6 seconds to reach 300 bar.

If you saw my previous thread, I was a little worried about the coupler. Upon trying it on the Wildcat MkIII, along with the FX supplied coupler, I dare say, the GX coupler is actually smoother to operate and feels like a better connection. Guess I won't need an adapter for now. But, I now know a good place to get one, if I do!

I have been gingerly shooting the original fill from SPAW. I sighted in with the FX 18.1's, then swapped to the longer rail for the Immersive 14x50 and sighted in for the Atomics. I've since taken three squirrels. I've shot three and a half mags and that got me to ~175bar. I set the stop at close to 232 bar as my eyes would let me. Set the backup at 240. I hooked the Wildcat up to the CS4, turned on the fans, then the compressor. I let it cycle a little, then closed the bleed valve. It built to ~180 quickly. Just a few short minutes later, it hit the shutoff. If the gauge on the gun is remotely accurate, I think that's about as close as I could get. Especially for the first time!

This was super simple and about as painless as it could be, sans the external power pack. For my needs and at $504 shipped, I think I made the right decision. I guess I'm now one of the guinea pigs in this experiment. First tenth on the hour meter. Time will tell so, we shall see...

Thank you to all who have replied to my posts, pm'd, and for the ones who provided the excellent historical content to search. It's made my introduction to PCP's much easier.

I have been waiting for several months for the Altaros M24 to be available for shipping to the USA.
I just checked today, Nov 15th and web orders now being taken.

Here is a breakdown on my order which includes shipping in case anybody else is wondering about the total cost.

10 boxes ATP Queen .25 cal slugs 10 boxes ATP KIng .25 cal slugs = 282 eur
Altaros M24 .25 - Magazine version 1256 eur
Adujstable cheekpiece with DASTA cover 57 eur
Silencer with muzzle brake LONG .30 86 eur

Products€1,685.70 Shipping€272.00 Including total tax€0.00 Total paid€1,957.70

Total USD including shipping and PayPal fees was $2178.00 USD

I will report back with the timeline for shipping and actual deliver to California.

Rod in San Francisco

I am considering getting an air pistol so I am not yet even yet a newby.

For use indoors or in my back yard, CO2 seems the best choice. For use at my gun club with 25 and 50 yard target berms, a PCP style pistol seems to be correct.

My question: Can I use a PCP pistol for short range indoor shooting if I simply fill it up to a lower pressure?

It is reasonable to assume that the limiting factor for pellet speeds in air guns is the speed of sound in the barrel. If you just let compressed air expand behind the pellet, then the pellet would only accelerate until its speed matches the speed of the expanding air, and the speed of the expanding air can't be faster than the speed of sound.
But, if you impart velocity onto the expanding air itself, then this might be able to compensate for this effect.
A bit like what they are doing in this video:

So, creating a nozzle behind the pellet might actually make it go faster, even if it would be a bit of a choke point. This could actually be quite easy to do on most air guns, by incorporating a choke into the probe (to create a nozzle with the barrel walls), assuming much less air resistance all the way through the port, valve and to the air tank (i.e. higher cross-sectional area).

like this:



(the second choke version is intended to be like the ports on some springers, which have stepped changes in diameter to induce eddies and reduce air resistance)

30% buyer's premium makes it $5000. Bidding war? I did watch the bidding live.
Only about 420 made. Mine's from 1912

Check the pop up box at
www.talontunes.com

What is the best option for making the Impact stiffer and less subject to POI shifts?

Shoots well and no air leaks. It came shooting 35 ft lbs and I’ve left it at that. Less than 100 rounds though it since new. Includes Carm magazine along with stock mag. Also comes with 1/2” x 20 adapter for fitting moderator of your choice If you don’t like the (quite already) original LDC. $500 shipped CONUS in original packaging. Bipod not included. Sorry no trades, so please don’t ask.

The flash on the phone"only took a year"The one on thebottom is no flash,the other 3 are flahers.What da think?

Hello!

I have an Element Optics Theos, New-in-box, for sale. $2500
Also, I have an FX V2 Pocket Chronograph. $220
I will contemplate serious offers.
Thank you,

This is a list of all PCP rifles/pistols I have for sale. Too keep it less bulky, I've only added one picture for each. Feel free to PM for any pictures you might want. Happy to take them.
Traditional rifles/pistol in separate ad. Also the scopes are now up in a their own classifieds post as well, aside from those that mention they have the scope below.

ALL prices include shipping.
I am an individual selling off a collection that I don't have the room to keep. Shipping to lower 48 states.
PayPal, Venmo or Zelle acceptable.


AA T200 .177 - $600




FX Dreamline classic .25 - $1100 (SOLD)
Comes with Athlon Talos 3-12 scope, 1 mag



Brocock Contour S6 Elite .22 - $800 (SOLD)
Hawke Vantage 3-9x40 mildot scope and mag pictured

Ataman AP16 w/Tanto Supressor & Burris 2x20 - $1,100 (SOLD)​

Unfortunately, the mag was lost somewhere along the line. Marked it down again for that.

Matador R5 .30 (Limited Edition) Walnut stock - $1700 (SOLD)​

Comes with All Weather Tac. hard case. #290 of 407 made. Long. Huma reg. installed. (Athlon Argos scope is up for sale separately, if you want it, please let me know. If it's still available I can keep it on).

Daystate Huntsman Regal .25 - $860 (SOLD)​

Comes with Crossfire 4-12x40 scope, single shot plate and one mag.



Leshiy Classic .30 (350mm) - $1200 (SOLD)
Comes with 1 full seal kit and 1 rebuild kit. Does NOT come with the dedal scope (was since sold separately).

decided the uragan 2 needed a fitted case.

would like some suggestions as to what would be a good adhesive to securely anchor the pluck foam in place.

ive tried hot glue and its.....meh.

tried trex tape and....meh.

I have a 1/2" UNF .22/.177 Wylie Kanz moderator made by the forum member @Bullysyclone for me custom. He is known for making very high end products and it is a fully carbon fiber made moderator with aluminum end caps. Here is a thread with more info on them and a review. They are known for being extrwmely quiet. I am only selling it as I have moved on to .25cal and above for all of my guns. These are sold for $180 and mine is like brand new condition, it was never used once. I can sell it for $160 shipped or best offer. SOLD






I also have a 1/2" UNF 0db moderator as well, for .22/.177 these are made by Daystate's sister company. They are also known to be very good. This is the compact version and looks great. They retail for $130, this moderator was bought for a Brocock ,22 that I no longer have an was never used, in brand new mint condition. I can sell it for $110 shipped or best offer. SOLD!

1000 shipped F/X Dreamline .22 700mm slug barrel and shoots pellets awesome as well.
It is in excellent condition and shoots everything i put through it very well. I dont have any heavy slugs but it stacks 17.5 nsa.2175 slugs, right in line with jsb 18.1. It is very consistent with zero leaks or creep. Ships in FX case. Scope, moderator and bipod not included but can be discussed. Doing 32fpe at 102 bar on the reg so plenty more to go up or down in power.

Hello,

I have an FX Impact M3, .30 cal with:

Element Optics Nexus scope

Carbon fiber barrel shroud with harmonic tuner

Donny FL Fat Boy moderator, moderator extender, and air stripper

Saber Tactical extended upper rail, Saber Tactical extended Arca bottom rail

Saber Tactical adjustable buttpad

GRS topmount bipod and adapter

$4,000.