This scope is made in JAPAN! Super clear. Excellent shape, Dot Reticle. The scope is no longer made. 1in. Tube, No scope in this price range will have this clear of glass or more accurate period!
$325.00 will include Rings. PayPal, conus only.

Not in my house. I absolutely refuse to watch commercial advertising driven video content. Not watched (or listened on radio) a single advert in at least ten years. Go forth and multiply, and when you have gone forth a decent distance then try it a bit further.

HW70 Black Arrow is also in stock, great pistol!

The quality audit conducted this week was a systematic review of our company's processes, procedures and products to ensure that they meet Decathlon's strict quality requirements. It was conducted by an independent auditor to verify compliance with our customer's high standards.

The positive result confirms once again that quality is not just a buzz word at H&N, but our top priority. Our CEO Christian Hirschel: "We are proud that we passed the regular quality audit by our important customer Decathlon without any complaints. It enables us to continue to offer our premium products to airgunners in the vast global network of Decathlon branches."

We, H&N Sport, are a German company that produces premium airgun pellets and slugs, and bullets for centerfire weapons and muzzleloaders. Our company, which was founded 1825, is one of the world's leading manufacturers in this industry.

Already Carl Georg August Natermann, the “father” of H&N Sport, had a major goal: to manufacture products with outstanding quality. We continue his legacy in controlling every step of manufacturing our products – from toolmaking to wire production to surface finishing – at our factory.

Decathlon S.A. is an internationally active French manufacturer and retailer of sports equipment and clothing. The range of more than 35,000 different sporting goods offers equipment and clothing for over 75 sports, including hunting and sport shooting. The company operates 1,747 stores in 60 countries around the globe.

Let the industry know which distance you typically shoot!

Let the industry know which type of shooting you like best!

Great moderator, lightweight. Width is similiar/standard to other 40mm on the market (what I would consider medium). Upgraded lightweight end caps. $100 shipped 48 states, buyer responsible for fees. I can take all forms of payment. I paid $134 for it.


Core: Falx Standard Flow rev.1 7.4mm (0.177-0.22) Bore
Thread: 1/2UNF POM Caps (-22 grams)
Engraving: Compact

Ergonomics? Looks? Trigger? Maybe one gun just sounds better than the rest.

I only ask because there are a few guns that shoot amazing but I just don't shoot them often because of how they catch my eye. I'm curious to see how many people are as vain as me vs people who are strictly "its a tool to do a job. Best tool wins!"

Hello sirs.
I’m looking for a good deal pcp for plinking and hunting semi bullpup or carbine Is required.

Please send me your offer.

Budget $1000 max

Just want to say howdy/hello to everyone and take some time to get caught up with everything, it's been about a year and a half to two years since I've been active on here due to my health issues I had to take a break from Airguning and a few other hobbies, it appears that that my health has become somewhat stable so now I'll be getting out to my well neglected shooting range and getting it set up again little by little, I'm also waiting to add another Wildcat in .30 to my collection as soon as one becomes available with my name on it, might purchase a Blitz in .25 just because it looks like a fun range airgun.
Anyway see ya on the forums.

Iv been reading on here a lot about scammers? i might add for you guys that are saleing? write on a pice of paper your e-add. and put it next to the item your saleing.Then if someone try's to steal your pics. It would be pretty weird when another guy try's to sale a item with your e-mail add. "O" spell police don't be to hard on me"Its Willy the Air Gun Nation,

I'm attempting a sear repair on this guy.
It's designed to be able to lock the spring with the stock screw allowing access to the sear.

The trigger is stamped tin with a hard metal inseart in the sear area. The stamped metal was bent there causing it not to engage. I hammered it back into shape on the anvil.

I'm sure the problem will reoccur down the road.

I ordered some Neilson slugs to try in my Cricket 2 .22 cal., I got them today and tried them on my woods range. I got some 17.5 grns. .216's and some .2165's and the .216's are the winner of the day. I tried each size by starting at lower fps and worked up to where they were the most accurate...the .2165's were not really bad but the .216's were the most accurate, shooting them at 965 fps. They came just in time as me and my son in law got a new permission for squirrel hunting and we had planned to go there tomorrow... These slugs are really small but they pack a good punch when they hit a steel target, they should do good for squirrels...I can't wait until tomorrow to try them out...

Here's a couple groups I shot with them at 50 yards.....

I have 2 700mm .25 cal stx liners for sale. One is the normal "pellet" line and the other is the heavy/slug liner. Full barrel and shroud are included if wanted. Looking for $65 each or both for $100

i changed this post, i wasnt sure what i kilt so i thought it best .. anyway, a couple of hours later the action heated up at the coop, and i was putting the mrod .25 to work .. thats been such a good gun over the years and still delivers ..

I'm getting rid of my GRS top rail bi-pod. Yes, the one that has been all over the airgun YouTube channels. It's no longer fitting my benchrest need. Still in excellent condition with the only wear being on the pivot post that the bipod slides onto. Looking to get $350

What is the solution for repairing or replacing the ball bearing latch. This has been a ongoing problem but luckily all parts were found today. Veterans I need your advice!

Anyone knows if Benjamin Marauder magazines work for WAR rifles? I was told that they should work fine, but before I go and order a bunch of them, I wanted to confirm this. I know that this is a very rare rifle and the company which made them went out of business, unfortunately, but I saw several AGN members still have and happily use them. Please advise folks, your help is very much appreciated!

30mm rings 3 sets weaver base one set are adjustble really nice they cost 35$ just for that one set scope is a 4x12x40 simnions 40$ on scope and 40 for rings

I had a rough week. Lots of problems with bad contractors, neighbor boarder disputes and needed a new $eptic $y$tem put in. When that was done I busted out one of my 30s.

Twenty five yards with RS exacts was going well, so I moved to Meisterkugeln and Krale wadcutters to see if I could do better. The Krale wadcutters worked well then moved to the Crosman spinners at 50. One mildot holdover and the smallest spinner became boring. Did I ever mention that I love these 30s? They're great stress relievers.

Hello, I live in the Atlanta area and have a B-40 in .177 that I am not going to shoot anymore. I also have a Gamo Shadow 1000 with a broken main spring and a CDT trigger that will be a freebie along with the B-40. I am a little rough with my rifles so there are some marks. I have no idea the value of the B-40. I will get some pictures shortly.

Price

my first and only pcp airgun is the notos. i’ve opened up the transfer ports and softened/smoothed out the hammer spring action. i have the plenum kit installed and i have a non-branded suppressor installed.
consistent 868-874fps with 14.3
this specific suppressor, when compared to the others i have is by far the quietest one. when comparing it with the others it has a perceivable recoil when i launch a pellet. don’t get me wrong, i actually like it, but is it something i should take into consideration with regard to the durability of the airguns internal mechanisms?
it’s quiet enough that i can hear the pellet swoshing through the air up to the POI. i dont see any swirly pellet flight so POI is consistent.
could i be jedi mind tricking myself?

Match report for the Utah EFT GP and 100Y BR matches August 18-19, 2023.

Utah EFT GP match report

I am short, and wanted to bring down the length of pull to 13 inches on my Impact.
So I made a new Butt pad for it. The butt pad works really good and makes the gun about 1 inch shorter.
Also saves about 3oz of weight and looks cool.

If anyone wants one let me know. I am working on the Final model. Takes 3 hours to print. lol

Been dealing with the chippers burrowing around the house again. They like to use my shed as a rally point. Got one with the GK1 already early this morning, then happened to see one stretching out on some excess pavers stacked around my shed. Out came the notos and as always, gets er done.

Was 25y, in the second pic, you can actually see where the pellet ended up in its back area right before the hind legs. Makes me wish I had a scope cam on the notos but I keep it light as possible.