I have a BSA R10 in good working order. I’m looking for 550 shipped lower 48. Scope not included.

Vintage Kum Bak flip targets. $60 each shipped Two avail. ** SOLD**




Falcon quickfill/mod combo, Fill probe included. $125 shipped ** SOLD**

Anyone know Kragman? TIA Bandito.

So I received my new Sekhmet digital pressure gauge today. I wanted to replace the stock gauge on my Kral Puncher Jumbo .22 because it was hard to read and didn’t seem very accurate. So took the gun apart and removed the bottle and valve block assembly to degas it. Why Kral doesn’t provide a degas valve is a mystery to me. In any event I put the bottle valve assy. in my vice just enough to hold it. Then I grabbed a small C-Clamp that fit the valve block in order to depress the air valve and release all the pressure. It worked perfectly and took only seconds. I removed the old gauge and installed the new gauge. Put everything back together and started to fill the gun with my compressor. Well nothing happened? The gun wasn’t building up pressure? It seemed like it was leaking from the new gauge threads so I removed the new gauge and re-installed the old gauge but with the same result no pressure built? Then I tried filling the bottle removed from the action so I could better pinpoint where it was leaking. From what I could ascertain it seems like it is leaking from the valve itself where the air is released to make a shot. I attempted to remove the valve stem (for lack of a better term) but it would not budge even slightly. I mean that thing is like frozen? This gun is brand new and I have had it apart before to polish all the trigger parts and it went back together and I was able to fill and shoot it without issue. I’m just stumped and more than a little discouraged. I was really excited to put that new digital gauge in and better see how much air I have been using. I am hoping the brain trust here has had some experience with this and can guide me to resolving this. The gun at this point is completely unusable and that is super depressing. Thank you in advance for any help you all can provide.

Is there a 20 or 30 moa rail for dreamline dream tact?

Other suggestions to get more upward travel?

Got some pretty impressive numbers from the gen 1 .22 Avenger build. 2800psi on reg, 3 turns on HS. JSB 33.95 @950s. 1 1/2" groups @ 100 yds. I will post target pics after sorting them for distance. Shot 500 rounds today. Lots of targets, lol. This .22 will easily hit 70fpe. Its a powerhouse. Very pleased with this build.

I'm tuning my air rifle and looking for a local fabricator in Southern California to make the jig shown below from aluminum stock.

This will allow me to mount my air rifle action out of the stock with an air pressure gauge connected to the action and a dual regulated air supply providing various pressure from 140 to 195 BAR and tuning the hammer spring weight and spring tension to find the optimum settings for various pellets and slugs.

Drawing obviously not to scale.

Any recommendations are appreciated.

OK, so I ordered the O-rings indicated on the schematics and rebuilt the Impact regulator. Took my time and only had a real issue with the O-ring in the block. Now I seem to be having an issue getting the trigger mechanism back in and working. From all the videos and schematics I've looked at, getting the trigger back in should be the easiest step. Anyone have any word of wisdom or special techniques to share? Thanks in advance.

Brand new in the box. Still under the warranty
$200+shipping
Thanks.

I asked this question on a few FB groups and got some feed back but looking for more. I saw a rifle review the other day and they were shooting into a solid backstop at 30 yards yet the chrony was recording velocity of the projectile out to 150 yards. This was at least the 3rd time seeing this from multiple channels. My question is does it just guess what the projectile is doing?

I'm not sure if anyone else experienced this. Had the King now for a few months and noticed a pretty big extreme spread and POI change. I keep my settings the same and clean the barrel when needed so I dug deeper. Looks like the hammer chamber in the block is getting debris possibly from the pellet probe assembly and getting jammed up with the hammer. When I took out the trigger, there was aluminum debris all over it. I took a few pics with my bore scope.

Weihrauch HW44 .177 caliber in excellent condition in original box with two magazines, Allen wrenches, fill probe and manual. It’s been a safe queen and hasn’t seen much use. $725.00 which includes insured shipping. PayPal friends and family is preferred but I’ll also accept a money order or a check with a hold for clearance.

2022 Huben K1 .25 Caliber. Rate a 9.5 out of 10 for condition. Comes with fill probe and 3 adjustment tools. No functional issues & no leaks. Payment options are USPS or bank money order, cashiers check, or zelle. Personal check okay but will not ship until clearing the bank. NO paypal. $1375.00 USD/CONUS Trades considered for upper end compacts in .22 caliber (Taipan Veteran Standard .22 Coffee or Grey Laminate) in same or better condition. Send me a PM, lets visit. OBO SOLD!

THIS SALE IS FOR ONE OMEGA AIR CHARGER WITH DIABLO PURE AIR SYSTEM. COMPRESSOR IS FROM EARLY 2021. LIGHTLY USED BY ME TO FILL TANK SEVERAL TIMES AND PAINTBALL CANISTERS SEVERAL TIMES. COMPRESSOR WAS RUN AT INTERVALS WHEN NOT IN ACTUAL USE. VERY CLEAN, ALMOST NEW CONDITION. GARAGE KEPT, COVERED. SALE INCLUDES DIABLO PURE AIR SYSTEM , ONE TUBE WAS INSTALLED BY ME AND THE SECOND ONE IS WAITING FOR MOTIVATED NEW OWNER TO INSTALL AND MAKE SCUBA GRADE AIR!! SALE INCLUDES MANUAL AND PARTS BAG.

LOCAL PICK UP ONLY, IN Santa Monica CA.

$1495

This is airgun related because I use a knife to process dozens and dozens of small quarry each year that I harvest with my airguns.

I'm looking to order a small, fixed blade knife made of steel with the highest edge retention and relatively decent corrosion resistance. S110V, 90V, M390, Maxamet, etc.

I know there are dozens of custom knife makers that can be found with a simple google search, but I also know that the heat treating process is often critical for these high end steels, and if it's not done properly, that $300 piece of steel is close to useless....at least for that price. Anyone can buy an exotic steel blank and make a knife with it to sell, but few can heat treat it properly to fully take advantage of its properties.

Any good recommendations for a custom knife maker?

Any body using Slip 2000 synthetic oil in regards to PCP guns. Thanks!

Selling 5 scopes used for YouTube videos and never mounted on anything larger than a .22 rimfire . Pics show latest Optics Planet price . and in bold black are selling prices . Continental US only . Prefer USPS mail order or PayPal f&f .
Give me a shout at 9032791326
ALL SCOPES $50 OFF price listed

I 100% will NOT sell to anyone who doesn’t text me or call . Messages here will NOT hold a scope just because u emailed or posted I’ll take it

Thanks for looking

Was wondering what someone would trade me for? I’m particularly looking for something lighter and also reasonably making the same power. But, still offer if you’ve got something else you want to trade that might be equal.

Spent some good money on this thing. As it sits now, I’m at 150ish bar on the reg and getting roughly 45 FPE (shooting JTS 25.39s) by my guesstimate using pellet drop as an indicator (my chrony is not working). Camo wrapped for…well camo and plus it looks cooler. It’s pretty darn accurate at 50 yards (5 shot group and not even using 25 grains…that was with OLD 21 grain Beeman Kodiaks). It’s not ridiculously heavy…I was able to carry it all day while hunting with no sling. However, I would rather carry something a little less front heavy.

Shot count with it is ridiculous given it’s a 500cc bottle. I have not counted it…but it’s a lot at 45 F.P.E.!

I have also done modifications to the transfer port (made it bigger). Polished the barrel. Added power plenum + 500cc bottle (fill to 3625 PSI or 250 bar).

It has a DONNYFL adapter with the extension to help hold the liner for better harmonics.

No scope. No bipod. Maybe might include the bottle clamp depending.

Well boys and girls thought I'd see if anyone would be interested in buying my XP Ranger 45 bullpup the stock is made by Mad Dog Stocks makes it very handi for treestand or ground blinds, did I mention it's a great shooting rifle it pushes Mr. HPs 214gr at 997,932 893fps, NSA 220gr 970,921,877fps, MR. HP 250gr 937,884,833fps from a 3800psi fill down to 2700psi, this is on high power and you have 2 other power settings to work with. The barrel is 28" threaded for a moderator with overall length 37.25 weighs a little over 10# with a scope. It comes with the moderator and some bullets to try out I haven't shot anything heavier than 255gr as I like the lighter flatter shoot bullets, did I mention it has a great trigger on it also. I talked to Dan before I decided to list it and he told me if buying new it would cost over $2600 with the moderator and it took me almost a year to get this one. I'm asking $2100 shipped and insurance on you without the scope. Thanks Terry

I know some of this has already been discussed but I have specific questions bulleted below.

I’m finally looking at getting a buddy bottle. My objective is to have gas for when I’m walking in the woods with my GK1 or L2. My current thinking so far is to stay away from Amazon bottles, they seem to have issues with either leaks or have inaccurate gauges. My questions though are as follows-

• Am I missing any entries as seen below?
• Has anyone seen a buddy bottle that does 5000psi or higher?
• Someone with experience with Omega’s HP3 valve, what do you think. Worth the extra cost?
• Does anyone have complaints with any of the models listed?
• For anyone who has an Edgun Peazy on a larger bottle (+1L) is it cumbersome to handle?
• Does the ninja PCP fill valve have a built in bleed screw? Hard to tell from the pictures
• Is there a reason NOT to get a second gauge to monitor tank pressure. I feel like that’d be nice to have. Less wear on the valve from checking the pressure with a dead head…?

Air Venturi Carbon Fiber Air Tank & Fill Station, 90 Cu In | Utah Airguns

Benjamin Carbon Fiber Tank, 90 cu in, Gauge, Hose w/Female Quick-Disconnect | Pyramyd AIR

Ninja EZ PCP 90ci Carbon Fiber Air Tank - Palm Beach Airguns LLC

Guppy 114 Cu In/20 Cu Ft 4500 PSI PCP Airgun Tank – TopGun-Airguns

https://www.airgunsofarizona.com/air-cylinders/omega-18-cu/ft-4500psi-tank-w/hp3-valve-hose-and-qcs/

https://www.edgun.shop/products/premium-carbon-fiber-bottle

Hope everyone has an awesome weekend! Thank you in advance for your input.

I`ve had my marauder for about two years now, mostly shoot for hunting, but in a few weeks i have my firstr competition, I dont have a lot of information about it other than it is two categories (25 and 50 mt) and I registered for both, my marauder is not regulated, so i plan to use it for 25mt, a friend offered to lend me his Air Venturi avenger (wich due to the regulator i plan to use for 50mt), i plan to shoot 18,13gr jsb pellets from my rifle, and out of the avenger.
can anyone suggest a speed/tune for the marauder and the avenger?
keep in mind that i can only fill both rifles at 3000psi since thats what my air tank is rated for.

At Northeast Airguns we carry a variety of brands including:

• AGT Airguns (5)
• Air Force
• Air Venturi (3)
• Benjamin (3)
• Brocock (5)
• FX Airguns (18)
• KalibrGun (1)
• LCS (1)
• RAW (1)

As we look back at which air rifle we sold the most over 2023, it was the FX Impact M3 Air Rifle.
If you're curious as to why, we put together a little video over on YouTube.

But we want to hear from you.
What is your FAVORITE Air Rifle and why?

I’m getting a daystate huntsman revere unregulated .25. I’m curious if any of you guys that own these would care to share information about how consistent they are shot to shot(velocity). can you share what a typical shot string looks like from a full fill to where shots drop off in speed?

Original Weihrauch Diopter rear sight. Excellent condition. This rare sight can be had in either 11mm or 13mm. 11mm fits all Weihrauch/Beeman rifles for the past 40+ years. As shown, I happen to have both bases. In a minute everything switches to either. This offer includes ONE BASE ONLY! Buyers choice. The fabulous feature (to me) on the Weihrauch diopter is the built in stop designed to fit one of holes on the receiver. And they just look elegant. These original Weihrauch Diopters are very scarce anymore. Always expensive, even 40 years ago. But nothing like owning one if your passion is Weihrauch’s. This is an extra to an extra and I’m funding another project. I generally never let these go. $200. $10 shipping. Continental U.S only! Pay Pal or U.S Postal Money Order.

I'm just got my first PCP, a .22 Avenge-X, and wanted to use my Labradar, but am having issues.

I set it to "pistol", set trigger to "doppler", projectile weight to "21.1 gr." set it to arm for "240 sec." And got it to pick up some shots, but kept getting erroneous readings, for example, fired a 10 shot string, it recorded 38 shots, many with ridiculous numbers like 328 fps or 1702 fps. > was able to delete many of these and get an idea of where it was shooting, but there's got to be a better way. I don't have a microphone attachment, how do you guys get your Labradar to work with airguns?