Good shape but if you are picky buy a new one. There are a couple of marks on the wood and the muzzle has a couple spots where a moderator was previously installed.Hardly anything but I've had bad luck with people expecting used price and new condition

Factory parts with ARH moly and tar on the spring. Post in front aperture and the slot screw replaced with Allen head.
Shoots 14.3g pellets at 575 fps
It's a one hole gun at 50' .
I just find myself shooting my HW30 in .22 much more often or my RWS48 when I need power .

Moved on

I was finally able to convert my FX Impact to a true left hand gun! The magazine now inserts from the left side thereby solving cheek weld issues with the high capacity magazine.

Bullet central sells the magazine bracket for the conversion. You will also need a special left hand magazine, which Bullet Central also makes and sells, however they never made one in 0.25 caliber. After waiting a year, another AGN member suggested that I reach out to Orion the Iguna Hunter. I asked Orion if he could make one and to my delight he did!!! It’s basically the same Impact magazine he sells on his website but mirrrored for left hand insert. Mag wheel rotation is also reversed of course.

I have to give Orion a special shout-out here. Not only did he make a special part for me, he also didn't charge any extra. He is really a stand up guy and a true asset to our airgun community.

Like the title says, I’ve got a Notos with bottle conversion (done by firewalker). Comes with two Maple ,7 round mags, one 10 round mag, single shot tray and 2 stock mags. Rifle loves anything 15.89 and under.

I grabbed this for bird abatement, but grabbed two leishy classics at the same time. Scope not included. Picture below was 30 yards and 7 rounds. $450 shipped and insured , PayPal F&F.

Has anyone ever made something that combined a springer and CO2?
Like … injecting CO2 into a springer’s chamber just as the trigger is pulled?

I purchased a RAW HM1000X in .25 about 3 months ago and was told that it was tuned for 33.95gr JSB pellets shooting around 900fps. I am weight and head sorting pellets and while the SD and ES are fantastic I am not having any
luck with grouping at 50 yards. I have tried lowing the fps to about 865 to 910 without much of a difference. I recently decided to try a barrel tuner like I use on my Rimfire and centerfire rifles and there have been some spots that look promising. I am wondering if maybe trying a different weight or manufacturers pellet may be worth a shot or am I just expecting too much from a pcp rifle? I am only looking to use this rifle for bench rest so shooting small is the goal.

I have attached a tuner test from this morning.

A little bit of experimenting with moderators today. Crown MK2 in .22. 380mm barrel running FX 18.1 pellets at 878 fps. Weather was 50 degrees with a 3-5 mph tail wind when I shot. (4) 5 shot groups at 60 yards with each can. Seems to be favoring the 0dB and Sumo.

Just curious who has already placed a pre-order? What configuration did you order and who did you order from?

I'm looking to order a Classic in .22 with the 600mm barrel and synthetic stock. I haven't yet decided who I'm going to order from, but it's down to UA, NEA, TAG and HPP.

Thanks for posting!

Today I am giving away two packages of brand new (10 total) Huma-Air Tuning Hammer Springs for Impact/Dreamline/Crown/Maverick/Wildcat for free. These springs retail from Huma for about $7.00 each, but I am giving them away for free except for charging $20.00 to cover the cost of shipping to anywhere in the CONUS. These hammer springs are used to replace the FX original hammer springs when tuning for more power.
I no longer need these springs and am giving them away for free as part of my "spring cleaning" initiatve. Sometimes I just have to broom out some of the parts I seem to mysteriously accumulate!
All the best, Chuck Peffley

I was watching RTI Mora on the shot show.

The interesting thing is that the person told that the barrel of Mora is free floating. It doesn't touch the block. However if someone needs another point of contact it may be at the point from where the barrel comes out of the block.

Hence maximum two contact points only.

I removed all O rings that hold the barrel of M3 into the block. Then inserted the barrel in M3. The barrel entered butter smooth.

Now I tightened the grub screw at the breach and the barrel holder at the front. No other contact of barrel with the gun.

The POI moved 1.5" upwards at 24 yards. It shows that in presence of O rings there was some stress on the barrel.

Let's see how long it holds POI and what is the behaviour over a longer period.

Just an experiment without any cost.

Bhaur

Gen 1 Impact Carcass
3 OE MAGS 25 cal
2 Large Capacity
1 Single poop tray
Power Plenum
Saber Tactic Rail
Picture self evident
$250 delivered lower. Pm if interested

I was sitting here wondering, as I'm prone to do... Has anyone ever tried to develop a cartridge based air rifle system? Much like the powder burner. Except the "brass" or whatever other type of material contains the gas, and is mated to the projectile. Seems like something someone would have tried at some point.

Haven’t seen this posted about yet so I thought I’d share.

Been wanting one of these for quite some time now! And I'm not disappointed.
10 at 25 yards with Crosman domes in her first sight in session! Pulled one a little high.
Walnut Hunter carbine in .22

Working on my daughters basement this weekend, but had to at least try 3 magazines in my basement 10 yard range just to see how it handles. Put the pocket chrony on and ended up 25 clicks down on the power adjuster to get the JSB 18 gr. Dow to 830 fps. Very smooth and accurate (of course at 10 yds it should be) then the last mag flipped the fun switch to auto and let it fly! Can’t wait to get it outside and see how it does at 25, 50 and 100 yards.

I bought a LCS SK-19 from Airguns Of Airzona. A year later the trigger broke and will not work. AOA told me to send to LCS. I went to their web site, lcsairarmss.com and they have an email address and a "Whatsapp" phone number. I sent an email and Rickey sent me an address where to send it. He said it will take 3-4 weeks to repair. It's been over 5 weeks and Rickey will not respond to my emails. He also will not answer the messages I sent. I google earthed the address and it's the post office. I did a corporate search and LCS Air Arms does not exist. I'm screwed!

Turn them into a target?


Please scroll down for the results.

I have had two scopes recently that I couldn't zero at ten yards because I ran out of elevation. One was 6 inches low. Before everyone starts to tell me about barrel droop the scopes were mounted on a PCP and a multi pump Crosman 362 with a steel breech.

I center the reticle on scopes before I mount them -- saves a lot of adjusting. In most cases the amount of adjustment is minimal.

I returned one and was told it was in spec -- I don't think so. The only way I could zero it was to use a compensation mount. Even then mounted with the reticle centered it took a lot of elevation to zero.

I've mounted a lot of scopes and these two scopes were the only ones that I consider to be defective.

Today I am giving away my used Huma-Air FX Wildcat Reg Tester, and a used FX Wildcat MKI regulator set to 170 Bar, and a Wildcat MKI air tube end cap for the price of shipping. You will have to supply your own air gauge for the reg tester, which requires a gauge with 1/8 BSP threads. I am charging $20.00 for the shipping on these items that I no longer have a use for, which includes anywhere in the CONUS. I will accept payment for shipping by PayPal Friends/ Family. Pictured below are the three items I am giving away for the price of shipping.
All the best, Chuck Peffley

Here around the rancho I take about 50 ground squirrels every year, including (and with compliments) some for the neighbors. It was rainy here today, and they don't like rain. But late in the afternoon it cleared and I went out for a look. This guy was out in the open but when he spotted me he ducked into some shrubs. Soon he popped his head up and I popped his head with my RAW HM1000.

Biggest I've seen. Brought him home and laid him out near the house - hopefully a meal for one of the bobcats who live around here.

Would anyone have Mac 1s phone no.

Hello everyone. It’s been a few months since I’ve posted and before that I hadn’t been posting much, just kind of checking in. I do still read interesting or relevant posts when time allows and try to check the classifieds periodically for great deals.

Alex and I are still shooting and testing slugs, just not as much as we had been with Coop. Our focus as always, are slugs and slug testing. There are some great slugs coming from at least five competing manufacturers. All of these slugs show great promise at very long distances. There are also a few with interesting new designs, concepts and extremely heavy weights for caliber, which is now possible because of the very powerful airguns here in the USA… With more to come! When the weather clears and our range is no longer underwater, I’ll share some thorough results… Accuracy from 50-325yds, the real BC for each airgun/barrel, the best velocity window, the ES & SD from a variety of airguns & barrels(CZ,LW, LW-Poly, Skout, FX, TJ’s).

Anyway, on to my point… There are so many of you here on AGN that I’ve become close friends with over the years, those I’ve met once or twice at a shoot, were in my squad or relay at RMAC, maybe bought or sold from here on AGN, messaged me for slug advice, talked over the phone, messaged via the internet or whatever. The one thing in common is that airgunners are a great group of really awesome people. I wanted to thank everyone again for the outpouring of love and support over the past few months, for the donations, gifts and for keeping us in your thoughts and prayers. We are truly blessed to have so many of you as friends!

Thank you again from the bottom of our hearts, you guys are a great bunch of people!

One other thing, Cooper shot a RAW HM1000x and won a Masterpiece Arms chassis for it at RMAC. He was so freakin excited. We are going to get it hydrodipped in his honor and keep it forever. His favorite color was purple. I’d love to hear some suggestions for a unique hydrodip pattern that has some purple in it… Some kind of purple camo, metallic purple, color shift purple/blue, etc… I just want to know what you guys think would look cool.
Stoti

hello everyone, I got my tin of the new Hades Monsters in 22 cal a little while ago and just got to test them out today. ill just cut to the chase and spare you all the boring details and all that. in my Avenger bull pup shooting at about 890 FPS, at 45 yards they are more than capable of keeping 10 shots within half an inch. pretty decent right? well, move the target out to 77 yards and WOAH! groups opend up to 4.5 inches. to be fair, I didn't expect much better, but I really would have liked better than that. maybe they want to be moving slower, or faster, who knows. I also shot a group at the same distance with the 22 cal JSB 25.39 grain pellets, 7 shot group was 1.5 inches, with 6 of those 7 being within an inch, and 3 of them in the same hole. something to keep in mind, my tin of the Hades Monsters was badly damaged in transit, most of the pellets have imperfect skirts, I did cherry pick the pellets for that group, but even then most of them were still not as nice looking as the normal JSB 25.39gr. hopefully over time this will be resolved, maybe its a weight distribution issue, or maybe just the skirts being bent up. I will possibly test slower speeds, but my hopes are not high, I didn't see any pellet stacking to indicate that they're going to fast, and from what I could see thru the scope (which wasn't much to be fair) the pellets looked to be stable, no flashing or anything like that in flight. have you guys tested these out yet? if so, are your findings similar to mine? just to be clear, I am in no way bashing or hating on these new pellets at all. I love JSB pellets, and I love the Hades pellets, if anything im sharing my lack luster accuracy data because I really like JSB and really want these new pellets to work for them.

Hawke Frontier 2.5-15x50, 30 mm side focus,capped turrets , illuminated reticle LR dot.
In its factory box with its manual. Excellent optical, mechanical & physical condition. Very little use
400.00 plus $25.00 USPS Priority Mail shipping to US. PP

Luis F. Carlo
[email protected]
787 402 9751

For sale*
Thomas air .177 benchrest rifle with extra barrel and Donny fl silencer/moderator adapter. $2950 plus shipping.
I originally bought this rifle hoping to get into wrabf 25 meter Benchrest shooting. Living here in the northeast , only to find there are no clubs near me that participate in it.
In excellent working condition.
Comes with several jets for power conversion from 12fpe to over 30fpe depending upon what class you want to shoot.
There was one minor defect in the anodizing (see pic) that Mike told me about during production, and a couple light scratches on the br block (see pic).
I have two barrels. One poly and one regular barrel.
The stock is a plum purple color. Hopefully the pics do it justice.
Trigger is currently fully adjustable. Picattiny scope rail.
Anyone familiar with these rifles knows the wait time for one of these is over a year.