So I don't want to be too skeptical but I did get a chance to test the new JSB .22's and so far I wasn't overly impressed. I'll keep doing some more testing at 50yd and see what happens. Gotta keep in mind that the hype (marketing) is all about increasing sales. A lot of the redesigns .22 were falling out of favor with flyers, etc so it makes sense that the new improved versions would eventually come out. For any of you golfers out there I'm sure you've bought that latest greatest superman driver that supposed to give you another 30yd on your drive and right down the center.

Because everyone has that feature in their PCP that tells time, why not me! (It's a reconstructed thicker plenum because the original one got cracked, so can't do this in original Steyr, not to immitate unless having a skill of hard fitting and a basic knowledge of pressure per area)

The Mora is ready to fill the stores (so i have heard)

I was at IWA and had a chat with the men from RTI and once again they gave me some information that tikt another box!

Everything about the Mora oozes quality! And is totaly on another level! you if i understood correctly you adjust the speed only with the regulator!
Fully adjustable trigger also length of pull, and what i found very helpfull…. Vent holes were the O rings are situated, so when you have a Oring that failed, you don’t have toe strip the whole gun! Or douce it in dishwas liquide looking fotr bubbles! Below you see a few of the ventholes thet are also on other parts of the rifle.

The safety below is (because of the high kaliber possibillty’s ) a “hard” safety, in other words when ingaged it locks in front of the hammer, so even when you were to drop it from the empire state building that hammer stays in place



Below you can also see the tiny vent hole under the barrel in the action.

Above: The barrel can be used “freefloating” from the breech onwords, but if need be, you can mount a bushing that clamps the barrel just behind the moderater cap to fiddle with the harmonics.



Here is the adjustable regulator blok that you can turn 180 degrees is you have the need for a bigger or “thinner” bottle”

big bottle!!


Thin bottle!




Above you can see the small and wide bottle installed.

Beneath the stock there is a knob and when turned (no tools required ) out you take out (i believe you could do some adjutments) i’ll ask again what it was, distributeurs wanted to place orders so i didn’t want to stand in the way of that.

To be continued!

Ha, my daughter helped out… i’m just a hobby shooter with air for 35 jears but comuters are not my strongsuit
The vent holes!
Wait a minute…

sekhmet 28mm 1/8 bssp digital gage and charger CABLE and updater PRICE DROP
$40 SHIPPED PAYPAL F&F

View attachment GAGE.jpg

View attachment GAGE.jpg

Didn't get into the WMA till a little after 4:00, went to my spot, after 45 minutes or so finally saw two, did my best to stalk to a comfortable range, but they dissapeared.
Then I saw two more close to where I was before my stalk, so I backed out of the edge of the woods into the adjacent clearing so as to not make as much racket.
Upon re-entering the woods, I saw a suspicious lump on a limb close to where the second pair were spotted. Put the scope on the "lump" yep that's a squirrel, but just a little out of range.
Picked a path via limestone outcroppings closer to the intended target, braced my 2250 bottle build on a tree, and looked through my Bushnell AR 6X18 side focus scope for the bogie - wtf? wait, that just it's tail now - it's just moved to the other side of the branch - so I remained braced to the tree, and while I was adjusting the side focus, he moved back into view with his eyes on me, big mistake!



Ammo today was 22 caliber Predator 15.89 gr. shorts, easier to single load since the bolt on this build has an extended probe. Please forgive the wordy post for just one squirrel -

.

Hatsan Sortie .177 PCP pistol for sale "As Is for Parts Only" the gun will not hold pressure and is leaking air from the pressure gauge.
Pistol comes with sights, (1) magazine, fill probe and o-ring seal kit. $85.00 shipped within the CONUS, payment via PayPal only.
I attempted to seal pressure gauge with teflon tape but it immediately leaks from the gauge when tightened. The rest of the gun is intact and in very good condition.

I don't know if this is a good idea. If too much water gets into one of the cylinders it can lockup and cause damage.

Hello, new to the thread and forum. Have a question and I was having a difficult time finding an exact answer. Does anybody have a specific tune that they’ve done really well with, with the FX impact and a JSB exact 30 caliber pellet 600 mm barrel 44.75 grain?

Below is a tune that had been recommended, but was looking for different options as well. Thank you for your help.

1st reg 170 bar

2nd 120 bar

Macro wheel 16

Micro 3.5ish

valve 3.5 lines

Is 28 fpe enough for tough critters like porcupine? Shot a porcupine with the NSA 17.5 gr out of the brocock sniper XR last year. One shot to the head dropped it on the spot. Skinned and gutted the animal. While Chopping it up I found the slug lodged in the shoulder blade! Complete pass through on both sides of the skull. The shot was 35 yards away with 22 degrees incline.
DON'T waste porcupine meat it tastes just like rabbit but takes some time to cook.

Air Arms S510XS
Selling due to acquiring another rifle.
Functions as it should. In original box with two magazines, foster fill adapter.

Asking $950
Shipping extra from SW Ohio


No extras as shown any longer. Just stock gun. All accessories are now sold separately. The butt hook is sold.

Good shape but if you are picky buy a new one. There are a couple of marks on the wood and the muzzle has a couple spots where a moderator was previously installed.Hardly anything but I've had bad luck with people expecting used price and new condition

Factory parts with ARH moly and tar on the spring. Post in front aperture and the slot screw replaced with Allen head.
Shoots 14.3g pellets at 575 fps
It's a one hole gun at 50' .
I just find myself shooting my HW30 in .22 much more often or my RWS48 when I need power .

Moved on

I was finally able to convert my FX Impact to a true left hand gun! The magazine now inserts from the left side thereby solving cheek weld issues with the high capacity magazine.

Bullet central sells the magazine bracket for the conversion. You will also need a special left hand magazine, which Bullet Central also makes and sells, however they never made one in 0.25 caliber. After waiting a year, another AGN member suggested that I reach out to Orion the Iguna Hunter. I asked Orion if he could make one and to my delight he did!!! It’s basically the same Impact magazine he sells on his website but mirrrored for left hand insert. Mag wheel rotation is also reversed of course.

I have to give Orion a special shout-out here. Not only did he make a special part for me, he also didn't charge any extra. He is really a stand up guy and a true asset to our airgun community.

Like the title says, I’ve got a Notos with bottle conversion (done by firewalker). Comes with two Maple ,7 round mags, one 10 round mag, single shot tray and 2 stock mags. Rifle loves anything 15.89 and under.

I grabbed this for bird abatement, but grabbed two leishy classics at the same time. Scope not included. Picture below was 30 yards and 7 rounds. $450 shipped and insured , PayPal F&F.

Has anyone ever made something that combined a springer and CO2?
Like … injecting CO2 into a springer’s chamber just as the trigger is pulled?

I purchased a RAW HM1000X in .25 about 3 months ago and was told that it was tuned for 33.95gr JSB pellets shooting around 900fps. I am weight and head sorting pellets and while the SD and ES are fantastic I am not having any
luck with grouping at 50 yards. I have tried lowing the fps to about 865 to 910 without much of a difference. I recently decided to try a barrel tuner like I use on my Rimfire and centerfire rifles and there have been some spots that look promising. I am wondering if maybe trying a different weight or manufacturers pellet may be worth a shot or am I just expecting too much from a pcp rifle? I am only looking to use this rifle for bench rest so shooting small is the goal.

I have attached a tuner test from this morning.

A little bit of experimenting with moderators today. Crown MK2 in .22. 380mm barrel running FX 18.1 pellets at 878 fps. Weather was 50 degrees with a 3-5 mph tail wind when I shot. (4) 5 shot groups at 60 yards with each can. Seems to be favoring the 0dB and Sumo.

Just curious who has already placed a pre-order? What configuration did you order and who did you order from?

I'm looking to order a Classic in .22 with the 600mm barrel and synthetic stock. I haven't yet decided who I'm going to order from, but it's down to UA, NEA, TAG and HPP.

Thanks for posting!

Today I am giving away two packages of brand new (10 total) Huma-Air Tuning Hammer Springs for Impact/Dreamline/Crown/Maverick/Wildcat for free. These springs retail from Huma for about $7.00 each, but I am giving them away for free except for charging $20.00 to cover the cost of shipping to anywhere in the CONUS. These hammer springs are used to replace the FX original hammer springs when tuning for more power.
I no longer need these springs and am giving them away for free as part of my "spring cleaning" initiatve. Sometimes I just have to broom out some of the parts I seem to mysteriously accumulate!
All the best, Chuck Peffley

I was watching RTI Mora on the shot show.

The interesting thing is that the person told that the barrel of Mora is free floating. It doesn't touch the block. However if someone needs another point of contact it may be at the point from where the barrel comes out of the block.

Hence maximum two contact points only.

I removed all O rings that hold the barrel of M3 into the block. Then inserted the barrel in M3. The barrel entered butter smooth.

Now I tightened the grub screw at the breach and the barrel holder at the front. No other contact of barrel with the gun.

The POI moved 1.5" upwards at 24 yards. It shows that in presence of O rings there was some stress on the barrel.

Let's see how long it holds POI and what is the behaviour over a longer period.

Just an experiment without any cost.

Bhaur

Gen 1 Impact Carcass
3 OE MAGS 25 cal
2 Large Capacity
1 Single poop tray
Power Plenum
Saber Tactic Rail
Picture self evident
$250 delivered lower. Pm if interested

I was sitting here wondering, as I'm prone to do... Has anyone ever tried to develop a cartridge based air rifle system? Much like the powder burner. Except the "brass" or whatever other type of material contains the gas, and is mated to the projectile. Seems like something someone would have tried at some point.

Haven’t seen this posted about yet so I thought I’d share.

Been wanting one of these for quite some time now! And I'm not disappointed.
10 at 25 yards with Crosman domes in her first sight in session! Pulled one a little high.
Walnut Hunter carbine in .22

Working on my daughters basement this weekend, but had to at least try 3 magazines in my basement 10 yard range just to see how it handles. Put the pocket chrony on and ended up 25 clicks down on the power adjuster to get the JSB 18 gr. Dow to 830 fps. Very smooth and accurate (of course at 10 yds it should be) then the last mag flipped the fun switch to auto and let it fly! Can’t wait to get it outside and see how it does at 25, 50 and 100 yards.