*** SOLD ***

I bought this gun used last Fall from Airguns of Arizona. Haven't really shot it much as we haven't really bonded. Don't like the feel/form factor. Give me a Crown in a GRS stock and I'm happy as a pig in slop. But this gun is no Crown wearing a GRS stock.

Took some 50 yard shots with it this morning. The on-target performance shows that I'm not much of a marksman, and that I'm not all that comfortable over the gun. Only one screw up on my part though, where the trigger broke earlier than I was expecting. Trigger has been set up by previous owner as pretty much a light, clean single stage.

Gun comes with 5 each FX magazines, a single shot tray and a CARM single shot loader (the latter being my preference). Plus the owner's manual and the OEM FX hard case.

Gun is in very good condition, but has some little marks on it courtesy of the previous owner. I've tried to show all of them which I see in the photos below. And it looks like it is missing 2 bolts from under the barricade block? Don't know what's up with that.

Price is $1,400 shipped to an address in the CONUS, with payment via PayPal Friends and Family (the only form of electronic payment I have).

Thanks for looking,
Tom

EDIT: Not really looking for trades, but you can always offer. I have been thinking about maybe wanting to try a full size Sidewinder in .22 or .25...

.

Anyone had any experience? Original or new HP?

What do you think?


Audio: Cage the Elephant - Mess Around

i just realized that i have not seem any posting by ( i think Mike ) but might be wrong , hope all is well..

To the entire cast and crew. Enjoy.

Crosman SSP250, 177cal, came across another one that I'll be letting go. No time to test, no time to tinker so selling as is. Figure on it needing a reseal. Has the earlier round breech, missing the front sight but comes with the shoulder stock. $150 shipped. Breeches all sold.

Was seriously effing them up tonight from 10 to 15 yards, off an old tripod sending CPHPs. Took at least twice the amount filmed and pictured. The Atomic XR and the Zulus were simply ruthless… Am still head over heels with my Atomic, it really is a wicked little gun…

Hello Friends,

Up for Sale today is a pristine Vortex Strike Eagle 1-8 sfp for $275 TYD. PayPal f&f CONUS. Looks like these retail for $449 on optics planet currently. I’ll even throw in the mount to boot.

Any questions call James 949-363-3011

Happy shootin’ fellas.

Looking for one. Let me know what you have.

Thanks.

AoA has 4” and 6” models of the Diana Raptor .177 pellet revolver, as per AoA’s website the gun is manufactured by Daystate.

Anyone have any experience with these? Seem to use the same moon clip type pellet carriers as the Gamo revolver, but unsure of compatibility.

Is this gonna be about as close as you can get to a Umarex 586, but in a Python?

Daystate rifles seem to have a solid reputation, could you expect close to the same quality of manufacture at this sub $200 price point?

Well I pre-ordered a Dynamic 35cal. Was wanting some slug recommendations for the rifle. I'd appreciate any other suggestions also.

Thanks,

Mike

Hello friends,

I have a carbon fiber hand guard for a 450 mm barrel. This one is 150 shipped PayPal friends and family or at 3%. CONUS ON BOTH. Handguard realistically works on either 250, 350, 380, 450 mm barrels works beautifully with a mod 40 housed inside of it.

Thanks for looking
James
949-363-3011 for text.

Beautiful example of an RWS mod 6. Has new seals and springs.

Pistol with 2x beeman scope - $350

Pistol only - $225

Prices include shipping

Edit to add: I've shot 900 pellets now in this T9. It really likes JSB Diabolo and Hades, almost no issues with these. Will have to wait for the proper bintac certified slugs to be made for it. I was just shooting at 20 yards with it and it's a fun pistol to play with!

So I just got my bintac T9. Seemed like something fun to play with. The only time I can get it to fire a full mag in semi auto is if the pressure isn't all the way up to 4500psi. At full pressure after the first shot it won't reload, I have to pull the charging handle back to chamber another pellet. It seems to work better if you don't try and rapid fire it. It also doesn't fit very many kinds of slugs since the magazine is so narrow.

I have 7 kinds of slugs in .357. Most won't fit. I have some zan slugs that fit great but it won't cycle them correctly. I bought some texoma T9 pellets but they are too long for the magazine, I tried filing them down but no luck. Polymags are way too long. I got the best results with pellets. The JSB hades and exact .35 pellets worked better, but the only thing that would fire reliably was the pellets that were included with the gun, they don't have a brand on them.

I did figure out that if you have a threaded western rattler adapter from donnyFL it will thread on to the T9 barrel and let you use a moderator. The threaded rattler shroud screws on also. I'm going to test DB readings in a couple days.

When the thing fires correctly it's pretty accurate at 15 yards, I haven't tried it at any distance yet. I seem to get 16 shots from 4500psi, but the first 8 are a headache having to pull the handle back and try not to double chamber rounds. After 16 shots I was down to around 150 bar.

Just thought I would share. I've only shot about 4 mags through it so maybe I'll get it dialed in and figure out why it won't work in semi auto at full pressure.

This is one hell of a little rifle. Originally was a “pistol” but converted to rifle. Breech is machined to accept a mag and single shot tray. Currently has single shot tray installed. Has a Huma reg and Donny fl adapter. Has a custom balanced valve and nylon lightweight hammer made by @mackeral5. Currently set to 750 fps with 10.3 gr pellets. Comes with 2 mags, original forearm, and original pistol grip. Stock has some scuffs and scratches.

Rifle and accs. - $400
Rifle + dfl tanto - $450
Rifle + scope and tanto - $625

*scope is a Blackhound 4-14 ffp

All prices include shipping. All prices firm, no wiggle room.

I was thinking of trying a soft tune kit for an R1 carbine that’s in need of attention. I happen to have new original spec seals and a factory spring in my parts collection. Can I achieve something close to 12 ftlbs and a softer shooting gun by cutting the new factory spring? If so what would be a good starting point a far as number of coils to remove? Am I totally off base here and need a different wire diameter to achieve my desired results? Thanks in advance for any experienced opinions.

Hi all. I just received a brand new Athlon Ares ETR 3-18x50. It was purchased along with a bel ghost. The shop set it up and zeroed at 20 yards. When the shipment arrived to me it was shooting about 3’ low from point of aim at 30 yards. Pressure is showing ok. The fps from my chrono match their sheet. I attempted to adjust the elevation turret to zero the scope thinking maybe it got jarred in shipping. I for the life of me can’t get the elevation turret to turn. The windage turret turns smooth and crisp with ease.

Does anyone have any suggestions on what I may be doing wrong with the elevation turret? I also called the supplier and walked through a couple steps with no success. They suggested calling Athlon Monday when they open, but I was hoping someone here may have ran into a similar issue before and have advice for me.

I'm struggling to decide between a .30 Impact M3 or a .30 Panthera.

The only reason I'm leaning twoards the Panthera is because of the cross-compatability with Wildcat/Maverick magazines which I have several of already.

I like the range of modifications for the Impact, as well as the bullpup style action vs the Panthera's traditional style action that's directly above the trigger.

I'm primarily a benchrest shooter but do a little bit of hunting too. I've never owned a dedicated .30 airgun and I'm just interested in shooting slugs, not pellets. My desired FPS is ~900fps for hunting over longer distances.

If you were buying a new PCP which would you choose and why?

I have a dreamtac compact with a Huma regulator and I won't use it for 3 months. The regulator pressure is approximately 125 bar. Should I leave the tank pressure below that of the regulator?

For sale is this Atomic XT dressed in Ranger gear : folding stock , pic rail for scope mount , and 0db 110 moderator. Anyone that has followed these guns knows what a great pester they are whether at a permission or in the backyard. Quiet , crazy accurate , and reasonable shot count for such a small reservoir. Regulated , this gun shoots the JSB 18.1 pellets at 700-704 for 24 to 26 shots on the reg (20 ft lbs) with the transfer port on high. Dial the tp back one notch and send the 15.89 pellets at 710 -712 fps for 28 to 30 shots on the reg. Extremely accurate and built like a tank , this makes a great truck gun or one to keep handy by the back door. The trigger is one of the best on a PCP with a crisp let off at 14 -16 oz with little to no creep. What you see is what you get ; the gun with 1 factory 11 shot magazine , single shot tray , fill probe with male foster , thread protector , and paperwork. I do not have the factory box but the gun will be packed securely and insured for the full amount . Selling for $1050 including tracked shipping to the conus. Not interested in trades or offers at this time. Please deal by pm . Thanks for looking , Herb.

This Royale is a dependable and accurate rifle. The tank has been upgraded to a talon tunes 480cc carbon fiber tank to reduce the weight. Much better for offhand shooting now. Cosmetically she shows signs of wear but no major defects. Comes with 2 mags and a .25 moderator that is very effective at reducing sound.

$900 shipped with Leupold 3-9x scope

$750 shipped without scope

I am considering an air pistol purchase. My primary purpose would be to get some sight alignment/trigger control/follow-through practice.
I'm considering the Daisy Avanti 747, the Gamo Compact model, or the IZH-Baikal 46M.
I would appreciate any input or alternative suggestions.

I just received a bunch of tins of these new MRD “Lights” today.

I’m hopeful that they are a good match with DS Wolverine R HP. It shoots both the 18.13g and 25.39g very well, but I have a feeling that 21g should be about perfect velocity-wise…

…. I’ll post results when I get a decent wind day.

-Ed