Um no….

Just wanting to see what's out there.

Selling my tank. Haven't really used it in a couple years and just sits in my safe taking up room. It is out of Hydro but a born date of 7/16 has 7 years left on the 15yr life. Maybe took it in a vehicle 3 times in it's life otherwise lived in my safe or my work table in my garage. $350 shipped OBO conus.

My motorcycle needs parts so I’m listing this for sale. Shoots minute of squirrel @ 50 yards with 34 grain pellets. Includes a bunch of Evolve 3D accessories:

Target grip
Shot tray holder
Magnetic foster cap
Hammer spring adjuster
Magazine pic rail mount
Magazine Chassis mount
(2) 3-way pic rail barrel bands. Black and OD green
bipod not included

Manual and Replacement O-ring kit. Rifle holds air just fine. $475 shipped CONUS. Trades not accepted/not interested. Paypal accepted.

Nla

So I purchased a heavy hammer spring for my airicuda and I'd say it was a little to heavy. Backed all the way out it did shoot faster for the first 5 shots but then I went to cock it back and SNAP POW something sounded broken bolt went limp. Took it apart and seen that the little piece that pulls the hammer back ofcourse to my luck had snapped. I'm working with the guy who sold me the spring he says he can make a stainless piece that threads in but I don't see any threads. Anyone have any idea how I could fix this? Jb weld maybe?

UPDATE!!
I've removed the broken screw from the threads with an easy out bit #1
Alien Airguns on eBay is going to send a reinforced replacement pin bolt catch thingy. Shout out to that guy.

Just for background, I’m a lifelong shooter and I’m right handed but left eye dominant so I’m already a “mixed bag” but especially when it comes to air guns with side levers and bull pups with linkages, it seems like a lot of the actions out there would actually work far better “reversed”. There are a few(my Uragan is a good example) that are already set up this way, but I’ve always favored maintaining a shooting grip and a cheek weld behind the optic as much as possible. Obviously on the firearms side these principles weren’t prevalent when the common designs like bolt actions were developed, but with all the more modern airgun actions like side levers and linkages it seems like a better “right handed” set-up would be a lever on the left side and maybe more forward so the shooting hand can stay on the grip and the eye can stay behind the optic while the support hand works the action. There are a few designs out there like the Uragan and the Notos but other than “tradition” and familiarity, are there any really good reasons that aren’t occurring to me why left sided(and forward) action levers haven’t become more standard for right handed shooters?

Hi I want to sell my Daystate Red Wolf red Laminate HP .22 (GC2) its coming with:
Boyt H51 Hard case(Local pickup only)
Savior Rifle case 55
Caldwell Stinger Shooting Rest
Athlon Optics Argos BTR GEN2 6-24x50 APLR2 FFP IR MOA
Sportsmatch HT071 2-Pc Extra High 30mm Scope Mounts.
I am living in Santa Barbara! I can drive as south to Thousand oaks and drive to north to San Luis Obispo. I prefer local pick up because of all accessories those are heavy.
Asking price is $2,099TYD.

I have a Brocock Hi-Lite in .22. Comes with the moderator and the Lothar Walther barrel. Has 2 10 round magazines. I bought it used last year and never even sighted it in. Want to buy different rifle now so this one goes. Asking $650 shipped to lower 48 states. Any questions please just ask.

So here’s the story about 9.. to 10 months ago I purchased an MTC Viper pro from Air Guns Of Arizona. Now the problem I’m having is anything passed 15 magnification is cloudy and the parallax isn’t clearing it up. I sent it to them. They sent it back to me said the scope is perfect, put it back on the gun and sure poop. The same thing is happening again. I got on the phone I told them it not perfect it still very cloudy…..This was the answer. I got ……::::Well don’t use the past 15 so I’m just curious on what you gentleman and ladies would say about that answer

Hello , I have a Maverick VP , .22 cal with a 600mm heavy liner to shoot slugs .I put a power kit with a 14 grams hammer . After changing many times the hammer weight, regs pressures , preload screw lenght...I'm a bit lost and it seems that all these changes put the system out of balance. Actually my 1st reg is on 130 bars , 2d reg on 120 bars , hammer weight 14 grams and preload screw is 6mm out. Despite this I cant' achieve the correct speed to shoot 30 grs slugs , which should be around 930-950 Ft/s . Moreover , when I decrease the hammer power wheel the speed increases ......something must be wrong , but I don't understand what . Thanks for your help .

Just curious if anyone else with an original pocket chronograph is having trouble with the new updated app connecting to it ?

The SCOPEMATECAM S18 a new alternative scope cam that is a bit more budget friendly and really didn’t disappoint.

Come have a look as i set it up for the first time and show you have it works

First Look at a NEW ScopeCam and Real Life test

I'm from California, and sometime in the last 2 years something has happened. Nobody (Amazon, Walmart, EBay, AirGun Depot, and Ima through Bug-a-salt in there too because I could not but the grey one) is willing to, or they cannot ship me for reasons none of them (except big-a-salt) seem to know. I'm trying to figure out what law or new mass punishment my state has imposed on me and everyone. I have entered multiple address, within Southern California, and the aforementioned companies still deny me. Does anybody know what is going on? I'm not happy and I want to know whose fault this is. lol! I want to write a strongly worded letter (nothing scary or illegal) to it or them.

I'm looking to get my first pcp. This gun will be solely for pest control. 35 yards max rabbits and chipmunks. I want a PCP because I am hesitant to mount my sightmark wraith nightvision scope on my break barrel. I'm leaning towards a umarex notos. For the price are there any other guns I should consider? I also plan on hand pumping as I plan to shoot less than 50 shots per year. Any advice for hand pumping? And as far as cleaning the barrel, do I need to use special cleaning solvents or flip the gun upside down when cleaning? I don't want to ruin anything.

Hey Guys,

Please help me decide between these two great rifles. I cannot afford both. I am weighing the differences between Diana 75 and Walther LG55 with a Tyrolean stock.

Over the years I have used the Diana side cocking platform considerably, First I purchased a model 48. Then a recoiless 54 Air King (easy 1 hole accuracry) with 6x24 scope. Sold Air King 54 (mistake) . There is a gentleman offering Walther LG55 witha Tyrolean stock It is very lovely and very pricey. Another fine gentleman has Diana 75 for $ale, the co$t i$ le$$ then the Wather LG55? Any suggesstions, insights and/or personal experiences accummulated by usage are all welcome.

Thank you guys -- I know there are a few a very "accommplished" 10 Meter shooters. luring around here Again Thank you
Kindest Regards,

Randy

Looking to swap Bsa scorpion se 22 cal barrel and probe for a 177 barrel and probe. Gun is New old stock barrel is barely seasoned. Shoots 15,16 & 18 jsb pellets like a lazer beam. Looking to build the scorpion into a Fieldtarget rifle.

Another rats shooting video where I specifically targeted the head using my HW100T and Hades 16gr pellets.

Enjoy.

Looking to buy a notos that’s been bottle converted. Let me know what you have

After watching this video I wonder why we don’t see a modern version of this? A self sufficient frontiersman air rifle seems like it would do well in this day in time with SHTF discussed so frequently. Combine that with hunters and hikers seems like it would be popular.

500fps
45 cal
800psi
Easy hand pumping.

If there is currently anything that checks some of the above boxes above list them.

Conditions were light drizzle for both matches. Second match somewhat better than the first match. Six shooters, nice to have Dan back and congrat to Dennis on his 750 and some fine shooting by all. Louie is out of town.

Old school format here:
Pellet:
1) Joe Friedrich, 250-8x, 248-13x, 250-13x, = 748-34x, FX Crown

Factory:
1) Dan Burbach, 246-9x, 249-11x, 250-19x, = 745-39x, Bergara
2) Ed Gonzales, 248-12x, 246-13x, 250-10x, = 739-35x, CZ MTR

Sportsman:
1) Keith Longerot, 249-16x, 250-13x, 250-17x, = 749-46x, Rem- 40x
2) Dennis Kunkel, 249-12x, 250-15x, 250-13x, = 749-40x, Annie
3) Matt Kellerman, 250-16x, 249-18x, 248-13x, = 747-47x, Annie

2nd Match:
Factory:
1) Dan Burbach, 248-16x, 248-12x, 249-12x, = 745-40x, Bergara

Sportsman:
1) Dennis Kunkel, 250-19x, 250-17, 250-16x, = 750-52x, Annie
2) Keith Longerot, 250-15x, 249-15x, 246-16x, = 745-40x, Rem-40x

Pro:
1) Matt Kellerman, 250-15x, 248-15x, 250-14x, = 748-44x, Annie

Great to see close scores makes for a good time.

Joe

HPP has them in .25 and .22 caliber

Impact M3 .25, JSB KnockOut MKII

Weather: 18.1°C 2.6 m/s clear sky 1014hPa/mbar 29.94inHg 68%

Shot count: 5

Low: 1018 FPS
Hi: 1022 FPS
Avg: 1020 FPS
Spread: 4 FPS
STD Dev: 1.6 FPS

08-Jun-2024 12:23:51;1018;FPS;104.5;J;
08-Jun-2024 12:25:27;1022;FPS;105.3;J;
08-Jun-2024 12:27:03;1021;FPS;105.1;J;
08-Jun-2024 12:28:04;1019;FPS;104.7;J;
08-Jun-2024 12:29:26;1022;FPS;105.3;J;



This is my best grouping, at 30 m. I tried other speeds, the results are more less the same the std dev are less than 4 and spread less than 8 but the groupings are not better than this one. I don’t understand why I can’t get tighter groupings. Any idea ?

Thanks.

Hello Airgun Nation community,

I recently embarked on the exciting journey of airgunning and have been thoroughly enjoying every moment. As a newcomer, I find myself constantly weighing the merits of investing in higher-quality equipment versus starting with more affordable options. I’d love to hear your thoughts and experiences on this topic.

From the outset, I’ve been inclined to spend more money and time learning to use the best-manufactured equipment available. My reasoning is rooted in a few key observations:

1. Quality and Reliability: In my short time in the sport, I’ve found that lower-end equipment often comes with questionable quality and reliability. Issues like inconsistent performance, frequent malfunctions, and a lack of precision can detract from the overall experience and learning process.
2. Long-term Value: While the initial cost of superior equipment can be daunting, the lasting value they provide seems to justify the investment. High-quality airguns and accessories not only perform better but also tend to have longer lifespans, reducing the need for frequent replacements or upgrades.
3. Learning Curve: Starting with better equipment can also enhance the learning experience. Precision and consistency in performance allow for a more accurate assessment of one’s skills and progress, making it easier to identify areas for improvement without second-guessing if the issue lies with the equipment.

However, I understand that everyone’s situation and preferences are different. For those who started with more affordable equipment, what were your experiences? Did you find that upgrading to higher-quality gear significantly improved your enjoyment and performance? Or did starting with budget options help you appreciate the nuances of superior equipment later on?

I’d also like to extend my heartfelt gratitude to the veterans of this sport on these forums. Your wealth of knowledge and willingness to share your experiences have been incredibly valuable to newcomers like myself. Your insights and advice help shape our understanding and appreciation of airgunning, making it a more enriching and enjoyable pursuit for all.

Looking forward to hearing your thoughts and experiences on balancing functionality and quality in airgunning. Do you think it’s worth investing in superior equipment from the start, or is there value in beginning with functional, inexpensive options?

Thank you!
rootdude

My friend Steve from AVS slugs has a wonderfully top condition Vulcan 3 in 22 cal. He would like to trade for a Vulcan 3 in 25 cal. His is a 700mm barrel and he wants the same in the 25 version. If you have one and feel you may want to move to 22. Let me know. I’m on the forum wayyyy more than he is. I’m also more than willing to vouch for the quality of his gear and his honesty. So if this trade is of interest contact me and we’ll get pics and info sent. Thanks.