I thought I'd ask this after seeing a reply in the "guns you regret buying" thread from rokonman, saying basically "all the cheap guns I wasted my money on". I'm pretty sure everybody here has had that experience multiple times, but every now and then you really do find a diamond in the rough, that bargain basement gun that performs like one that costs 4X's its price.

I'd nominate the P17 as tops in this category. I think I paid $30 for mine and it's still going strong.
My Hatsan 135 has also been pretty good for a cheap sledgehammer. I hear stories about the gas rams going flat, but mine is still shooting at 31 fpe about 8 years after purchase.

LCS SK19 .25 CALIBER FOR SALE. 1,300$ ALMOST NEW, EXCELLENT CONDOTION, LESS THAN 1,000 PELLETS SHOT. VERY ACCURATE WITH BOTH THE KINGS AND KING HEAVYS. GOT A VORTEX SCOPE AND ALOT OF .25 CALIBER KING AND KING HEAVY PELLETS ALSO. WOULD TRADE FOR A .30 CALIBER RAW , OR SOMETHING VERY ACCURATE WITH PELLETS. PICTURED SCOPE AND MODERATOR NOT INCLUDED. I HAVE NOT MADE ANY TRANSACTIONS YET BUT I WOULD LOVE TO MAKE MY FIRST ONE. IT WAS BOUGHT AT NORTHEAST AIRGUNS ABOUT 2 YEARS AGO. I DO HAVE THE HARD CASE AND IT WILL BE INCLUDED.

PRICE REDUCED !! I have a mk1 crown in .30 cal. Great condition green camo laminate stock. I will look it over again but I believe it is basically in perfect condition. Has a 600 mm stx pellet liner. It’s not the ultra light crown barrel that comes in the mk2. You could take this set up and with the correct shroud and put this in about any fx gun. The gun was re sealed by trenier air guns last year. The regulator is updated with a brass piston instead of the delrin one. It shoots 44.75 about 850 fps. Great shooter. Will post pics when I get home. Looking for 925 shipped. Scope not included….


I just shot a 9 shot group at 50. One photo is the group…9 shots. The other is the fx chrony string. Shot with fx 44.75.

What do guys think about the

FX Impact STX Slug Tensioned Barrel Kits is it worthy? Does make any difference in power and speed?​

Hello guys. I have a very slow leak in 2 of my gun. You wont notice it or hear it. But if left overnight it will drop about 10 bar or so. And will keep dropping after each night. I know some people use soapy water and spray it. In my experience with soap and water, over time it create rust on the inside. The outside i can wipe it so it doesn't rust but it's the inside that rust. Example I spray it on the gauge and the soapy water will get inside the air tube and rust the inside. I do not feel comfortable using soap and water on a 2k gun. What leak detector spray do you guys use or recommend that will not create rust over time.

2000.00 obo
Can take PayPal as payment***I'm also open to trades.


Looking to sell my epoch.30/22 cal
The gun has the following upgrades
Arca rail
2-.30 cal magazines
1-.22 cal magazine
3- .30 cal 25 in liners
1- .30 cal 35" shroud and liner
1- .22 cal caliber change kit in 25in
1- Donny fl moderator adapter

Gamo Hunter 440 in .177
7.56 gn @ 662 fps....a smokin 7.35 ft lbs!!!

Set aside the 30cal cannon tonight because I didn't want to kill any neighbors on accident. Time get rid of some of these sparrows! Normally it's nothing but headshots but I haven't pulled the trigger on this thing in years. Terrible trigger btw, long as hell but back in the day I loved this thing. Gotta be about 30 years old or more. Used to shoot about 1000 fps, time for a tuneup

Nla

This airgun is really compact and feels great to shoulder and shoot

..

I took this on trade a few months back and have only shot 4 mags through it, I got it to hunt coyotes with however got a different set up for that. In great condition overall with no mag cycling issues with the Hades and Kings I have shot.

1- Leshiy 2
1-. 25cal 350mm barrel
1- Huma Moderator .30cal
1- 350cc CF Bottle
2- Standard Mags
1- Double mag holder by Jack
1- Wrench
Port seals

$2,150 O.B.O. Paypal F&F, includes shipping ConUS
Sorry no trades I already bought a replacement.

It's black walnut season here at Weedy Hill Farm. We have a ridiculous abundance of black walnut trees. Thanks to the red & gray squirrels they pop up like dandelions everywhere. The nuts are still hanging on the trees, green and in their husks. They make wonderful plinking targets.

This one is 41 yards from the back deck railing shooting bench to its base,a really challenging distance for me. This year, shooting from sandbags on the rail, I'm hitting them consistently with H&N FTT's.

I place an order with them a bit over a week ago and I was told that it would be shipped right out to me. As far as I know it hasn’t been shipped and the company doesn’t reply to both phone calls and emails.
Stephen whom I spoke to said he would look into it and get right back has been silent and unreachable. I have a feeling when they see my number they let it go to voice mail. I’ve contacted them today via email and voice mail to cancel my order and refund my money no response. I guess I’ll have to let AMEX take care of it when I dispute the charges.
So buyer beware if your looking to do business with them.

I cannot for the life of me figure out where to connect this compressor to fill this rifle.

Anyone with any experience with this set up, please help!

Thanks!



Just having fun. Shoot true my airgunning nerds!

American air arms Slayer in .357. $750 shipped insured Conus

Ok. This one is more tricky. It’s a nail driver… or was. Killed countless badgers with it. But I let it sit for a few years and now it won’t hold air. Tom (?) at aaa says it is a known issue. He gave me instructions on tapping it down while airing. I tried that with no luck. One of you who doesn’t mind projects could probably sort this in an evening. There are a couple threads here with people describing similar issues. I’m not that guy. I want and need it gone. My interests are swerving hard towards two wheeled money pits vs Air gunning.. To make matters worse my son could not locate the magazine. So this gun is sold with NO MAGAZINE and doesn’t hold air but it Does include a Plano case. Does not include the Barska 4-16 scope but it could. I’ve got plenty of scopes and this will just end up back in a box.

Let’s see. What else can I say: Sold as is with all known issues described above. If the valve will seat and you get Tom to send a new magazine you should have a great piece of hog dropping hardware. When I get back this fall I am 90% sure I can find the mag and will send it to you but I cannot promise.

Conus ship UPS. I feel weird about selling the gun this way. It’s not complete and does not hold air but it is shooter. PayPal FF Zelle or Venmo welcome. Will ship next day. I think this is a fair price but I am open to discuss it if I’m way off. You’re also welcome to offer me more than asking.

HELP! A bike I’ve been coveting just came up for sale and if I can’t show that I’ve divested myself of some older toys I suspect my wife will toss me in a hole, make me rub lotion all over my body and use my skin for new door mat.

This wildcat Was my absolute favorite til I drank the Impact Kool-Aid. It is smooth, accurate, holds air and feels like the touch of your Swedish mistress as she caresses your face after a long day of doing projects for your wife. (Too far?). Includes 3 magazines, the Hugget, the onboard mag holder, Plano case and a bag of magic beans (maybe). Will come as pictured except scope. If you want the Hawke 3-12 let me know and I’m sure we can find a reasonable number. The only thing I cannot find is the fill probe and I’m looking. I’m sure it will show. It’s safely stored in that special place so I didn’t lose it.

$450 shipped conus.

Now the semi legal stuff: No scammers pls. I love fiction but I’m not in the mood today. Probably won’t be tomorrow either. CONUS. PayPal F&F Zelle Venmo Whatever. No trades as I’m trying to save my skin here people.

Daystate Wolverine w/Huma Regulator in 22 Cal. I am the original owner and have the original box it came in. 3 magazines and single shot tray included. 600mm barrel.No dings.
$900.00 shipped.

As new (mounted and used once).

Not a lot to say about it other than I loved it, made a few videos with it, but ultimately I won't be hunting evening critters (I have a wife ) so I'm gonna let this go and stick with red dot's and what not.

I waited months to get this - you'll wait a few days at most. I'm including USPS Priority Mail Shipping, Insured.

Will accept $650 lowest price (It's listed for $100 more on eBay) - payable via CashApp, PayPal or Bitcoin. No checks or money orders, sorry. (they are $700 on the Arken site and don't fulfill immediately).

First come, first served, folks. Feedback should speak for my reliability.

Regards,
Mark

Before I dive in - I’m going to answer the questions you will have from reading the title
- this is not the website’s fault
- Scammers are monsters and will try to get you to click a ‘verification link’
- after being pushed to transform into a Karen, I did inform the website. But if some one else closer is on here, I hope you can help too as the services are usually outsourced to a vendor.

TLDR: verify who you are chatting with if you are using a chat service on either website as they may be compromised with bad actors.

Here is the light weight summary:

My JTS air compressor likely went through a burst disc. It was the second time I’ve used it.
No biggie, technology is allergic to me, I figured I would deal with it later.

I went to shoot my air Venturi avenge x and the magazine got lodged.
Got it unstuck but the action wouldn’t close. 1 very deformed pellet came out and a part of a second one followed.
I couldn’t clear the barrel.

I bought both from airgundepot less than a month ago.


So I hopped on airgundepot.com to try and chat with one of their people. They have been super helpful in the past.

I logged in and clicked around and the chat box finally popped up. There was a picture and a name associated with it, which is what I vaguely remembered.

Chatted and said I needed help understanding if I did in fact blow a burst disc and help getting the broken pellet out of the barrel.

The guy asked me to click a verification link to see my order history. I refused since that was irrelevant. I just needed tech type answers.

He told me to return the unit and that I would have to pay to return it. He gave me a link to print a label. I tried to print this label and nothing would print. It was blank. Then I got the cut off of the top of a usps shipping label ONLY.

He then told me it was because I had to pay 129.99 to return it and that’s why it wouldn’t print.

I said I just want to clear the barrel. It can’t be that hard. He told me it was ruined. I ruined it. I said it was warrantied through Air Venturi and asked to get their contact info.

He said they were a Chinese company and would never answer.

He told me no returns without fees were accepted through airgundepot and a warranty return would only go through air Venturi but “good luck talking to any one”.
He told me I could return and *replace* to airgundepot, but I would have to pay a restocking fee.

He said if I went that route the label would be cheaper.

To make it very clear, he told me this incident was my fault since I bought low quality garbage. Then told me to click another link to see his suggestions for a replacement.
It was horrible at that point, I stopped chatting.

I finally found a number for air Venturi. By this time, I was furious.
Air Venturi called me back today.
Low and behold they are local to Ohio and It wasn’t an VOIP number.

After we both came to an understanding of the drama I had already been through, we realized something was fishy.

I work in tech and have proximity to AI chat bot and live support services.

They get compromised from time to time.

I saved one link and looked at it today. It is a verification vendor that directs to an old comcast id verification service that hasn’t been used in a few years but apparently still active.

When I first saw the link, I brushed it off as “oh I have Comcast, so it isn’t weird”
Let me be clear. It was weird.

Turns out, comcast used to use this service until one data breach and shoddy end of life service later, they abandoned it. But somehow it’s still relevant and in a good enough state to scam people.
They actually perform a soft credit check with this service. They ask for your address and full social with it. Thank god I didn’t verify but it was so easy to have been duped in my emotional state.

Airgundepot pyramid and air Venturi are all aware and the REAL representatives have been AMAZING.

Just be careful. These scammers are getting far too clever and I have a feeling there will be many more chat service scams in our near future!

Was driving home from Tawas City , Michigan and decided to stop at High Pneumatics to buy some pellets. Looked at a new M4 and now it’s all I can think about and I already own two impacts. Whats wrong with me?

Hi Friends,

So I have recently moved to the Seattle area and have a place with a nice visually private backyard, however I still have neighbors on all three sides. I'd love to shoot in my space, but don't want to alert anyone.

I've figured out my almost silent backstop but now need a almost silent pcp. My current stock dosent really cut it, and the only 2 candidate guns I have that could fit the bill are a Prod and slavia 618.

Do you have any suggestions for a low fpe pcp that I can get to almost silent? Smaller is better, as my range is about 15m. Open to any caliber but naturally gravitating towards .17 for the obvious reasons.

Help me spend my money friends!

Howdy,

Im new to Air gun (and new here) want to start attending matches. My main interest in 10m, but I'd be open to other types of matches as well.

The issue that Im running into is actually finding matches. Nearly all of the matches I found are JROTC,4-H or Jr. /The ones I have found for adults are national level competitions.

Are their any on the east coast, preferable within the PA/NJ/NY area? I'd be willing to travel around New England, though since I am starting out I want to keep travel costs lower.

Also, are there any Air Rifle ranges/clubs in the same tristate area?

Does anyone else have this yet?? I'm trying to do a review on it . Received mine but I seem to be missing a cord and so far wolfiek group has not been helpful. With 110v outlets here in the US it seems the power transformer should be used to step up to 220. But no cord comes that connects into the compressors ac port ? Also curious on where to get a battery to power this unit cordless? Any help would be much appreciated

I caught a clip of someone from Air Arms who was talking about the future of Air Arms and that they are going to use Indian manufacturers.

Is this true?

If this is true, Indian steel is terrible for one, only slightly better than Chinese steel.

Will this mean that Air Arms products will be cheaper to own?

Anyone got any information on this, if I find the clip I will post it.