My son was able to take this black coyote at 140 yds at night with my .25 cal maverick sniper. (Shooting Zan 41 gr.) These are pretty rare around here.

B&M big bore breech
16.5" TJ barrel .357
- carbon fiber sleeved
- 1/2 UNF adapter
Don Cothran powerhouse valve
RAI drop block
RAI 5/8-18 bottle adapter (M18x1.5 also available at NewEnglandAirgins)

Comes with the factory fill valve and cap.
Will come will all my 357 ammo as well.

Capable of 150+ FPE

$250 shipped

Ok so I doubt tbere are any .45 sidewinders on the used market, so I’ll settle for the .35. Would also consider new Benjamin bulldog M version in 35 or 45

I have a few options to trade. If interested in 1 or both, we can discuss to figure out trade parameters.

$1100 shipped with savior soft case: First is a Edgun Matador R5M, wood stock with a Bat moderator. Only issue I’ve noticed is the pressure gauge is like 10 BAR off from what my compressor says.

Sold Second is a 2022 Huben K1 with black stock and tanto moderator. Great shape and shoots slugs the best.

Both are .25 caliber.

Also have a NF NX8 2-20 F1 MOAR reticle I’d be willing to trade. I have a few other scopes I could work in as well (Trijicon credo 2.5-10, Optisan 4-16, Leupold VX6HD 3-18x50 in NF rings, Kahles k525-1 LSW SKRM4 in ARC mount).

Will post photos tonight or tomorrow. Message me if you want to work out a trade.

I might also consider other rifles but I’m really leaning towards the sidewinder. Not interested in AEA or similar right now. Would need to be be capable (safely) at LEAST 150FPE and some type of repeater.

Thanks for reading

This is the full interpretation of airgun laws and regulations in Canada. I debated coming online to answer this question. First of all. Law enforcement has absolutely no understanding of our gun regulations. By law enforcement i mean city police RCMP any law enforcement personnel. I'm only saying this one time. So tell all your friends. All airguns rifles pistols markers home defense paintball. 500 + fps / 5.7 j PAL 500- fps no limit for FPE. 400 joules no pal. Period. Both thresholds must be met. You can have a airgun shoot a cannon ball at 495 fps and the energy is unlimited. Crazy isn't it. But once over 500 fps energy is capped at 5.7 joules. That is how it is period in a Court of law.

Sound Tribe ... what happened to him?

Price has been reduced. This rifle is super accurate, exceptional condition internally and externally. Reblued, Maccari tune kit (spring, tophat and spacer). Vortek piston seal adapter with seal, and JM lubes.I just did the chronoy; velocity is 570 fps avg. Asking $1300. Free shipping CONUS. Will be shipped in a hard rifle case. I'm on the Old Yellow Forum BOI with all A++ transactions for the past 35 years and the Airgun Nation Forum with all A++ transactions. Will take more photos if desired.
I'm selling because I want to buy the new Excalibur RevX Crossbow.

It rained for the first time in months. The wind blew. I had my heart set on shooting the "Ol' 97" today but decided to do a couple projects in the shop with it instead.

I made a new little cleaning block that doubles as a breech seal saver.



A safety block for cleaning. You can flip it around for breech seal replacement.



And to prop the comp tube open a bit in storage...



I also made a little grip shoe for it. It's really narrow in the grip and It was annoying. I was always up to my second knuckle in the trigger guard. Now the trigger is under my finger when the gun is in my hand...

Here are a few things I like to do in preparation for an upcoming hunt/outing/range day:





How do you maximize your shooting time in the field?

Does anyone know where to find an M lok to 11 mm dovetail adapter?

What determines the minum length of rifling needed to stabilize a 7.0 grain diabolo wad-cutter for precision & accuracy at 20 yards?

In this thread Chuck and I venture to a Feed Lot (similar to a Dairy Farm, but designed to raise cattle to harvest meat for your table) to help a local farmer with his "pest" problem. For this hunt I chose 2 different airguns:

FX Impact M4, Hawke Frontier scope, Impulse Air moderator, Side-Shot scope cam, .22 cal 22g FX Hybrid slugs at 930 FPS
RAW HM1000x Mini, Hawke Frontier scope, Impulse Air moderator, Side-Shot scope cam, .22 cal 20.8g JSB Monster Lights at 885 FPS

If you want to see how I prepped for this outing click HERE


More video clips to come! Enjoy -Michael

Is there such a thing as a dovetail mounted compact rear iron sight? I recently acquired a .25 caliber Quakenbush short breech with a 8 & 5/8" barrel and wanted to set it up iron sights only -

Any & all advice is much appreciated!

Old AOA pellets. Never opened 177 caliber.
$12 ea. plus shipping

I have just received my Airacuda MAX.

I cannot remove the cap from the moderator adapter.
I tried various pliers, heat gun, penetrating/cleaning fluid, etc

Applying too much force with pliers would destroy the thread.

Does anybody have any ideas on how to remove the cap?

I sent an email to [email protected], since he was doing the warrranty service for these airguns.

This has been fun:



1701P and Prod in AR stocks, each rigged with regs, lightweight hammers and valves modded for extra plenum space. Strikers, poppets and TPs made from PEEK. Tuned to get max power from a .42 spring (prod) or a .36 spring (1701P) for easy cocking. 18fpe from the Prod shooting 16grain JTS and 11.7fpe from the 1701P shooting JSB 10.34s. Custom shrouds make sure these gals don’t spook their targets. The 1701P is barely a blip on the sound meter. Couple minutes and either one can transform to a pistol. Prod gets 24shots and the 1701P gets 18 on the reg:

They’re as accurate as they are pretty!

Is there a "biggest Airgun Show in America?" If so, when and where?

I know it's been on here before and people installed rechargeable battery pack which i have a couple of larger universal for charging s I just soldered on a USB cable omg I can't believe how much better it works on full power this is the original fx chrono I thinks it's before the v2 just never used it because it killed batteries so fast

NLA

Hey everyone, I've had an impact m4 .35 for a few weeks now. I have it tuned currently to shoot 93 grain .357 NSA slugs at 900fps +/-. I was beginning to wonder if a higher than 875-880 fps was possible with a stock piece, and apparently it is. This comes out to a wicked 167 foot pounds. I know with this rifle being so new that there may not be a lot out there about it's true potential and user's experiences. It is truly a work of art when you have this thing to the sweet spots. Cheers everyone

Hello, with the Avenger having been out for around four years, I'm looking for feedback from those who have owned them for most/all of that time. What would you list as the pros and cons of ownership?

Do any parts break after a certain number of shots and do they stay sealed well?

I'm considering one and am looking for feedback.

Thank you,

For a limited time we're shipping our mega popular airgun / rimfire Know Your Limits targets with
thicker 5/16 AR600 paddles at no additional cost.

This will not be a permanent change, I got a great deal on a load of
AR600 and once its gone it is gone.

Act fast if you want one of these limited edition KYL's
that will give you and your shooting friends a lifetime of shooting fun.

https://shootingtargets7.com/products/know-your-limits-target

I just got my Zelos in .25 today for a special project but before I start working on it, I wanted to do a real side by side comparison of the gun, the barrel, special features and any differences.

Cocking handles, selector switch and trigger are the same but the selector switch on the Zelos has some new paint. The Zelos also has its name on the lever side. The trigger guard was aftermarket on the M60 from AGRF and does fit the Zelos if you order one from Wes. There are no other differences




The very first thing I saw was the barrel and shroud. The Zelos sports a 650mm barrel while the M60 sports a 600mm barrel while the shroud on the Zelos makes the gun much longer overall. While that's not a lot of difference, it can have an impact on portability while hunting and pesting as well as backpacking.




The left side of the receiver is where all the fun is. The Zelos gets a degassing screw! YEA! Also present is a new 5k burst disk for safety. I guess I dont see the need for 5k this far after the regulator but hey, SAP, thanks for the effort...





I spoke of the barrel length differences and the Zelos shroud length already but the engineers didn't stop with dropping easter eggs on this gun, we have a 3-3/8" unfilled space for.... something?

Was it going to be a baffle stack? An Insert? A secret hiding place for cash and prizes? Dunno but other than an expansion chamber, it fails as a moderator where about a buck worth of baffles may have sucked but it would have been an attempt at sound dampening.

Opportunity missed....





If you got all this way into this post and missed the first sentence, I'll fill you in on the special project but first, let me ask you all looking at the Zelos and thinking about purchasing one this question. Is there any interest in a 500mm compact version?

Yupper, 500mm, barrel threaded to 1/2x20 UNF at the end, no adapters, no extended shroud. Look at the above measurements, the barrel would end at the 19.6" mark, 2-1/4" past the picrail. Add a 200cc CF bottle, you have a nicely compact Zelos.

I'd like your feedback, good or bad.

FWA

P.S. More to be added as I get into the gun more, like why are the tubes and bottles missing?

I have a buddy that has gotten into airguns. He is a hunter and will continue to lean his pcp barrel on things. Not many PCP's will keep point of impact. I know in the past you could get a Evol, the original Taipan seems solid. I dont know about the Taipan 2. Are there any currently available PCP's that fit that description?

Joe B. gauge works as it should tank gauge and fill gauge comes with whip and foster quick connect. $140 shipped conus. pay pal its the 7/8" thread.
Cell # 985-817-1829