Is there an alternative device that people use to measure head size other then a pelletgage? I wanted a 22cal gage but it looks like I might be screwed. Ordered one but the manufacturer has gone dark with my money in hand.

Jerry L.


Apparently unknowingly I ordered from a distributor and not the manufacturer of pelletgage. I explain further down the thread but to cut to the chase. I got ahold of the manufacturer who has solved the problem, Thank you.

I shoot break barrels but I want to have accuracy benefits of a fixed barrel. (Trust me, I'm a scientist and a statistician and I've studied that topic for many years under controlled conditions. Not trying to start an accuracy debate.) If you disagree, let's agree to disagree so I can get to the real point. I want superior aftermarket barrel options that simply aren't available for breakers but I want the freedom from air pumps or ill just use a powder burner.

Here's the underlever rifles I've been able to find all max out around 880 or lower fps for .22. While these speeds are maybe optimal, in terms of accuracy, it seriously limits the range and knock down power needed for humane hunting. The ground hogs see me 100yds out. I need more than 30-50yds or I can't hit them, regardless of accuracy. I want 50+yds accuracy of a fixed barrel with the power of my break barrels like my Walther Talon Magnum. If fps is too high for accuracy, I'll manage that with heavier pellets. I don't want to manage it with reduced firepower from the underlever.

If the break barrel can achieve hundreds of fps higher using the barrel as a lever, why can't an underlever do it using a dedicated cocking lever?

Target Stock. 177 Cal
Walnut thumbhole .22 cal
Both are tack- drivers.both totally rebuild...
Thanks Martin

Hi. Manual says that M3 valve is fully open when it is 1.5 turn from marking 4.
On my .22 M3 Sniper it actually goes more, like 3 or even 4 full turns.
I was tuning my gun for 34 gr H&N slugs and found out that valve 1.5 turn gives me something like 800 fps, but I get max on 4 full turns - 950 fps. It just does not go any further because reaches the shroud.
The gun is stock with no modifications. 1st reg 170, 2nd reg 140 bar, macro 16, micro 5

Is it ok to have Valve that much opened?
At first I had constant shots, but after some 50 shots the speed was dropping by 20-30 fps.

Before the slugs the gun was tuned for JSB monster pellets 25 gr. And the valve was at marking 4. I was pushing JSB pellets at 914 pfs. (1st reg 150, 2nd 85bar) But now when I tried with pellet after playing with slugs I do not get the previous speed, it dropped far below 900fps. I had to open valve much more to get the previous speed, 3 full turns past marking 4.

Why did this happen, did I ruin something?

Thanks for help.

Like new, maybe 100 pellets through it for velocity testing.

Comes with 2 mags, a 1/2-20 threaded adapter, Niel Clague moderator, westhunter 4-16x44 30mm scope, and hard case.

Very powerful and loud without the NC on it. Too much for my backyard or hunting needs.


$600 shipped

PM me if interested

Ships CONUS only

Will accept PayPal, certified check, or postal MO.

Hi All... been a minute since I've posted on here. I got the chance to checkout the Steyr Pro X from Airgun Sport (new US Importer), and thought I'd share an article I just wrote...

The Steyr Pro X… It’s quiet, semi-auto, balls out accurate, and incredibly simple Austrian quality airgun from a company with over a 100 years of gun manufacturing under it’s belt… in short, I’m in love! I’ve shot quite a few airguns in my day, including all of the what I’ll call the "tier 1” list. With that context, I can say the trigger on the Steyr is without question the greatest trigger I have ever shot… and the fact that its’ on a semi automatic bullpup further blows my mind! My only concern ahead of receiving it was it being .22, as I’ve become accustomed to shooting larger calibers for the bigger bullies. I think this was more of a me problem vs what a .22 is capable of… and with a big ole bully under it’s belt, the Steyr Pro X in .22 reminded me… with the right shot placement, .22 is more than a capable caliber for everything I shoot. I’ve put about 2,500 rounds through it so far, which has me ready to take you through and unpack why this is a must have in your collection.




Barrel / Accuracy:

Steyr makes every piece of this gun in house… including all the custom work on the barrel. Given the pedigree of the parent company… I knew the barrel was going to shoot great, but I was really surprised how well it shot both slugs and pellets with literally zero tuning.

I didn’t have the right pull through cord to clean the barrel… so I literally took it out of the box, loaded some NSA slugs, and pretty much every pellet I could think of. I was going between a bunch of different options, and It was punching dime groups with NSA .216 and .217’s, along with 18gr JSB’s and Hades. Most of the initial shooting was close range of 30 yards, but I can tell at 30 which ammo will have potential at 100+ just by watching the slow-mo tracers. I’m looking at the stability... not so much the group at 30.



so for example… the HN barracuda hunters, the crow magnums, and a few others… they all did fine at short range group wise, but I could tell not to bother taking them long, but the 18gr, Hades, and both the NSA 17.5gr in .216 and .217 were just making one ragged hole after another. I’ve got a bunch more ammo to test, and all the long range stuff… which I’ll get to here soon.

The super impressive part, I was dumping 10 shot groups like that as well as fast as I could pull the trigger. 30 yard, dime’ish size groups while mag dumping. I even slowed it down to double taps to really work on and figure out this trigger, and was able to stack them in the same hole. I had to watch it in slow-motion to confirm! So, a big checkmark in the barrel column… this ones a shooter!



Trigger:

Ok, this gun isn’t cheap, but after shooting one mag you’ll quickly think you got a crazy deal. This is without question the nicest trigger I have ever shot. The giant cherry on top… it’s a semi auto bullpup! Bullpups are notorious for terrible triggers, but not this one.

The first stage is smooth, but different… it's like squeezing a spring… it’s heavy compared to first stages on other triggers, but clean. It almost feels like it’s a safety feature given the semi - auto. It butts up against a firm wall, and then a super light and clean break. You can adjust this if you want, but out of the box is like 8oz.

While just sending a single round down range is amazing, the magic in this trigger is that the gun cycles and is ready for the next shot without completely resetting to the first stage. You only have to do that once… then it’s game on. Triple taps, quads… even a mag dump are totally possible. One other thing to note… while this might seem minor to some, the trigger blade is super comfortable, and for those double and triple taps… that’s key!



Semi - Auto:

Pretty much every semi-auto airgun uses air to cycle the magazine… which can introduce some complexity into the design, and potential for additional maintenance. Steyr’s gets it’s semi-auto action from a super simple magazine that winds like a clock. This mechanism is hidden and self contained within the magazine itself. You wind it up when you load it, and it simply rotates down as you fire.

The net result is an airgun version of having your cake and eating it too… in that you get the benefits of a really simple gun and a semi-auto action without sacrificing accuracy or efficiency. More of how efficient this gun is in a minute… but real quick… here’s how it all works… let’s assume you have shot a mag, and it’s now empty. You simply pull the charging handle and you can now remove the mag. Load the mag, and then slide it back in. You then simple rotate it like a clock. Close the mag door, put it on fire, and mag dump. Rinse and repeat. You can decock the gun to safely store, or just press this mag release button and remove the mag itself.


Quiet:

For 99% of us… how loud the gun is really matters. The appeal of airguns is the ability to enjoy the gun in the comforts of your own backyard. While you’re seeing the industry shift a bit and focus on extreme long range… for 99% of us, that might be fun to watch, but that type of shooting is not what the majority of us has access to even try.

I run an airgun in my yard to shoot 1,000’s of critters in my yard, and occasionally get to shoot long range at farms. With neighbors on all sides, I need it to be quiet. Without a suppressor this gun is 100% not backyard friendly, but with one… it’s not only a backyard friendly gun for pest control, but it’s an all day kinda shooter… which is good, as with this trigger I promise you will be sending 4 when you normally would send 1!

There really isn’t a need for big can either… I have found the best one so far to the be the new Eagle Vision Sigma M4. It’s small and super quiet. The barrels are not threaded, but the gun comes with an adapter made by Steyr. It’s super strong, and keeps things nice and snug. You won’t have any concerns with a 3rd party adapter.




Efficiency:

For reference, I’m shooting Hades around 890fps and 17.5gr NSA slugs at around 800. You fill the gun to 200 bar, and shoot down to about 120. Over that small amount, I’m getting 6 mags, or about 60 shots at full power. The gun is incredibly efficient. I’ve been using the Peazy to fill it, and I think was able to top it off from 120 to 200 bar at least 3 times if I remember right… the point is… the gun is CRAZY efficient!



Summary:

This gun checks every box for me, but it’s the trigger, simplicity to work on, and insane accuracy that make this worth the price of admission. I’m looking forward to checking out the other guns in the Steyr lineup… which brings me to a fun announcement. I’m going to be giving this gun away as part of the next T-Shirt drop. Make sure to stay connected, as I’ll be dropping the new shirt design here shortly, along with all the details. Thanks again to my friends over at Airgun Sport… they are the sole US importer and retailer of these amazing airguns from Steyr. You can go here to check it out in more detail: https://www.airgunsport.com/store/steyr-airguns/steyr-pro-x/

My First Video With the Steyr Pro X:



Full Article Here: https://www.edgunleshiy.com/blog/20...x-semi-auto-airgun-the-greatest-trigger-ever/

Just as title suggests. For example, I just bought an AGT Vulcan in .25 for $800 with a Donny FL Ronin and 4 mags! Something like that…

I'm looking for The Warcat Wildcat MKII .25 that Utah Airguns were putting these out for a while a couple years ago. Anyone have one they would be willing to part with.

Well, I was ticked because of my mishap yesterday with my circular saw, so I just setup some 2x8s and three pieces of plywood in the garage to plink at. Tacked the first target up and started sighting in. I'm not really sure what range I should be shooting the P-17, but I started sighting in at about 10' or 11'. With no true backstop in place, I wanted to be certain I didn't shoot up the storage totes behind the wood. LOL! Once I was satisfied I had it pretty well zeroed, I moved back to 17'. That should be pretty close to a 5 meter range. I ended up putting 50 to 60 rounds through it. My last 5 were at a fresh target to see how close I was to being zeroed. I was using a Short Range Sight In target I downloaded off the 'Net and printed out. Of the 5 rounds I fired at the fresh target, I had 4 in the red and one that I'm positive I flinched on. That's a problem I have to work on. I have nerve damage that causes some loss of feeling and strength in my right arm/hand. It also causes a flinch that happens when I try to do tedious stuff. If I get really relaxed, it won't twitch on me, but I know I tensed up on the last shot I fired and I did flinch. So, throw that one round out and I had 4 in the red. Not too bad for this gun and a quickly thrown together type of shooting range in my garage. I definitively have to figure out a better situation to shoot in the garage.

As for the P-17, what a blast! It's a real pleasure shooting that thing. I took some of you guys' suggestions and used a rag to close the thing. I also quickly got into the habit of placing the gun on my thigh when I closed it up. Between those two things, it isn't too awfully bad to load it and cock it. Yes, the trigger seems to be very nice for a $35 gun. I can say that for sure.

I did run into one little glitch and I know how to resolve it. After the first 6 or 8 shots fired, I started having trouble getting the pellet into the barrel. It was as if the skirt was too big. It didn't want to slide in place very easily. I had to really push to get the pellet in. I switched to the pointed pellets and didn't have the same problem. Right now all I have is a cheap sampler pack of Crosman pellets. It has flat, pointed, and hollow points in it. It's not even Premier pellets. I got them given to me with the 1377 I got. I expect if I order some better pellets I won't have the same problem.

But, the gun performed perfectly and I got to spend a little fun time with no cell phones and nobody around to bother me. A nice way to kill a little time on a rainy day!

SPF!! this is a left hand FWB300s that was imported by Beeman (San Rafael address). Excellent working condition, shoots and functions as it should. I had a scope mounted on it and was using it for indoor 50ft target shooting. Using 7.33 JSB RS pellets it is super accurate. Averages 643 fps. It started to drizzle as I took photos so there are a few water droplets. Price is $550 shipped OBO to the lower 48. Payment by USPS money order or cashier's check. Drop me a PM if you are interested of have more questions. If you want me to call/text include your cell number.

So I get this certain species of ground bird in my yard that likes to destroy my Bonsai tree's and I eliminate them on the spot. I heard a pair of them out back this morning so I went outside with my little bluetooth speaker and played a few calls and the male came in. I pointed my new FX Impact M3 22 cal Compact at him, aligned my crosshairs, squeezed the trigger, and BAM, hit him dead in the chest with a 15gr Hades! A poof of feathers the size of my fist came off of him upon impact but the little sucker didn't die. He calmly hopped to a lower branch and started singing again. So I hit him again right in the chest with the same result and man, still not dead. I repeated 2 more times with the same result before he finally went to the ground but wasn't dead. This little dude was hopping around on the ground after being hit 4 times in the chest with Hades out of my M3 as was still alive. I walked over to him, he looked me dead in the eye, I looked at him back, put the rifle right up to his head and that was that.
Have any of you dealt with a zombie pest before lol? I got his little girlfriend a couple hours later and 1 shot in the chest was all it took.

Sold Pending Funds! I really, really hate to sell this but I have had some life issues come up. What makes it worse is that I just got it back from having Tim McMurray upgrade it. Tim completely went through the rifle, tuned it, rebuilt the regulator and added a second sequential regulator! Standard deviation is only 3.6 FPS! This rifle is currently set up for light varmint class (or WFTF field target), but is adjustable and can also shoot heavy varmint. The barrel is a brand new Lothar/Walther slow twist poly and it is amazingly accurate with 8.4gr JSB pellets and averages 778 fps. Price is $2400 shipped OBO to the lower 48. Scope, rings and bubble level are not included. Payment by USPS money order or cashier's check. Drop me a PM if you are interested of have more questions. If you want me to call/text include your cell number.

Hello Airgun folks!,

MORE FX AND EDGUN AIRGUNS AVAILABLE.

SORRY NOT ACCEPTING TRADES AT THIS TIME.


***FX IMPACT 30 SNIPER..... BRAND NEW $2100 SHIPPED! THIS IS A POWER BLOCK VERSION! (I HAVE TWO OF THESE)




***FX MAVERICK 30 SNIPER...BRAND NEW $1700 SHIPPED (I HAVE TWO OF THESE)




EDGUN LESHIY2 .25 SOLD! SOLD! SOLD!




***USED .22 CALIBER M3 LIGHTLY USED. VERY GOOD CONDITION. POWER BLOCK $1700 SHIPPED

Thanks everyone for the choosing us when considering your next airgun purchase! We really appreciate your business!

***Free shipping to the Lower 48***. All other shipping locations will be quoted separately if needed. For Sale in the USA only.

Payment type accepted are: USPS money order, Paypal (you must pay 3.5% fee, unless you choose to pay via friends and family). ALSO, NOW ACCEPTING VENMO & CASHAPP. ZELLE ALSO ACCEPTED.

If you have any questions, REQUEST FOR PICS OR MORE INFO, please contact us via email or call:

[email protected].... phone: 971-301-4080 (please leave message/text if no one answers)


If you need tuning services or repair for your airgun please feel free to contact me!

971-301-4080

PRECISIONPNEUMATICPRODUCTS.COM

***SOME OF THE PICTURES ARE GENERIC, HOWEVER WE ALWAYS TRY TO UPLOAD PICS OF THE ACTUAL RIFLES OR PRODUCTS. MOSTLY NEW RIFLES WILL BE GENERIC PHOTOS. YOU CAN ALWAYS REQUEST PICS OF THE ACTUAL PRODUCT LISTED. WE USE GENERIC PICS FOR CONVENIENT POSTING OF ADS.

Got this as part of a trade, unfortunately I do not use fixed power scopes. Great little scope. Clear glass and tracks great!! Rings included. 299.00 new but I am willing to let it go for 215.00 plus shipping.
PayPal F&F or you pay the fees. Thanks for stopping by.

RWS Superdome .177 Field Line 8.3gr Amazon 300 for $4.46.

Have a RAW .30 shoots lights out

Asking $1300 shipped
Text with questions Jim 513-748-7777

Like New conditions. Total running time less than 8 hours. Excellent working capabilities, can easily reach 5000psi. Top off 100 cu ft Great White Tank from 200bar to 300bar around 15mins. Come with brand new factory accessories and maintain parts.

Many thanks for several members PM. This is an original Yong Heng Unit, not any copy. I ordered from authorize dealer and double confirmed with the manufacture. I talked to the brand/manufacture owner several times. He is the designer of Yong Heng compressor as well.

Local pick up only, location CA 91709. No trade, thank you!

I recently purchased this HW100 from a collector. Has seen very minimal use. It's serial number shows it to be made between 2012-2013. What sold me was the uniqueness of the stock. That's where my question comes in. I have another HW100 in walnut. I can only find that these were offered in walnut or synthetic, yet this one is in tiger maple !! Putting it side by side with the walnut stock, it's is identical! All the cutouts, fingertip reliefs in the forest oak, every notch, everything. I can't find ANY name on it to indicate aftermarket or OEM. Seller is getting up in years, and memory fails him. He thought it may have been a limited edition that was won in a contest back then? It is SUPER nice, but it's history evades me. Any help or ideas ?? I have NEVER seen another like it... thanks.

I bought a tuxing 6.8 liter bottle from amazon for $297 https://www.amazon.com/dp/B09CPRRLGY?psc=1&ref=ppx_yo2ov_dt_b_product_details it says manufacture date 9/22 so in 9/25 should I hydro or wait 5 whole years it says retest period 3 years but I see some people dont worry about hydro for 5 years on these bottles, Im not trying to go out like a taliban in my room an have my arm shoot thru the neghbors window. .

Just got this in and I’m not impressed with the smoothness of the pellet loading so I’ll keep my dreamline. Comes with extra magazine as only one was supplied, side magazine holder and Arca rail. Settings are as the gun came. $1550 shipped. Came from overseas. Not interested in trades. Also there is no plug for the fill port unless it is loose in the case somewhere.

What's the avg price spent for a EBR rifle setup. Rifle, scope, rings,bipod..etc

Just curious

Love seeing all the players. Noticed very few " big name " players in the money. ( that I see)
Did they show?
Anxious to see the winner/ rifle/ caliber chart.

Only a year old .25 DL in a Aeron FT stock (laminate grips) with counter weight and 2 pic rails one underneath and one on the side. UTG 4x16x56 scope with Donny FL mod and 2 10 shot Carm mags so you can use lower mounts. It's a great setup only selling to fund another purchase. $1,400 shipped. PP FF PM me if interested. Thanks.

Figured I'd show some love to my Concept XR 22 cal. Been wanting to dress it up for a while and finally got the chance yesterday. Vinyl is Mossy Oak Terra and the shroud and grip is plasti dip camo tan. Didn't realize how much the vinyl has a green tint to it compared to the dip. I may change the dip to the dark green??? Let me know what you guys think! Would also like to see what others have done to there Concept XR's as well...

View attachment 20221010_164008.jpg

View attachment 20221010_164023.jpg

View attachment 20221010_163952.jpg