WTS .177 -- 22 SUMO .. $120 shipped 3 day priority.. PayPal ff or add the fee..

View attachment 20220817_193236.jpg

NOTA benchrest – hard to come by and $$$$ - over $1500 plus shipping and tax

I bought it and then the BR group at the range fell apart so I have no use for it.



TRADES:

TX200 custom stock

HW95/R9 – as above – custom stocks preferred – Maccari or Watts custom


Prefer PayPal FF for payment – would also accept Venmo and money orders if required

...what makes a high-end PCP so quiet compared to my Air Venturi Avenger?

Watching videos of various FXs, and such, all I hear is a slight click when hey fire and nothing more

Thanks,
Ponz

Thomas .177 12fpe in FT stock ($3800 new and 6+ months wait) – one hole shooter as you'd expect. Built, assembled and tested by Mike personally. Shot 3x at the range and few backyard sessions. Absolute laser of a rifle.

TRADES for partial:

TX200 HC

TX200 custom stock – Maccari, Watts, Corcorran, Custom stocks UK, Venom etc customs

HW95/R9 – as above – custom stocks preferred – Maccari or Watts customs

Prefer PayPal FF for payment – would also accept Venmo and money orders if required. I have years of feedback on the old Yellow Forum and bought and sold here too

Hello everyone,

I know everyone has heard the old saying “ it’s like riding a bicycle, you just don’t forget”. Well shooting different air rifles is surely not like the bicycle thing! I have shot my Diana Stormrider all week and although it doesn’t have a great trigger, it really isn’t too bad with a pull of 2-1/2 pounds. I have not shot my RAW for just over a week and decided to shoot the 30-yard Challenge with it this morning. The RAW only needs 6-ounces for the pull so it is a lot lighter than the Stormrider. Anyway I get my target set up and settle down at the bench and get a good look through the scope and BANG. What the heck........ old mussel memory expecting to set the first stage on the trigger at 2-1/2 pounds and I have a wayward pellet. I said to myself, hey dummy this is the RAW, remember it is only 6-ounces. OK throw that target away and put up a practice target and relearn how to shoot again....

ThomasT

Saw these Accu-Tac bipods on eBay a few days ago and I'm curious as to whether or not they're real or fake? Thanks.

***SOLD ***​

Air Venturi Avenger .25 caliber, VG condition great shooter (Scope and Rings NOT INCLUDED)​

$300.00 SHIPPED (Impulse buy, and now thinning out again)​

​

Walmart carts. Oh if Gerhard could..

For your consideration are two Element Helix Scopes. One is SFP and the other is FFP; both are 6-24x50. I bought both new about a year ago and both work without issue.
I don’t have the scope caps or sunshade for the SFP or scope cap for the FFP either. Looking for $250 for SFP and $275 for FFP or $500 for both. The SFP is in MRAD while the FFP is MOA. Shipping is not included due to individual preferences; let me know and it will be sent that way at your cost. Paypal for payment.

Trade silver coins for pcp, $600 value( 24 coins at $25 each) and have a scope i can add as well. Pm, call or text, 8592304410.
Countersniper scope 2-16×44 is shown in pic on my Sniper X2.

Any opinions on the best moderator for an RTI Prophet Performance Compact?

Results are trickling in and it sounds like John Bagakus got 1st place in the 100y
Justin Welch got 1st place in the EFT
Alex Hatfield got 1st place in Speed.

Also shown here is Tom Adams 2nd in Speed, and Mike Bricker 3rd in EFT.




Looks like it was a fun event!

My dad is looking to get into the hobby after seeing my first pcp at work

Looking for a quality shooter in the .22/.25 caliber range

He’s looking to take varmints up to raccoons, and plink some.

I believe the budget is $600-$700 - he’s open to most designs, priority is reliability and precision

Also, if you’re located in the SF Bay Area, Central Valley or anywhere in Southern California (north of SD), we can make the drive and pick up with cash

Thanks as always, hoping we can get lucky for him and find a great option

I'm shopping for a 25 caliber moderator and think I have narrowed it down to the Huggett Snipe. My question is do I get the 22/25 caliber size, or go one size up to the 30 caliber? It will be going on an FX Maverick 700mm barrel. Thanks for the help!

Bullet central and their shroud/barrel tensioner got me thinking because I like the way they look and I would love to have a stiffer barrel on my 35 cal impact.

The barrel on the 35 cal is nearly 14mm and the shroud is 28mm. Aquiring the end parts to epoxy in is the issue, at least for me. So if anyone has experience in putting together one and aquiring parts, let me know as I would be interested in building one.

While looking at the bc version, I wondered if the tension would loosen over time and from just handling the gun. If a different style end cap, where the shroud tapers down to the carbon fiber barrel piece was used near the block, perhaps a cyclindrical aluminum c type clamp could be machined to connect the block with the shroud taper piece to more permanently hold the tension.

Gator and anonymous. Gator Mutant Standard sporting a 19"LW no choke polygon rifled barrel. anonymous shorty with full .177 conversion and 13" CZ .177 barrel and 1 of 5 full conversions to .177 in the USA. Recently sent gator off for new pants. And is back and together now as kryptek raid.

Holds air hits hard, one mag, no probe, AR6 Hunting Master 22 by Evanix RoK made. Metal has some marks wood is very nice grain with a few lil dents, adjustable shoulder pad. Extremely light and compact hunter not plinker…loud w no moderator. Sell for $350 obo Thank you.
Scope mount not included but can be added.

Keahi

…..

• Apr 4, 2022
• Add bookmark
• #1

Mint condition. MIL SCALE GAP reticle. Comes with AADMOUNT flip up scope caps and ZRODelta cantlilevered QD mount. Original box, manual, accessories.
$600.00 PayPal please.

PayPal F&F

Just got my new impact m3 and havent even mounted a scope and rings yet but i got to thinking do i or will i need a stiffening rail or backbone to prevent my impact from flexing when shooting? If soo which one?
Ill mainly be shooting .22 jsb 18.1 grain pellets if that helps any?
There is the possibility of slugs being shot but that would be very limited to just a few here and there.
Are there any must have accessories for the m3?
Thanks

Well, call me stupid for have not find this until now.

If the scope is not perfectly aligned if you zero it at 50 yards and then you shoot at 100 yards you will hit right or left and if you shoot at 20 yards you will hit at the opposite side you hit at 100.

What I always did before today was using two bubble levels, one over the weaver/dove tail rail and another one over the vertical Tourrent of the scope = absolute mess and waist of pellets.

Today I found and confirmed that the best way to assure the scope is aligned is to hang a cord with a plumb at above 70 yards, and use a bubble level over the rail of the rifle. Loose the scope rings, sight at the cord, confirm that the bubble is centered and the vertical axle of the reticle is perfectly aligned with the cord with the plumb. Then fasten the scope to the rings and confirm the thighten did not move the reticle and still are aligned the bubble and the vertical axle of the reticle.

And after that you will hit exactly in the same vertical axle at 100 yards and at 10 yards.

I share this just in case not every of you are smarter than myself and had not found before this way of confirming the dully align of the scope.

This is a a very nice little rifle in.22 caliber. It’s extremely accurate with JSB Hades and JSB Exact pellets. It’s shooting about 860 fps last I checked. It comes with two factory magazines and the factory fill port. I’ll also have a package of orings and tools that go with it. It’s always worked good for me and I’m able to consistently hit a 3/8” nut at 40 yards. The scope and rings are NOT included in asking price. Any questions or concerns just ask.

It was a shame that such a nice PCP with great Potential... Would have such a bad Trigger action!
Out of the box, the trigger was at least 8lbs..If I remember correctly.
After getting new springs. Trimming them down.
You could get a light trigger pull, but it had a hitch in the movement.
If got to the end of the 1st stage take-up, then if I decided not to fire..
If you backed off, the trigger would not return... You would have manually return it!

So I honed both the trigger sear roll and hammer sear arm..using diamond hones



This helped, but not enough.. So I closely examined the trigger sear roll piece.
I decided it could benefit from a 3° undercut.
So I setup my mill......1/4" carbide endmill and 3°angle block....


I setup the trigger sear roll in a jewelers vice. Made sure the sear roll surfaces were square.
Then I set the undercut angle with my angle block.
I blacken the sear surface to make sure I only kiss the edge. I didn't want to move the sear'edge position!
I took very light passes until all the black surface was gone!!
Finally I remove the Trigger Sear roll from the vice and honed the surface. To make sure the surface was smooth!


Well I am Glad to report it Worked Perfectly.
The 1st stage take up is around 12 ozs.

Now if I back off, it will return(reset) by itself!!
The 2nd stage break is about 1.5lbs. Crisp..breaks like glass!!


I love when a Plan comes together as you Planned!
This what make airgunning Fun!!
Stuart