Custom camo paint job. Includes extra magazines, seals and Leapers 4-16 mildot scope. Holds air with no issues.

Soft case NOT included. Asking $450 plus shipping to your area. PayPal only buyer adds 3%. Serious inquiries only.

****SOLD***

***Please call or text me, I’m not constantly checking my PM or emails but my phone is always next to me, so I can respond right away.***

602-489-8828


Up for sale is my DeltaWolf in .25 cal.
Condition is like new. I’ve take it out of the box twice to shoot about 3 mags worth of pellets.
This DeltaWolf was upgraded with the Ultra Valve at AoA before I picked it up new so it’s pretty much the same as a Performance DeltaWolf minus the Arca Rail and gecko grip.

Comes with the factory case, factory shipping box, 2 battery chargers, 2 magazines, extended foster fitting an extra HUMA REG and a couple extra breech orings and factory paperwork. The gun is obviously still under full warranty. Scope and rings not included.

Paid close to 3k after the Ultra Valve upgrade and tax 6 months ago.
The gun shoots beautiful. It’s currently set for the 34grn JSB at 905 fps laser accurate. There’s absolutely nothing wrong with it and not a single mark or scratch. I’m just not shooting it due to lack of time.
Asking $2200 shipped inside the continental US.
Sorry but not interested in trades. I don’t have the time to shoot. Might consider a trade for a Leshiy 2 in .22 cal. just cause I can carry around with me in the truck.

PayPal, Venmo or Zelle are accepted.

602-489-8828
***Please call or text me, I’m not constantly checking my PM or emails but my phone is always next to me, so I can respond right away.***

Factory-regulated and delivers consistent 11.4 fpe and low ES/standard deviation across 90 shots per fill. Includes:
+ factory hard case
+ manual, service book & warranty card
+ Anschutz toolbox
+ spare o-rings
+ Anschutz lube/oil
+ quick set toggle clamps
+ custom DonnyFL moderator adapter
+ Anschutz 1/2” unf adapter for stripper or moderator
+ Anschutz quick fill adapter with manometer
+ walnut forearm with t-rail. This can be quickly swapped if you prefer the stock Anschutz One riser.
+ AJP 38mm scope riser
9.8/10 condition

links to Anschutz website:

• https://www.anschutznorthamerica.com/store/p51/9015_HP_Field_Target_in_ONE_Stock_(014626).html
• https://www.anschuetz-sport.com/en/produkte/9015-high-power/9015-one-field-target/

$2750.00 OBO + shipping CONUS only
7-day inspection period.
100% satisfaction guaranteed. If you don't love it, return it.
Buyer pays actual shipping costs. Will be double-boxed, tightly packed, and fully insured.
F&F or add 3%.

PM any questions. Happy to talk via phone call as well.

I have been shooting Airguns for a little under 5 years and have amassed everything from crosman 2240 magnum spring sets to every shape of paintball regulator and size of scope mount. This is not a brag, more an admission of a tinkerer that doesn’t spend money on alcohol any moer but effectively pours it down the drain all the same.

Anywho, Does it come off insulting to give away old gear?

I don’t find the hassle of resale outweighs the *possible* need of something from my horde but if I see someone that could use it more than me, I’ll gladly rid myself of it before asking for monetary compensation.

The forearm has a couple of small compression marks and two marks on the top of the action where the scope rail was mounted—both shown in photos. Comes with the original box and manual. It has either the Tinbum or Vortek kit installed, but I don't recall which one at this time.

I also have another TX200 stock that is equally nice but has a different grain. The buyer will have the option to choose either stock.

$650 + shipping CONUS only
7-day inspection period. 100% satisfaction guaranteed. If you don't love it, return it.
F&F or add 3%.

PM any questions. Happy to talk via phone call as well. Buyer pays actual shipping costs. Will be double-boxed and tightly packed.

+600 yards.

Includes all pictured (except scope). Additional mags, parts, seals/pucks, upgraded bottle, extended moderator, hard case, factory box with original air tank. Rifle will need to be tuned to your specifics. Asking $2000 plus shipping to your area. PayPal only buyer adds 3%. Serious inquiries only. No tire kickers please!

Hi i am new here
I hope someone could help me with my hw77k
Im shooting it for a while but i noticed that my groupings are change at different shot angles,
Shot from shooting rest
Target was at 20meters
One at ca 40cm from the ground end the upper one at 60cm from the ground

Includes all pictured (except scope). Additional mags, parts, seals/pucks, upgraded bottle, extended moderator, hard case, factory box with original air tank and moderator. Rifle will need to be tuned to your specifics. Asking $2000 plus shipping to your area. PayPal only buyer adds 3%. Serious inquiries only. No tire kickers please!

Hello I am changing my Impact up from FT to 100 yard.

My rifle is a 600MM M3. What are some good 100 yard recipe’s

SOLD PENDING FUNDS Selling my HP taipan veteran 1 long with red laminate stock. Comes with 3 mags,3 mag holders, biathalon lever, donnyfl speed dialer, o ring kit, spare screws, pins, fill probe, LDC, and custom high strength valve kit designed by mountain ghost, $825 shipping included, gun will be boxed, no hard case available, been using an AGT soft case. Paypal F&F, Conus.
Any questions, just send me a PM, thanks.
* High strength valve kit has been sold, price will reflect it.

Have a Taipan vet 1 long in 25 cal. Green laminate stock. Lightly used. Comes with 3 mags, 3 mag holders, Biathalon lever, a spare reg HS and a heavy HS. gun is equipped with a HUMA reg set at 110-115 bar. Single shot tray, pins, spare screws, o ring kit, and fill probe of course. $725 shipping included, Paypal F&F. CONUS. any other questions just PM me. It will come boxed, no case,Thanks.

Hello everyone. I hope you all are having a good day. I’m mostly a backyard plinker. In my city, there’s a city code that requires everyone living in the city limits must have a rock/cement wall in their backyard. My yard measures 25 yards wide. I was curious what you all are using for a backstop (if you use one). I need some ideas. Thanks in advance.

Artemis PP700 Field Target Pistol, converted to .177 with HW barrel by Motorhead. 788fps with JSB 8.44. Very accurate get 25-30 shots with it maybe more... just haven't played much with it, not a pistol shooter. The knee rest can be taken off easily via a couple of screws at the bottom. $220

Typically when I do a lot of tuning (handling lead projectiles) I use a nitrile glove to limit my exposure. Recently, during some higher velocity testing into my indoor pellet trap, I noticed a significant amount of lead dust gathering on my bench in between the muzzle and the chronograph. It got me thinking, and I finally decided to purchase some special soap. This stuff is supposed to remove heavy metals from the skin, so I figured... why not!

Hello all,

I am settled in at the farm here, and got out to do some deer hunting last fall and I actually got one, which was a nice change of pace, usually I don't see any deer. While I was out there, I saw a lot of fox squirrels. I had seen one or two in the past but was under the impression there were not many. I want to get back there in the fall looking for Stewie, as all squirrels are named, indicating their final destination, but will need a little practice and knowledge before then. My Taipan Short in .25 cal is zipping 25 grain JSBs along at just under 900 fps. I haven't warmed up to the scope that is on there, and I think I am going to put my Westhunter FFP IR 3-12x on it.

What do you experienced squirrel hunters use for a zero? I know shots can vary from quite close to as far as one can responsibly take a shot. Do you zero closer and hold over for longer shots? Zero in the middle and hold over/under as needed?

Do any of you use shooting sticks, or just field positions, sit against/lean on trees, etc?

Any advice on how to get my hold over right when shooting up into the trees? Things you do to practice?

Other advice to a beginner squirrel hunter would be appreciated.

Thank you,
-pg

I am having an issue, I use the new Nate Chrony, and it seems that after every 15-20 shots the velocity starts to drop and eventually I get a notification that the sensors need to be cleaned. Sure enough, clean chrono sensors with s cotton swab and run a couple of patches through the barrel liner, and it's already dirty. Once cleaned it goes back to accurate readings.

Any idea why this would be happening? Using JSB or Diablo 18.3 grain pellets. Are these "dirty"? Can I use a brass brush in this liner to clean also? Haven't done anything except patched with Balsrol cleaner and dry patches so far.

This does not happen with my Zelos .25, so I am at a loss for why this is happening with a brand new liner on my Notos?

All suggestions appreciated as usual!

Should I get the GK1 in .22 or .25? And which projectiles (head size) should I stock up on?

Want to buy Tiapan veteran standard in 25 caliber .

I have a .357 semi auto Western rattler that I'm looking at selling. Everything pictured comes with and is brand new. There is a chip out of the plastic near the end of the gun which does not affect it in anyway. Ask me if you want anymore pictures.

Price : 2500$ (I have over 4200$ into it)

Nightvision Scope, small red dot, 300+ slugs of different variations, new case, CS4 air pump etc

I would accept gold or silver as trade but really looking for cash. I am located in the Nashville area and would consider delivering it if within 300 miles and if the price is right. (Gotta love prius MPG) I will not accept money orders or any type of weird scamming attempts.

6158782079

Thank you!

Does anyone know why my FX M4 . 22 shoots the first 3 or 4 low-power shots, for example, at 880 fps, and then evens out at 920 fps? I use 18.13 grain JSB. Thanks for your answers.

Hi All,

Bought this a few months back and picked up a synthetic stock version which serves the outdoor conditions up here much better.

Has a new Huma reg, brass hammer spring lock (to keep hammer spring adjustment in place), carbon fiber bottle, 2 magazines and single shot tray. Laminate stock is in good shape and is the ambidextrous type so is good for lefties or right hand shooters.

Current tune is the MK2 at 850 and are amazingly accurate, also loves the Hades at 900.

A very solid Royale 500!

Trade for other PCP airguns in .22 or .25 will add cash on my end if need be. If you wish to purchase instead of trade shoot me a message.

Scope, rings, bipod, bottle clamp not included.

Buyer disappeared so relisting….

This is one I REALLY wish had a traditional stock….This gun with the Sub MOA barrel is insanely accurate with 44.75 and 50.15 as well as the AEA and JTS variants. Being a big, tall guy the semi-bullpup just doesn’t fit me very well.

I am the original owner. Comes with the AoA power tune as well as 700cc 300 bar bottle, one magazine.

Has maybe 50 shots through it in total.

Note-Atlas bipod, scope, rings, 0dB not included….

Thinking 1650 and we can split the shipping.

PayPal for pmt

Does anyone have a Raw barrel lying around they could accurately measure for being able to make a drop in replacement? Trying to not have to buy one to make one.