Anybody else save old pellet tins? I did because I thought they might come in handy for storing small items, but now they offer a window into the early days of “adult airguns” in the US. They are also a testament to the marketing genius of Robert Beeman, with special properties ascribed to each style, like better penetration with the pointy ones, or the edge on the ram jet that would turn a glancing hit into a knock down blow. I do miss the larger selection in .20 caliber however, only JSBs available these days I understand. Fortunately I still have a good supply of CPs and JSBs in .20 to keep my Daystate going, plus a spare .177 caliber barrel if I get desperate.

Chuck

Help !
Barrel latch screw was loose. Did not notice. Barrel latch lever now stuck halfway on/halfway off shaft. Too far off for threads of retaining screw to engage threaded hole in shaft lever is mounted on. Lever will not come off or push all the way back on.
Suggestions anyone ?
Thanks !

I was just over on GTA & saw someone has received their Pinty Bullpup. It's also called the QM-23. I included a video of it's disassembly. There are more videos on YT. I like that it has the same trigger set up as my P-15. Very easy to adjust. It also shows that it is regulated. For the price I think i'll give one a try.

So getting back into airguns for the year, I decided I have too much over lap with what I have and am wanting to get something different. I haven't owned something larger than .22 in 4-5 years at least and I would like one. I don't have alot of experience with .25 to be honest. I think one would probably be better than a .30 for me but when I've owned a .30 in the past I really enjoyed them. If I go .25 I want one shooting a 34gr at 880fps ideally or a .30 would be 44gr at 880fps. I'd like some recommendations on some bullpups that aren't 4ft long lol.

This lovely 31" rifle is a compact beast. Gets about 50-60 shots from 300b to 150b.

*EDIT*
The Statement above is old, I have recently tuned the gun to shoot FX hybrids at 921fps and the reg now sits at 160b. Also the tube has been flipped to work as a plenum, so I get about 5 mags now before having to refill the gun.

I'm selling because for my pesting job it's just too much and I've found myself having to go back to the car to put it away to grab a less powerful gun to do the job due to target background. Sad, as it handles amazingly with the 10x44 Vector Veyron gun weighs under 8lbs naked.
after all.

Comes with 2 mags, agt mod, gun bag, and accessories the gun came with.


Asking $1200 w/ Mod shipped, scope not included. Or Trade, show me what you got.

What do you guys think of this ?

Been meaning to get me a chrony one day and this might just be it.
https://buck-rail.com/product/buckchrony/

Today I learned that buying pellets on eBay may not be such a great deal.
i was shooting way too many fliers and was thinking WTH. although I don’t normally weigh and sort pellets, I broke out the pellet scale.
Apparently an eBay seller buys lots of pellets and sorts them all out and keeps the good ones for himself and repackaged the losers to look new and resold at a great price $$
I had 10.3’s and two different types of 13.4’s mixed in the same tins….all way out of spec; as in too light or too heavy, 6 tins later I got the idea.
As I bought them 4 months ago…. Oh well.
still good for plinking.
From now on I’m sticking with the big box stores Or my most reputable trusted pellet sellers.

So anyone going to take pictures of this new gun?? Lol Plus get shooting information...

I have an Avenge X classic tube in 177 for sale.
There is a wrench mark on the end of the shroud (included in pics) I removed it to clean the barrel and it was insanely tight for whatever reason.
It has the saber tactical chassis, Discovery 4-16x44 MOA, side folder, Magpul tube and stock, bipod and I’ll throw in some Zan 10gr which it really likes. I only have the original mag for it and the single shot tray. $500 shipped in the lower 48. I take PayPal and Venmo. PayPal is F&F, or you pay the 3.5%.

I have 3 pellet pouches left they are the small hold around 160 .25 pellets and are around 3 1/4 inches total diameter. 2 are finished and ready to ship the third can be customized to your needs. It can have a lanyard loop, belt loop,belt clip. Thanks for looking
Price will be $40 pluss options insured and shipped to you

The bottom pouch is sold

NOTE: If you’re interested in just the pistol without the scope, send me a message.

I purchased two of these in November 2024, one for myself and one for my son. He has absolutely no interest in a PCP Pistol. He loves his air rifles. With that being said, selling a brand new, never shot Huben Pistol GK1 .22 Cal V3 w/Accessories. Again, it's brand new, never been shot.

• Huben Pistol GK1 .22 Cal V3
• Huben GK1 End Cap 1/2x20 Adapter
• Huggett Mini-Magna 1/2x20 UNF
• Huben K1/GK1 Loading Gate
• ARES for Huben K1/GK1 V1-V2 Magazine Release Arm Set (#47, #48, #49, #50)
• Carbon Fiber Gauge Cover & Fill Port Plug
• Burris 2-7x32mm, 1in Tube, Second Focal Plane Handgun Scope
• Detachable Warne Rings
• DonnyFL RYU 1.22 x 5.25 Inch Moderator with (QD) - .25 1/2x20 S79
• Pelican Case 1450 Case

Will be coming from a smoke and pet-free home. This is a really good deal!

Location - Pennsylvania
Price: $1,800 (w/Pelican Case)
Price: $1,700 (w/Std Huben Case, will not fit the pistol with the scope on)

Not interested in trades.

I am in favor of most of our new president's actions but I wonder what impact tariffs on China will have. My favorite P35s easily fit under the now former $800 limit for application of the former tariff. Now I've heard that has gone away. Our less expensive guns and compressers come from China. I guess they will now be a little more expensive. I hope that is the only impact.

Curious if anyone has seen or tried this new Notos plenum yet. I went on eBay looking for the 15cc tube plenum hoping for a little increase in power and saw this one that I haven’t seen before. 25cc and claims to add 60-100 fps. I was hoping for a little more power on the Notos and hope this gets me closer to 800fps. Currently shooting 725fps (18.5fpe) with 15.89g Hades. If this can get me into the low 20s I’d be pretty happy.

Here is a great video on what can be achieved with a tune job. There is a lot of time and effort that went into making this video. I watched it and although I think most of us understand the benefits of tuning your spring gun. It’s a great watch.
enjoy…

I’m looking for a Falcon FN12 in .177 (preferred) or .22, do you have one you’d part with? PM with the details and price.

Thanks!

It seems just 4 years ago the interest in airguns was massive and now it seems to have cooled off substantially, with the crack down on moderators and airguns in general, not to mention the higher cost of airgun over real guns seems to caused a cooling off towards the sport too.
Even selling off old gear seems to be slower also, I've had one of my rifles for sale at a reasonable price for over a years and no interest
What do you think?

It would be nice if they could take ads that have been renewed a couple of times and move them to a section for previously viewed ads. It’s a pain in the a$$ to have to scroll through so many old ads to find a few new ones. Just a thought.

hello.. so back in the day. My Dad gave me a One Shot pellet Gun Pistol.. lost it over the years... anyways.. move out in the Country.. with about 3 arc.. looking to get a few Air Guns.. so the 3 i been look at ... mainly target for me an my 7yr old to learn abount guns a safety ..an shooting Predators.. that get by my chicken coop...
these are local here an in stock... Yea i live here OKC.. not sure there much for air gun shops

Umarex .22 Caliber Komplete Nitro Pellet Rifle​

Gamo Swarm Magnum G3i Air Rifle with 3-9x40 Scope​

Hatsan JET I Air Pistol/Rifle​

Which daystate air rifle is the quietest in .22
I know its the electronic ones but is there any difference in sound level between them? Which one is the quietest

Sigh...my Notos trigger hinge pin (2.5mm x 15mm) rolled off the desk while making a few enhancements and chances are low for recovery. The pin in question is in the attached picture. Any thoughts on where to source a replacement? So far, I haven't found anything via searches.



Thanks for your help!

Hello shooters! I have one of the first FX Impact made FX smooth twist 30 Cal it use to shoot like a dream. Last year it started lobbing pellets, So I installed a new seal kit. My gauge on the bottle reads 200bar the regulator gauge reads 130bar did a leak test from butt to muzzle even let set for 24hrs shows no leaks and gauges never lost any bars. finally shot it 30yrds watched the pellet drop at the front of the target. how disappointing. If any one knows or can tell me how to resolve this issue. Sure will appreciated it thank you!

Here are my thoughts on the scales and methods used to weigh pellets.

We should focus on three key aspects:

**Accuracy** - Is the measurement correct when the scale indicates that a pellet weighs 1.175 grams? Is it necessary for us? Alternatively, are we more concerned about consistency so we can categorize all pellets of a given weight together?

**Precision**—Your scale should be able to read at least two decimal places, but preferably three. If a scale with two decimal places shows that two pellets weigh 1.15 grams each, one pellet could weigh 1.15 grams, while the other could weigh 1.59 grams. Therefore, three decimal points are necessary for precise measurements.

**Repeatability**—This is the most critical aspect. If I weigh a tin full of pellets, I need to ensure that the weight of each pellet reads the same at the beginning and end of my session. Otherwise, what's the point?

Additionally, when choosing a scale, consider the weight of the pellets you are measuring. If you shoot pellets that weigh between 1 to 3 grams, a scale that can measure 50 grams or more may not be ideal, as your measurements would be at the lower end of its range. Instead, look for a scale rated closer to the weights you typically measure. Since I only shoot .22 caliber pellets, I prefer a scale measuring 0 to 20 grams. (Finding a budget-friendly scale with a smaller range can be challenging.)

It's also worth noting that most scales include a calibration weight for their upper weight limits. For example, a 50-gram scale often comes with a 50-gram weight. My scale, however, has a 10-gram weight, which allows me to verify its accuracy much closer to what I typically measure.

Scales come with valuable instructions, such as allowing them to stabilize at the ambient temperature where they are being utilized and ensuring that the surface they rest on is level and stable.

I routinely check the calibration of my scale with the designated weight approximately every twenty pellets to ensure that it hasn’t drifted and to confirm that its accuracy has not been affected by my overloading it during pellet insertion or removal. It doesn't take much.

Please let me know if any of this was helpful.

Geneeus

So I chopped the POI shifting to high winds day to day here sense I got my gun back from warranty. The accuracy is changing between shoots 1 to 1 1/2 mils left to right and 1/2 to 1 mil low or high. I've not touched guns settings sense I've gotten it back! Tomorrow Im doing full chronograph number and trying different scope. Scope now is element optics helix.
Calling utah to getting warranty started. Starting to hate my decision on m4 .177 route. Probably get a lot of haters on FX owners but doesn't change my mind on FX being the best hunting rigs. I'm not a paper shooter so 1 hole groups aren't my goal at all.
Avoid the M4 in .177 anyone looking to buy new. Yes there are people going to cry out and say it's a tuning gun it meant to be adjusted and messed with and I'd respond shut up its a new gun. At least perform out the box before tuning to my individual need's. Hate to bail on the M4 but it might be time!

Not an FX

Bullpup in .22 caliber

Bottle with high shot count

Purported to shoot lights out with Pellets or slugs.

Purported to hold POI

Simple to work on.

Foster fill probe

Bottle/Tank gauge

Regulator Gauge

External Regulator adjustment

External hammer spring Adjustment

Under $1,900 us dollars

The only competition I do is against my last group. My preferred hunting range is 30-120 yards.

Krait X and Uragan 3 are my runner up’s that I like, but they don’t meet my spec’s