Many of us have been waiting for this day and hoping it never came. Well friends, it’s starting. It’s starting in the air-soft world and you can rest assured they won’t stop there.

Been waiting patiently a month for these. First of all I have to thank Bear-of-Gralling because he mentioned them in a post a month ago. I waited a day or two before I ordered. AofA had .20 cal. available. They don’t sell to Can. I had a Can. dealer buy them for me. I ordered a HW30 and a HW50 both in .20. As soon as the two were authorized I told my wife. You know they have a 95 in .20 as well and ironically same as what Mycapt65 just said, I can save on shipping if I get it now. Got all three. She saved the marriage.
‘The 30 has no barrel droop
Needs a cleaning. Every thing is tight.
‘Nice sound shooting. Pellets are tight. Crow
The HW50, no droop
Pellets are tight fit.
Twangy sound shooting. Vortek needed. Easy to cock and operate.
The 95 had a small barrel droop.

I left the 95 on the bench for a scope. I am so stoked to get these rifles.
That’s a R9 on the other bench.
These guns can’t be ordered in Canada since Covid, I’ve tried.
Also the straw that broke the camels back. I ran out of places to put guns. Time to make a more efficient rack. Five springers this month. Help needed.
Is there an Airguns Anonymous?
Crow

I am shooting the Nielsen 33.5 grain and when I pull the sidelever back to cock it and load another slug from the magazine, it's like the side lever gets stuck and doesn't loaf a slug smoothly. Is this because of the high pellet probe I installed from the slug power kit? What can I do to make my magazine load smoothly? I'm at a loss

Good night friends,
I'm looking for a PCP rifle that can hunt and plink an all-terrain.
My budget is a maximum of $1000, tell me what you have. I'm open to offers
Thanks for advance

Just got this FX Mav Compact 177 this week. I've only had time to zero it with Crosman Heavies at 18y after a barrel cleaning.
It's starting out well. Two for two DRT's. I hope to have the scope cam running next week.

Just finished mowing my 100 yard range and had to test my Raw .22 at 100 yards .
Wouldn’t ya know as soon as I get set up the winds pick up in NE Ohio . The mirage was crazy today !
I’m practicing up for the Pyramid cup .
Hopefully I can get a calm day and see if I can get some better targets .

As I fall further and further down the slug rabbit hole...

22 cal M3. Tensioned slug barrel and heavy liner. Any advice on optimizing the slug seating depth using the NSA adjustable pin probe? Are there physical indicators to show when it is seated in just the right spot relative to the rifling?

Just wanted to see if there are any tips before I embark on total trial and error. Thanks for any info.

I placed a bid and thought, "I'd only pay this much for it". It's a beater. I already have some nice ones. Should I install the Vortek 11 ft lb HW55 kit and keep a scope on it? Bend the barrel up. My xxx big man size hands (8 1/2 " long) like the pistol grip. The swell. No set back triggers needed most are too close.
Not really my style, most all my guns are well kept. Except some of my rarest prewars. This thing's ugly.
Maybe put a Chinese diopter on it and let youth etc shoot it "no concerns". Maybe.
Anybody want an old Glenfield scope?

Rifle is excellent and shoots amazing. Comes with two Brocock mags, one CARM mag, one CARM single shot adapter, two Brocock single shot adapters. Also comes with Brocock picaninny riser mount. I'm selling to finance a bench rest gun. $1100 plus shipping.

I know you can't buy them new anymore it seems like but does anyone know of plans to make one? My wife I need to put her to work. Lol

Thanks
Jon

I have a basically new ToAuto compressor for sale. This one:


This was my 3rd (back up to the back up) at our secondary family residence that we have sold last year. Maybe an hour of time on it, probably less. Starts up, gets up to pressure very quickly and auto shut off works as it should. No issues.

Here's a video of operation: https://vimeo.com/832751688?share=copy

$275 shipped in its original box, PPFF

Trades considered:
-700 cc bottle https://www.airgunnation.com/threads/looking-for-an-alsafe-700cc-bottle.1290441/post-1503880

-Airmarksman Anvil

Hi everyone,
This is my first post here and I want to add a reasonably priced pistol scope. Red dot has been great but I want to extend the range. I would appreciate any suggestions.

So while I was waiting for my Notos to ship I was on the PA website looking at reviews. Somebody mentioned that their notos had an issue with the bolt binding inside the reciever during the cocking cycle and causing serious wear, eventually causing it to become unusable. So after mine arrived I made a point to lube this area with silicone grease. Unfortunately that very thing started happening only a couple hundred shots in. It would bind to the point it wouldn’t cock without extreme force. I knew this would very quickly scuff the internal surfaces and lead to more severe wear. I considered returning it but decided to try remedying it first. So I took it apart and cleaned off the silicone grease and applied an extra tacky extreme pressure synthetic grease. This has completely eliminated the problem and the cocking cycle is smoother several hundred shots later. Unfortunately the silicone greese doesn’t have the correct lubing properties. Be cautious however that you don’t get the grease forward into the action where the orings are as it may damage them.

also I was tweeking the trigger. It can be made very light (single stage tho) but I found out this allows the gun to fire even with the safety engaged. So be cautious of that.

Quite possibly the most important and most over looked shooting accessory that is over looked. You guessed it! That accessory is the shooting bench. While we spend $1,000's on airguns, scopes, tanks, compressors and other accessories; we as shooters will never know the total capability of our equipment if we are not stable. In my quest for stability I have tried a great deal of options, but the Stukey Shooting Bench and Stool takes the cake for both portability and stability.

Complete like new, not a scratch on it, never been outside setup for sale and fully decked out to include the following:

Helix 6-24X50 MOA clean reticle w/neoprene cover, bikini caps, flip up caps, sunshade.
Warne one piece mount
Saber TRS rail
Saber gen 3 extended Arca trigger guard
DonnyFL Sumo
Saber tactical ambi cheek rest
Saber tactical adjustable cheek riser
Saber tactical butt stock
AirMarksman flat face trigger blade
Carbon fiber liner sleeve
Factory mag
Orion mag

ALL ORIGINAL PARTS WILL ALSO BE INCLUDED

Current tune is for 23 grain NSA slugs at 1,000 fps.

Around 4K retail value.

Price is $3,000 USD shipped CONUS.

PayPal FF, Zelle.

I’ve sold quite a few Impacts on here successfully with positive feedback.

DM here or text 630-618-8275

-Andrew

Vintage .20 caliber pellets for sale. Sold my last .20 rifle so time to find a home for the pellets

(SOLD) JSB Exact Diablo - Domed 500 Count - Quantity 11 available $14.99 each plus shipping (Weight approx. 13.7)

(SOLD)Beeman Field target Specials - Round Nose Match 200 Count - Quantity 20 available $7.99 each plus shipping (Weight approx. 11.2)

H&N -Hollow Point 200 Count - Quantity 1 available $6.99 plus shipping

Bought this K1 in Jan 2022 from NEA. Had issue with leaking seal under regulator gauge, replaced the seal and all was well - I thought. Shot a few rounds, aired it up and put away.
I get it out for a shooting session recently and it has zero pressure in it. Aired it up and shot a few rounds without issue. So, I don't know if there is a leak somewhere around the gauge still or what it's problem is but I have two of these and this one is bound for a new home. So, this rifle has had less than 2 mags worth shot through it, has a slight mark or two on the rail from mounting a scope, is not leaking at the moment but might start again, and apparently does not like me.

UPDATE: Damn thing is empty again, didn't hold air over 24 hrs. Price adjusted.

A friend of mine passed away and I will be listing some of his stuff in the near future. That prompted me to start thinning my own herd.

I have not posted a for sale ad here but have been in hobby for years and have mucho positive feedback on old yeller classifieds and on ebay. I have bought several things on AGN classifieds over the past year or so.

$1350 shipped, Paypal gift or add 3%, can also do Zelle. Not interested in trades.

DO NOT WASTE MY TIME WITH LOWBALL OFFERS.

Dana Daugherty
Dana in TN

Goodmorning Friday peeps I decided to destroy some crap by the dumpster this am

To my surprise the plasma TVs of the early 2000s were built like tank armor. (Unlike their LCD Counterparts) If it was a real bullet I’d believe the results would be different but still this 740fps 50 cal modified performance pistol punched this steel core spike round straight on with this tv facing front 25 yards away with the spike steel tip being bent almost 85 degrees.

Feel free to post your Friday shoots and ammo reviews on this general discussion

So I have a 177 Mav compact. I haven't adjusted the regs, so I don't know the first reg setting. I installed a digital manometer at the rear. When I shoot it stays at 82-84 bar. When I leave is over night it will get to 87 bar and stay there. Is this an acceptable number?

I know acceptable is dependent on purpose. I just want to get ahead of this in case its an issue since it is brand new.
Currently my compressor is down, so I can't waste too much air I have on checking the other reg. I hope to be back running Sunday.

Its currently sending JSB 10.34gr 920 fps from factory. From my limited shooting time its a good barrel with just the Crosman Heavies I've been feeding it mostly. (25 yards)

So I've been a member since 2021. In the past couple months I've made a point to be active on here.....waiting fir the opportunity to be able to make a (wts) post,ive told you have to be active for 10 days,you have to reply to others?...ive done this and nothing has changed....ive searched every single option on this site and still cannot figure out how to post in the member classifieds....can someone please help !?!?!?!

Hello everyone,
I have for sale my FX Crown MK II .177 caliber PCP air rifle along with other items for a package price of $3,000.00.

1) This package must be picked up at my home in Etoile, Texas.
2) Those of you that know me also know that everything I have is absolutely like brand new and well taken care of. All items have all of the original factory manuals, equipment, supplies, etc. along with the factory boxes.
3) I will not sell any item individually and sold as a complete package only.
4) Just send me an email and tell me what items you wish more photos of and I will send to you.
5) The quantity for each item is shown to the right of the description.


Please, if you have any questions about any of these items send me an email, it is much faster, and if you would prefer to talk on the phone I will send you my home number. . { wa5dx at yahoo dot com }

Thank you,
ThomasT

Bought this last year and never mounted it. Pretty cool adjustable mount. What you see is what you get, all the goodies that came with it new, which it basically is.

I have not posted a for sale ad here but have been in hobby for years and have mucho positive feedback on old yeller classifieds and on ebay.

$325 shipped, Paypal gift or add 3%

Dana Daugherty
Dana in TN

I have a 20 year old Shooting Chrony, I think it’s the alpha model. Currently I get an ERROR about 1 of every 4 shots Also the last 2 digits are almost illegible.

Could you please recommend me something to replace it?

My first priority would be that it is SMALL, easy to store. Then, if possible, that it is cheap & easy to get. I’m an old guy so for me simple is better... no fancy functions or phone app needed...

Thanks!!

Hi. My only air rifle is the Benjamin Maximus. As you know, its limit is about 2,000 psi and very easy to hand pump. FPS with 22 cal, 15.89 grain pellets is somewhere between 850 to 900 (I think).
Ok, so my question is, what are you gaining by going to a rifle such as the Gauntlet or Marauder that is more around 3,000 psi? The FPS on those rifles is similar to the Maximus in the same caliber.
Is it simply the ability to take more shots per full air load, or are these rifles actually more powerful in some way.
Please explain.
Thanks!

Part of my range set up are some two sided targets, cast iron skillets.

One side is iron. But is you turn around the stand, on the opposite side they are filled with modeling clay. For a different effect.