340 yards
13"x20" steel torso
280" of drop
64 gr dbhp griffin slugs doing 910fps

Both work though a reseal would never hurt. I’ve never opened them just shot them a bunch. Always kept with 3-4 pumps. Amazing how accurate these sweet ole guns shoot with JSBs.
Sold as seen in pics with levels, buttstock covers, Weaver KV 2+3/4x5 magnification scopes and mounts $325 shipped each.
Add a fixer BS or SS for additional $100. PayPal FnF only.
Trade for RAW barrel kits and AF mag, FX Crown 22/25 380mm and mag, JSR Mini 22/25 barrel kit and mag, NV scope, IR 24+ scope, RAW HMX stocks/chassis, Crown YJ/GRS/ST stock..
I’ve maintained these using MAC1 secret sauce I will include as well as 2 sealed JSB tins of ammo each gun.
*******Hold Down safety SOLD************
Thank you,
Keahi

Sending/lobbing, seriously lobbing them out there, 10 MILs of holdover, just for fun of course. I can sometimes see the pellets dropping down from the top of the objective in the scope.

just got a brk ghost hp 22 shot it a couple times with and without moderator then unscrewed the bottle and bled the air out to change gauges. Pulled the trigger and cocked maybe 5 times til it hit zero and then it wouldnt cock. the lever comes back about halfway and thats it. need help cant be much. thanks

So I'm trying to get my 12 year old daughter into shooting more, she loves it but loses interest quick. With that said do you all know any fun 1v1, solo shooting games. She is super competitive and I'm pretty sure that will get her going competing with me. I have the mini golf targets but that gets old quick after a few rounds.

Finally, the job is done! The Turkish Poppel have an amazing structure, and suits the old Feinwerbau very good I think. But the scope not so much, because of the narrow loading. But it is doable…
Some before and after pictures, and couldn’t resist putting in the Moskus picture hanging in my cabin.

I purchased a Dreamline Classic used from an AGN member sometime early last fall.

Recent pictures noticed it would leak down during storage.

I logged on to the FX website and inquired about sending it back for repair. Within fifteen minutes I had a reply. Long story short, to my surprise, they fixed it under warranty. Had it returned in less than three week. Terrific service. Exactly why I gave several FX rifles in my vault!

Thank you FX!

I’ve owned a ton of rifles over the years, and really liked a bunch of them, but this little gal is one of the most versatile, accurate and shoulders better than just about anything I’ve owned.

I can run redesign’s at 750ish , 18’s at 880 , hades over 900 and GTO’s over 1000 if need be, all with incredible accuracy at 30 yards. Having said that, I’ve got .30 and .357 rifles that fill my need for anything from deer, yotes, turkey and squirrels.

Where this rifle really shines is down low, she’s super adjustable and just as accurate at low speeds. With her weight, length, accuracy, mouse fart quiteness, incredible shot count and shouldering capabilities, she makes a perfect weapon for my falconry bird abatement job.

While most of my pigeon work is with birds of prey, I do have lot’s opportunities to use my air rifles when the job is too dangerous for the hawk. With this setup, I’m able to feed the pigeons to my hawk with no worries (lead poisoning).

My second need for a low powered rifle is my chicken coop (inside and out). The rats seem never ending. I literally can kill a couple per night, year around. With lead being toxic to poultry, again I’m able to take advantage of low speeds, superior accuracy and literally an almost silent rifle.

While the majority of all my pigeon and rat shooting takes place inside 30 yards, I did want to see what she was capable of out to 50 yards. I expected very little with 15 and 11gr pellets in the 685-690 fps range, but I was definitely WRONG. In the right conditions, I have no doubt I could make clean, accurate kills at 75 yards on pigeons.

What makes the rifle the most special, is she is literally the CHEAPEST pcp I’ve ever purchased since starting the hobby 15 years ago.

Behold- “Jolene”, the do it all, silent pester! Below is the 5 shot group at 50 this morning off a single bag (bipod was inside and I must have been lazy). I’m not going to add a picture of the 30 yard groups, as they are literally hole in hole.

Hello everyone,

I had a GREAT morning of shooting a half dozen paper targets with absolutely perfect weather conditions. However while shooting I began to think about how, we as target shooters, forget and don’t always take into consideration some HARD Factual Numbers. I’m not trying to go “geek” but need to have a good perspective of the accuracy of each shot so as to improve on my ability.

Let me explain with the attached target as an example:

Look at the top row, left to right, at number 4 target. When I shot this I said damn and then thought, OK it is not a dead center bullseye but really it is still a good shot. Here is how I was aiming at each target to adjust for my rifle and the scope, I was placing the small round dot of the reticle at the bottom-center of the “1" of the ten (10) in the bullseye. Yep that is how precise I was shooting this target. I brought the target in the house and used my digital calipers to actually measure the distance from the “aim point” ( bottom-center of “1" ) to the true center of the 10-Ring and as you can see it is ONLY .0355 of an inch. Man that is almost nothing, but that tiny bit compensates for my rifle and scope. Look at the rest of this target ( not to brag ) and see how many dead center ( or almost ) I shot on this card using that “aim point”. Now look at the first target on the last row and even though I did hit the 10-Ring ( barely ) it does count as a hit but I was very disappointed . Again I measured from the center of the POI to the center of the 10-Ring and it is only .1205 of an inch. Man that is ugly on this card but, had I been shooting at the head of a Squirrel at 25-yards, he would be Vulture candy right now .

Well what the heck is all my ranting and raven about, are we too demanding on our equipment and our ability? I guess it all lies with the individual shooter, in my own opinion I don’t think so. With that said it is important to try and keep everything in perspective.

Rifle: Brocock Commander XR .177
Pellet: JSB Exact Heavy 10.34gr
Distance: 25-yards
Weather: perfect

ThomasT

Got the Raw. 30 setup for ringing steel and these guys come out to eat. The Raw is so quite they just keep on eating. Tempting but they live for another day.

Selling my FX IMPACT M3 amazing rifle
Found my dream gun (THOMAS HPX .22) though and need money.

Asking $1900 with extras you see minus scope and rings .
Scope rings $300 extra

If you buy all ill pay shipping and insurance ....
Shipped USA only

text 513-748-7777
Jim

So this ain’t the first time a raccoon has stole my rat bait by untwisting it off it’s mount,but this is the first time one got stuck in it.This went on for about an hour before he got it off.Right when I was debating whether to put him out of his misery or leave him with a lesson that may starve him to death,he got it off so he got to return home after resting for a half hour from the battle.Poor bastard was all over the yard, fell in the pond and everything.
Video is a minute or two of if you can use a Saturday morning chuckle with your coffee.

Im looking to sell my s45 in order to get a new gun. Iv only shot this gun a couple times, less than 100 rounds through it and have kept it clean as can be for the last few months iv had it. I will throw in a good amount of approved ammo, two magazines, the magazine loader,, fill probe, the red dot , bottle clamp with lazer/flashlight foregrip, and soft case all for $1000 or looking for a fx wildcat or a decent compressor

Well decided on getting the CS3. Ordered it got it today. Took it out of the box everything looked good started on the fan fans run with no problem and push the start button nothing.... pressed the button again nothing....so I guess lost the compressor lottery on this one. I have a CS2 and the battery version of the CS2 both TANKS!!!! Just wanted something with the auto stop and pump a little longer to pump up the "beast" my Uragan King in 30cal. Trying to save on range time more shooting less pumping because the range closes at 4pm because the locals in area took the range to court they lost and won. They lost because time is shorter but won because they can remain open. Not really sure what happened if something happened during the travel here or the UPS driver playing football again if you know what I mean. I have sent them a email are there any other emails or ways to contact them??? I ordered directly from GX themselves. Thanks

I have a WAR Flex .22/.25/.357. The gun has a .22 24” unchoked TJ barrel, .25 17” .25 barrel and a .357 24” barrel. The .357 needs a oring groove machined in the probe to be functional. Comes with 1 mag in each caliber. Cobra Regulator with a Cothran valve. In the picture, it has a 700cc tank. That tank has been removed. It now has a 480cc tank. I can send you current pictures if you want. It has recently been resealed, cleaned and lubed. The gun comes with multiple orings for future rebuilds, a .22/.25 moderator and other extras as I can find them. Has a beautiful custom cerakote job in burnt bronze. Best is to call 509-993-9105 and we can discuss. I’d like to get $1000 plus shipping.

I been in the sport a long time, I get pellets my guns do not like or I just do not like shooting, It goes in the junk box,Bipods,Scope rings, scope levels Sometimes shipping and boxing up this stuff is more than it's worth, So when I sell something , I will look in my junk box and put it in the box I am shipping, Maybe I should not call it my junk box just my box I don't use, I alway or most the time leave instructions if you can't use it or you don't like it ,Pass it on , I am not that nice of a guy , I am just getting rid of my junk or stuff I don't use,
Don't ask me for some junk , Because I am not shipping nothing until I sell stuff, LOL.
Mike

Sold....

ARKEN EP5 5-25X56 34 MM MOA VPR. Scope and sunshade only,,, $400 paypal F/F shipped usps priority with tracking

I Just wanted to share 2 YouTube videos I made, documenting a challenge I took upon myself, to put to rest in my own mind, after researching for months on YouTube along with various PB websites, all the various ways, means, opinions, voodoo techniques and what-not-to-do’s, to see what would really happen if I just took a Brass Brush, Willy-Nilly, to my brand new FX .25 600mm Heavy Liner and just went crazy.

YMMV for sure. This is My experience. Take it as you may.

Flashed a little Ballistol in the Liner and went to work.

In and Out anyway what so ever, breach, leade, sideways, back and forth, no holding back, knowing that the worst case was it cost me $120 bucks shipped and I learned something that I could pass along.

Granted, using a .25 Brass Brush, I can only push one way, exit, and then pull back (a .22 brass brush in a .25 sometimes can offer a better fit and a back and forth cleaning due to the smaller diameter). Heck-Yea! I did it…Back and Forth and Back and Forth over and over for 100 strokes with that Brush. Ran some patches through it and then hit her up with a Mop and some JB Bore Paste for another 100 strokes!!! In and out the Crown and then the Leade, in and out, in and out. It was exhilarating!!!

I have no regrets and, a bit of confidence after “feeling” the difference from the first few strokes of the Brass, to the final laps of the Mop. It was so Smoooooooth!!!

The Video speaks for itself of the difference.

• Stage 1: Very impressed with the results.
• Stage 2: Pending and will post results.

Bore Scope does not lie. Enjoy the Videos.

Not the end for sure…

Next will be “The Test” with some NSA 29Gr Rd and others in my M3 @50 & 100.

Stay tuned!



Before:


After:

Quotation marks because it's not really a tune but more of a "let's crank it and see how high it'll go" type of situation. Almost 100 foot-pounds with 40 grain ZAN .217's. That's on par with Eley Tenex (.22lr match ammo, 40 gr @ 1040-1080 fps ). Not practical at all considering all of the 5 meters I have in my tiny student flat but lots of fun having essentially a rimfire with how strictly regulated firearms are here in the Netherlands.

Settings:

• 1st reg and 2nd reg @ 210 bar
• valve adjuster all the way out, about 1.5 turns back from where you can feel the knob starting to run off the thread
• hammer spring dialed back 3 clicks on the micro adjuster from where the trigger sear doesn't engage anymore

Using a slug kit and an 800mm barrel.

What's the most power you've gotten out of your M3?

So I just had knee surgery and I'm going to be off work for about 6-8 weeks so I ordered a few boxes of the 1250 cosman domes. Most of my guns shoot them really well and I am going to be going through them. Anyone have a good suggestion for something to keep them in,say a few hundred in each container. I sure this has been covered but if you search pellet you get a few million post lol.

accurate pellet and the most overlooked by newbies......know what, LPs are coming back,I know many will not know what a LP is,lets put it this way.like the .20 you know.
Lack of pellets,you can still get them, and if more people realized how good the .20 shoots more people would buy air guns that use them= thus more pellets for them; Heck they got the molds for them......maybe I shouldn't say this; truth be told when someone says the .20 is dead I think they're full of baloney.

Details:

• Bought this Air Arms MPR .177 last summer from the original owner.
• Other than installing an Altaros or Lane regulator, I couldn't find any indications of its use prior to me. Everything was perfect and felt new. This MPR has either been on my workbench or on the shooting bench since. There are a few small compression marks on the stock (shown in the photos).
• Due to the regulator, the rifle's manometer now displays the reg's pressure setting instead of the cylinder's pressure.
• Under the protective cap, there is a foster quick fill adapter.
• I may have the original box and manual and will update the listing with photos when found.
• I spent a few hours last September testing pellets and recording the strings. My memory nor notes recorded from that session tell me whether or not this string was a single or two fills, but I believe it was a 95-shot string that had a 4.4 standard deviation, 24 fps extreme spread with the JSB 8.4g 4.52 pellets at 779fps resulting in 11.3 fpe.

7-day inspection period. 100% satisfaction guaranteed. If you don't love it, return it.

$795. PayPal F&F or add 3%. Send any questions via PM, email, text, or phone call. Buyer pays shipping. Will be double-boxed and tightly packed. Scope, rings, and hamster riser are not included… however, everything has a price, right?

have two shoe box compressors one is chain drive the other belt both run and pump but not up to spec. 12 to 1500 or so 200.00 each shipped east of Ms.river add 25.00 west

NLA