Monstrum 4x12 - 44 AO rifle scope. New in box. Reduced - $75~

This is a great value with crisp optics at a bargain price. 1 inch diameter tube, 44 mm objective with 4–12 MIL Hash gradients. Nitrogen filled and is both fog and water resistant. Ideal for both air guns, and cartridge rifles. The aircraft grade 6061 aluminum construction and adjustable objective allows precise focusing.

The fit, finish and function are outstanding for the price. Includes flip up caps.

It is new and was never mounted.


In addition to the Monstrum scope, I am also selling a four pack of GAMO pellets and a 4500 PSI PCP compressor. Also need to sell a Diana Stormrider Gen 2 PCP, a Benjamin Cayden PCP. All of it new in box. Had to sell my place on acreage and move into town. I never got the chance to enjoy any of it.

New matte finish CF moderator. 177-25 caliber. Monocore design. 1/2-20 threads. 5.5" L x 1" diameter.

$40 shipped CONUS only
PayPal F&F or CASHAPP

FX Dreamlite .25 600mm

Second owner
Does not leak
O-rings replaced in AMP reg around 2021
Fx Power plenum
Comes with factory 250cc air tube (white gauge) and a lighter weight 220cc air tube (black gauge, installed)
Huma internal plenum, I never used it, came with 220cc tube
Huma Regulator gauge with better resolution
3 smaller Streamline mags, better with low scope rings
1 factory Dreamline mag
Homemade butt stock, better with low scope rings and Streamline mags
Factory butt stock
Fill probe
Huma 40/4 mod
Nearly full tin of 33.95 JSB
Misc 25g JSB, 20g H&N, Polymags
Factory box

I can remove the rubber grip gun tape, peels right off but makes picking up the gun much easier without a stock. If you are interested and don't want the grip tape. I can remove tape and send pics without it on.

Transfer port has been ported and pellet probe trimmed for better flow.
With 33.95 JSB's, hammer on "max" 939, 945, 944, 946 fps, app. 66 FPE
33.95 JSB ,hammer set at "B" 892, 888 fps for accuracy. It will shoot 25g too at lower hammer settings but I just stick with the heavies. It is FX accurate even at the higher FPS.
It will shoot the 20g H&N (included) at around 20 FPE if port and hammer turned to minimum to save air. These aren't JSB accurate but still fun to plink without using much air.

Only selling as I bought an FX Maverick

$800 shipped and double boxed with Huma. Or -$90 without the Huma mod, $710shipped

Is the printed moderators/silencers worth venturing into compared to aluminum/carbon fiber ones with alloys? Is it the pay once cry once sort of scenario? There are definitely some great printers and resins out there, but its a niche that I'm not familiar with.

I went back to the farm again this afternoon to do some shooting with my Impact MK2. While I was waiting for starlings/doves to return, I took some shots at my target box out at 50 yards with my Snowpeak M60B. I bought a new V9 bipod (Accutac knockoff) and was trying it out. It was working very well.

It was an overcast day with wind that was chilly to the bone. It was about 10 deg C, but felt like 5 deg C with the wind chill.
I started with the H&N Baracuda 15 (16gr) pellets and the group was decent in the wind.

I then hand loaded a NSA 17.5gr .217 slug and fired at the 50 yards box. It missed the bullseye high and right, which I knew it would happen because this gun haven't shot any NSA slugs yet. I loaded a second slug and aimed at the same bullseye. The POI was very close to the first shot. My eyes lit up! I did a quick adjustments to the elevation and windage on the new Discovery ED 4-20x52mm FFP scope. I was able to get on the bullseye with the 5th shot.

I was excited with the possibility. I quickly put up a new sheet of paper with two bullseye on it. The bullseyes were 20mm (0.787 in) in diameter.

I did the first 5 shots and the CTC was 15.32mm (0.60"). OMG, I couldn't believe what was happening. I have shot the Hades 16 gr pellets with great results, but this was incredible. I knew I could do better so I calmed myself with deep breathing and went on to the second bullseye.

I took my time and gently squeezed off these 5 shots. Remember this was in windy condition and these 17.5gr slugs cut thru the wind without much effort. The holes created with these 5 shots looked very small thru the scope view. I went and retrieved the paper immediately to have a closer look.

OMG, I knew it was less than 1/2" because the bullseye was only 0.6". I didn't have any tape measure so I used a dime and a AAA battery as a reference. When I got home, I confirmed it with my digital calliper. It was 8.74mm or 0.344" CTC.

It was shooting these NSA 17.5gr at 895 fps, about 31 ft.lb. This gun is definitely a "sleeper". I am very happy to have found the best projectile for this factory set PCP (Reg 145 bar with HS untouched from factory). To top it off, this PCP cost a lot less than my Impact MK2.

Ya, something magical happened to me today.

This may sound wierd ....... BUT:

First level Rifle with availability of change of calibers, plus chrony, plus automatic calculations, plus savings on time of tunning (of course the time of everyone cost different, irrespective than being limited on time, must valuable asset we all have is time).

Delta Wolf, being a pricey rifle, at the end is not so expensive .....

SOLD


Asking $1,800 shipped.

Does NOT include scope and rings or front weights that you see in some of the pics. I will remove those.

Selling my Skout Epoch .25 in 25”. It is in perfect , 9.5/10 condition. No scratches, dings, or issues of any kind. I just can’t shoot multiple rifles. Every time I get multiple, I have to sell one. Just keeping my Field Target rifle.

Includes all the factory stuff plus a few extras.

• Qty 3 - .25 25” barrels
• Factory super heavy duty pelican style case
• Factory accessories which include a set of hex wrenches, o-rings, charger, grip pads, valve wrench, bottle wrench, etc.
• Upgraded barrel lock
• Bag rider
• Pic rail on the front will stay if you want it
• $250 ARCA extended rail
• $75 Whisper moderator upgrade and original moderator
• $40 DonnyFl moderator adapter

Rifle loves shooting both 25gr and 34gr pellets. Extremely easy to adjust power by adjusting only the HP reg. No upgrades needed as it already has an adjustable cheek riser, adjustable butt pad, and extended bipod rail. I have added a pic rail and MLOK covers to make a bad rider for the rear as well.

Please let me know if you have any questions.

I ship fast and insured. I prefer PayPal F&F, but I do accept other methods as well depending on the user.

personal

I had a chance to install the freshly cut barrel and probe into my Ghost.
Since it was last tuned for .30 pellets, I turned the power wheel (hammer) down from 12->7.
I was so excited to see what it would do, I didnt bother breaking out the chrony.
I just loaded up some JSB redesigns and let it rip.
Below is the first pellets shot out at 78Y


I haven't tuned it or for that matter even leaded in the barrel yet. These are the first 8 shots at 75Y. Very promising! Already more accurate than the .30 factory barrel!
Those were shot from the .22 magazine I ordered from AoA also (not single shot loaded).

Heres what it looks like all put together.






I loaded a pellet with the barrel and probe installed and then removed the barrel to push the pellet back out using a nylon rod. Both the head and skirt were loaded into the rifling! Previous problem fixed. The factory .30 setup didnt load the pellet far enough to engage the rifling before.
I did notice the probe has some witness marks from contacting the rifling. I'll need to cut a small taper on the end to reduce the OD. I'll need to be careful not to take too much off as not to reduce the seating depth.


The new .22 magazine was installed and cycled just as you'd expect. No problems.


Over the next week, I'll work it in and tune it to see what kind of accuracy I can eek of of it, but Im happy so far.
I'll post follow up groups this weekend.
Thanks for lookin!

BRK Brocock has a wide range of rifles and pistols available ( obviously certain countries have different models to other countries). Can you think of what would be an award winning, head turning, show stopping new rifle/ pistol.
There must be something you’ve always wanted to see be produced by them let me hear about it

NLA

I recently purchased a used FX Wildcat Gen 1. Upon receiving it, I unboxed it and tested the cocking and trigger. Owning several Kalibrgun (original and II) and having owned a FX Royale, I am fairly used to cocking and de-cocking PCPs. After successfully cycling the gun twice, the gun no longer fully cocks. It feels like it simply hits a hard-stop just before you get to the point where it feels like the magazine would begin to index.

I have watched Ernest's Masterclass video that shows the re-assembly, and it does look like a finicky gun to correctly align.


The seller has graciously agreed to split the costs to ship it back to Utah Airguns, but before I commit to a giving the Wildcat round trip to Utah, I would like to see if there are any FX experts who could suggest any further troubleshooting steps that would be non-invasive.

I am a little new to the game! Been watching videos and ways to stiffen the 70mm barrel.
I have the tensioner kit and it all seems to be doing well. But it still allows movement to some degree.

Being a powder gun guy, I saw some older videos on a gentleman that was producing a stainless shroud. It apparently didn’t work well. Atleast as a sleeve.

i’m wondeing why Fx didn’t do the whole barrel in stainless and use liners. Making it thicker are it clears the supported mid section.

i guess their wrapping of the mandrel with carbon fiber is a easier process.

just thinking……….

Hello hw30 and r7 owners,
I'd like to mention my stock hw30 in .177 has over 6,500 pellets through it and has given me zero problems over the last 3 years of owning it. I noticed what looks to be a broken spring but have not opened it up yet.
My question is what spring should I order...?
I'd like a slightly slower velocity with a real smooth feel. I mostly own 10m rifles and enjoy the soft smooth shooting they give me.
I've heard of short stroking but I believe that is more on harder shooting models. My air rifles are for killing paper and bugs so I'm looking for a spring that will give me 550 - 600 something fps and a smooth sweet recoil.
What is your recommendations...?

Rich

Does anyone have any advice for the removal of the 4 square receiver pieces? I trimmed down an allan key but it was a royal pain in the butt to get them off. Thought I’d ask before attempting the 50s

Thanks

Vulcan 3 .25 500mm Lots of upgrades!

Over $150 in upgrades and over $150 in ammo

Huma Regulator installed ( original also included) $89.95
Talon Tunes heavy hammer spring installed $19.95
Factory de-pigner installed $39.95
2 Factory mags
Fill Probe
Sling
1/2 UNF adaptor
0DB Moderator
Barrel sleeve
Plastic bottle protector
Factory case

Also: FX 34 gn pellets Over 900 $65
FX 26 gn slugs 280 $40
Zans slugs over 500 $50

A couple of minor scratches as seen in the pics because it has been used in the woods. Shoots Great! Currently shooting the 34 grain about 900 fps.
The moderator adaptor leaves a little gap as seen in the pics, but works great and the barrel cover slides over it.

$1100 delivered, without pellets,
$1200 with the pellets and slugs included.

Pay Pay F&F or pay the 3.5 fee, or Zelle

Kevin
Knoxville, TN

What could be the reason wye the Avenge-x POI shifts from left to right with a decrease in bottel pressure and wye it has shifted avter an refill

Although the few silica beads I put inside a small filter is still blue after I filled 2 guns, one 210cc from 120 to 200 the other a 320cc from 150 to 300. The purge valve didn't let out even one drop of water. Since I'm a man of science and believe in conversation of mass. All the water molecules in the air I pumped into the guns have to be accounted for. Because I didn't see any water from the purge and the silica beads are still orange, I only can conclude that the water must be inside the guns! The only rational solution if to install a pre or post water filter or both. I chose a pre-filter because I mostly fill guns and don't want to waste time filling a large post filter. My setup is the front end of what I was using to source the air into my motorized hand pump.

Oil less air compressor -> regulator 80 PSI -> oil dirt filter -> large silica bead filter (> 1QT) -> regulator 1/2 PSI -> input port of the CS4.

Pressurizing the air before the very large silica filter helps trap the water faster and more completely, then regulating it to only 1/2 will not significantly stress the CS4. If may swap out my 0-15 PSI gauge to a gauge that reads vacuum to low pressure like +-5 psi if I can find one cheap.

First time in a while. Retrieved these and had 12-15 that cats beat me to or I could not retrieve. Also killed 3 starlings that fell on the barn roof that I couldn't get. Killed these in about 2 hours.

This P-rod shoots lights out. Also includes (4) magazines.

It is tuned down to 612 fps avg for 32 shots per fill with JSB 15.89’s for barn pesting. Has the Hill Matched Pistol Parts Kit installed ($135 value), stock hammer with the Hill Peek delrin striker. Shot string below is from 3000psi to 2000psi and then starts dropping off due to the light tune and heavier Hill valve spring, which also prevents hammer bounce for better air efficiency. Still has three turns left on the hammer spring for more power. Consistently getting four mags per fill with a 19fps spread with this tune. Kills squirrels, no problem with good shot placement, which is very easy to do with this little tack driver. I also have the Crosman skeleton stock.

New Prices:
Gun $369
(3) extra magazines, $45 (4) total
Hill Matched Pistol Parts Kit $135
Peek striker $23
UTG pic/sling stud rail. $15
Bushnell Trophy Red Dot $100
DonnyFL M14 X 1.25 adapter custom threaded by my gunsmith ($75 labor) to accommodate the affixed AGT small moderator. ($100) .290 exit bore diameter.
*Original shroud end cap and short 1/2X20 adapter will be included.
*Over $900 invested, plus shipping!

The barrel band has been tapped with 10/32 machine threads and a machine threaded sling stud installed through the existing fore-end mounting hole and into the barrel band for more support. No extra holes drilled in the fore end. The front pic adapter is supported by the sling stud, not the plastic for-end.

Holds air indefinitely and is a tack driver with the JSB 15.89 pellets. Target pictures below are two, full magazine (8 shot) groups with current tune described above and in the chrony pic below. Very consistent accuracy and fps for a non-regulated pistol. Groups were shot at 50yds using 4-16x44 glass. Shoots CPD 14.3’s excellent also.

$450 for gun with affixed moderator and red dot. Due to new classifieds rules, moderator must be purchased as part of this package, as I would not be able to sell it separately. This thing is literally mouse fart quiet with the mod.

$400 minus the red dot/rings.

*Original box & papers from Crosman.*
*Crosman test card dated 2/14/23.
*Original valve cap, valve spring, hammer spring, steel striker and gauge block are included if you wanted to put it back to stock, although I don’t know why anyone would.
*Hill light hammer ($48.98) also included should you in the future choose a regulated application.
*Short 1/2x20 adapter and factory shroud end cap are also included.

I’m taking a huge hit on this so prices are firm and include free shipping to the lower 48.

If you choose to take the red dot, it will be sighted in at 20yds, and ready to shoot out of the box. I’ll even throw in what I have left of the JSB 15.89’s (2/3 500ct tin)

***See Bushnell trophy red dot sight specs in the pictures below. Will not sell the red dot sight before the gun sells.***

If you want it tuned higher, I can do that before I ship it. But realize that the shot count will be less. I will provide a full-fill shot string & target groups, using the red dot at 20yds to the buyer if he/she chooses a higher powered tune.

PP FF, Cashier’s check from bank or
USPS MO

Thanks for looking and bearing with my rambling! I feel the buyer is entitled to as much information as to make an informed purchase.

Check my feedback. Buy with confidence!


^Two shots did not read.^



^Breeze picked up for the last three on the top group.


^Minus the one flier. That one was on me^

I spent over two hours shooting my new Cometa 100 .177 rifle today, What a bargain rifle the 100 is. The sights and trigger are super on such a inexpensive rifle. The only one similar that barley beats it is the HW30S rifles. If you are looking for a low cost quality starter rifle then this is an ideal choice. It was 0nly 50 out today and with a portable propane heater I sure enjoyed the afternoon becoming friends with my Cometa 100. Charles

I am potentially about to get some new glass for 1 of my rifles, or new rifle, and there are a few scopes out there that I have my eye on. Not going to bring names to light just yet, as I am trying to determine cost over return. To name a few of the ones I already have are as follows and are decent entry to mid level optics:

1. Arken
2. Athlon
2. Blackhound
4. Monstrum
5. Vortex

I'm really thinking about getting into Teir 1 territory but so far am unsure.

Just wanted to know what everyone else might be running on their PCP Rifles so as to help me to guage my next purchase. Thanx for the read guys and I look forward to seeing what everyone else is running too.

Selling my Athlon Midas Tac HD . BNIB never mounted.includes sunshade. Scope cap and throw lever
APLR4 FFP reticle 6x24x50
350.00 plus shipping

I thought this used to be a thing... I see free shipping at AoA (that's good!) and the pellet shop is having one as well (Yeah! ) But nobody else? I guess the excitement of presidents day wore off a few years back. lol Not a rant, jut an observation.

A really nice Aircuda. These airguns are great entry level PCP's. Accurate, very attractive quality wooden stock, and regulated. Asking 350.00 for this one including shipping to CONUS . Call/text Ron 714-296-7489