I was just looking for some .22 pellets on the Bass Pro and it says the are manufactured by Hatsan.
Only place I've seen where it say that.

Hi y'all
I just finished rebuilding the seals in a sweet old Daisy 880, shes shooting with some power now!
Only thing is, terribly innacurate!
Shoots very, very high.
Anyway, I was reading you can epoxy the barrel, as well wrap the top of barrel in electrical tape to fit snugger inside the shroud.

Question;

Where would one apply said epoxy to the barrel?
Does anyone have a photo or can anyone draw a red arrow on a photo? lol..

Thanks in advance. I really appreciate any help bringing this ol' American made Daisy back to zero

Selling it with the fx case.

The maverick holds air and has no mechanical problems.

I would also be interested in a huben for a trade.

Comes with hard case looking to get 1,100

This is a Rapid Air Weapons (not Worx) HM1000X LRT in .30 cal (serial number HM1890). Asking $1295. Will ship in hard case to the CONUS only. Scope/Rings not included. Comes with 2 factory magazines, O-rings, biathlon side lever, single pellet tray, and fill connector.

Located in Conway, AR in case anyone wants to meet locally.

I’m sorry for the THIRD post of this air rifle, but here goes lucky number 3….
Custom cerakoted .22 RTI Prophet performance 2
Package comes with .177 LW barrel conversion kit, with shroud, end cap, and probe, carbon fiber bipod, Element helix 4-16 MOA, tacticam, rail extender, lots of mags and lots of ammo. It loves .217 knock outs at around 940.

Also posted on AGW

Asking $1100 shipped.

Living in a condo I no longer have my shop bench and very limited space so you make do with what you have!

Hello my AGN expert friends.

I need your advice to start or check my Ghost HP .22.

when I shoot I feel air go out ( I don’t know exactly where) but is under de shroud, the tank, reg adjustment in the front.

When I received the rifle the reg setting are 160bar some like that and then I down to 115~120 bar is only that I moved on it .

Is normal ?? I think isn’t, the question is … where can I check for repair this little issue, the rifle still shooting hard and accurate like it should

Thanks for read and reply !

Has anyone seen this on any Weihrauch before? I just bought this .177 HW30S in Canada. It’s S/N suggests 2017 year manufactured. The gun was pirchased as new. It is shooting incredibly well out of the box. I just have no idea what that inscription might mean. see pic of the inscription, and 5 shot groups 2nd time out at 25 yards. I mounted a Hawke 2-7x32mm Vantage AO, Sportsmatch 2 piece 1” 11mm dovetail. Thanks for any comments!

This is a "Spooky" 17 Caliber Carbon Fiber moderator. The internals are gyroid printed PETG.
This moderator performs best at muzzle energies between 15 and 40 foot pounds.

$45.00 to your door.

Specs:
Length: 100mm (~4 in)
Diameter: 24mm (~1 in)
Weight: 1.15 oz (33 grams)
1/2 x 20 UNF stainless helicoil




Audio was recorded of the bare rifle and the rifle with the moderator.
Here is that sound sample repeated three times.

The microphone is about ten feet further from the bullet trap than it is from the rifle muzzle. The sound of the pellet striking the trap is much louder than the rifle.

Analysis in "Audacity" shows that the net reduction is 11 decibels. That is a net reduction in detectable range of about 350%.

This chart explains that claim:

SOLD PENDING FUNDS. I have an Airmaks Krait X .25 for sale or trade in excellent condition. It has been upgraded to a Huma Reg, no creep, looking for a bench rest rifle, Panthera, Dynamic, Raw hmx, other quality rifles as well.
Any additional pics available upon request.

Just as stated above, this is a custom cerakoted prophet performance 2
It is set up to shoot .217 knock outs at 940 right now with the 600mm RBP barrel
What it comes with:
177 LW barrel with probe, shroud and end cap, Ammo for days, the tin with the polymag sticker has 3.5 tins of .177 polymags, 4 tins of .177 knock outs-2 10 grain, 2 13 grain, and partial boxes of NSA 20.2 and 12.5, 2.5 tins of .217s, a carbon fiber bipod, 4-16 element helix with no limit rings, 4 Orion 22 mags and a single shot loader, and two .177 magazines, a 1350 impulse air moderator with cover, tacticam video camera and a brush hog bottle cover.
Asking $1300 for the lot, or best offer
Sorry, no trades at this time.
Posted on AGW as well

If you have any questions or need more please feel free to message me, or text me for faster response
o-5 five six, niner

Selling an Artemis PP750 .22CAL. multi shot. Included 4 magazines(2 factory & 2 Carms), set of wood grips, extra o-rings, LDC adapter, Scope rail extension, Huma Regulator. Asking $250 shipped. Accept PayPal friends and family or USPS m.o.

Bought it from a member on here. Shot it twice and i just don't have any time for it anymore. Comes with the UTG scope that is on there. Small crack on side but nothing that effects performance.

Up for sale are some miscellaneous air gun parts. All prices are for the item only. Shipping will be additional and I will combine shipping on items if feasible.

2 x complete Rat Works aluminum HW100 cylinder 340mm OAL, like new condition $185 $170 each 1 sold to blackdiesel

1 x Rat Works aluminum cylinder for HW100, 340 OAL, no end pieces, just the tube, like new condition $125

1 x 600mm .177 HW100 threaded barrel $145 SOLD TO DrPutz

1 x 410mm .22 HW100 threaded barrel $115

1 x FX bottle valve $40 (I have been told by various members that these will not work on the newer FX rifles. I can provide more pictures if interested.)

1 x Weihrauch .22 single shot loader for HW100 $40

1 x Altaros .15L aluminum cylinder for AA or CZ S200 rifle and variants, never used $70

1 x cylinder end removal tool with two pins for AA or CZ S200 rifle and variants $20

1 x Rowan Engineering Air Arms TX200 Cocking Lever Grip, silver $30 SOLD

1 x Custom Air Seals gas ram for Gamo Accu, new never used $60

1 x Weihrauch HW100 synthetic black stock $225

1 x ARH Air Arms TX200, never used, cocking shoe $30 Sold to SilverStreak

Prices listed above are for just the part. Shipping and insurance is additional. Payment will be via USPS money order, Zelle or PayPal. If you elect to pay via goods and services please add the fees too. Continental U.S. only. In case my pricing is way off, I will entertain reasonable offers. Low ball offers will be ignored.

Thanks,

Taso

……Target practice

JTS Airacuda Max shooting 16gr JTS pellets and getting an honest 1/2 inch group at 75 yds.How the heck can they do it?

NLA

I was playing around this weekend and did some thinking...when is the last time I shot an airgun not a GK1.

It's been a bit...I looked at the Panthera a couple weeks ago. De-cased it and wiped it down...thought about shooting it...grabbed a GK1 instead...manically laughed as I emptied a whole magazine into a piece of steel at 50y. Yesterday, wanted to shoot the kyl I have at 35y...grabbed a GK1 that I threw an immersive optics on instead and had way too much fun. Then since the sun was hitting the kyl, pulled out the thermal GK1 and plinked away.

Yeah...this air 'pistol' has ruined other airguns for me...

I know I'm not the only person this PCP has ruined

Hello AGN'ers!

I recently fell into a few oldish Sheridan, 5mm pumpers that needed some work. They are easy enough to work on and fix via the available reseal kits from a few vendors.
However, those kits seem to be expensive (± $30 each) for what is included: a couple of springs, a couple of small gaskets, a flat piece of plastic called a check valve, new poppet and a new air tube pump seal.
I did a search for some of these parts on the McMaster Carr site and was not able to find the parts there, likely because I'm unsure of what exactly they are called/named.
Have any of you tried of found another way to buy a Make yer Own reseal kit for these Sheridan's please? They must be available somewhere, how else do these vendors acquire them to sell?

Mike

Hi all, would like to introduce myself here. A 43yo gun enthusiast here, fortunately living in a very safe and peaceful country in South East Asia (Indonesia) so gun ownership is highly regulated here. Firearm/powder burner mandates 6 months waiting period with 0.32 being the maximum caliber allowed and for airgun .177 being the most common with .22 the max allowed.

I have some tough rats and predatory lizards constantly roaming my farm at night and I just bought an FX M3 to handle my pests problem (just an excuse really). It’s a 700mm sniper spec with plenum and power block dumbed down to .177 with dual port and tensioned barrel. Very keen to learn into detail about tuning the riffle and I purposedly chose an M3 because I am a tinkerer by nature. Hope I can learn and contribute something here!!

Cheers!!

Uwiik

This was the base model about 8 years ago when I bought it. Doesn't talk with your phone, comes with a battery. I used 3 or 4 times a year to check on speeds to use for my Chairgun Pro ap. It works but is sensitive to the right amount of light. Selling because my brother just gave me a Garmin Xero for my Bday. $50.00 including shipping CONUSA PayPal F&F only.

Can anyone please tell me if there is a company or a custom builder who would be willing to make a big bore in caliber .72 or .95. I know all about AEA but I am looking for something American made.