I have sold my last 22 cal airgun and have a large pile of pellets to sell over 8000 to be exact
would like to sell as one if it doesn’t sell as one quickly ill split it up but will not be as cheap
H&N Slug HP .218 21 gr. 2 sealed 1 open total count 265
H&N barracuda 18.5 gr open count 167
H&N Barracuda 15.89 gr 3 sealed 1 open total count 790
daisy 22 pointed 1 full count 250
gamo magnum 15.43 gr 1 full count 250
Benjamin discovery 14.3 gr 2 full 1 open total count 1140
JSB exact jumbo diablo 15.89 gr 2 sealed 1 open total count 1315
JSB exact jumbo heavy diablo 18.13 gr 4 full cans total count 2000
JSB Hades diablo 15.89 gr 3 full 1 open total count 1860
From Pyramid air this is well over $275 value of pellets
ill let these go $235 dollars shipped
Thanks

This is a used ( not new ) has scratches and signs of wear all over but nothing to terrible imho lol. just look at the pics. Functions as it should and holds air. As you can see the older guage near the bottle end in the pic is not accurate so I just used the one on my compressor when filling. If this interest you here are the pics.



775.00 shipped
I will accept a USPS Money Order and will ship conus via usps. Item will ship immediately after funds have cleared. Any questions pm me and if needed I am happy to chat on the phone,

Thank you for your time ((((tire kickers you are not interested in this!!! hahaha!!!))))
Have a wonderful Day.
Scott

So I had to see what all the hype was about. A lot of people are raving about the new umarex notos. So by chance I just happened to see one in a sporting goods catalog that came with something else I ordered. Well doom on me and having the credit to buy it so I did. I have to say umarex really has a good product with this little thing. I threw a scope on it and did some quick sighting in this evening and the little regulator was consistent between 819 and 821 feet per second. And yes the little rascal is very accurate. So I'm looking forward to breaking this one in quite quickly. And yes I would definitely recommend it it is an absolute fun little gun.

Hi guys (and gals)!

Has anyone glass bedded their PCP? What kind of experiences have you had?

I finally glass bedded my Hatsan Flash Wood and I have been really happy with it. Don't know if the accuracy has increased that significantly from the glass bedding or if I have just found the right speed for the pellets to be shot at. Have a look at my journey on the glass bedding on the following vide and give your feedback!


Hope you all enjoy the video.

Anyone try these inexpensive chronographs that are $35? I'm not planning on tuning very often. I just need to tune for slugs. I've seen some youtube videos and a few positive post. Just wondering if anyone has compared one to a more expensive chronograph. Are they accurate, and consistant? Looks like there not going to be the most durable for I wont be using it very much. I already have a chosen pellet I just need to figure out what slugs it likes.

So my YH arrived today. I kind of expected it to come with oil but no.
From reading her at AN I'm leaning towards the Seco500.
Manual of course does not mention break in and says 50 hours for first oil change. Sounds like many change their oil the first time at an hour or less run time. What to use for break in oil?
I think I read @12oz for fill (?)

The AOA used section has been responsible for wearing the numbers off my credit card lately.

I called them morning to ask about the FX Royal 400 FT they have listed on the used section. I said it is confusing me because I can’t find anything about it online with that chassis. Sales guy said yeah, it confused him also and asked I believe the sales manager.

He said yes, there is nothing online about them because they only made ten.

So I either bought a rare rifle or a marketing failure.

Now the wait for the brown truck.

I will have to see when I get it if it has a regulator. If not I will add one. Anyone have any input on it. I see Huma makes a drop in. Alstros makes one the goes between the bottle and frame.

Up For Grabs

FX Crown MKII .22 cal, 600mm, with a Gorgeous Walnut Stock that has an adjustable cheek piece.

Gun is in Excellent Condition

Whats Included:
Gun itself
1 x side shot 18 round mag.
Lower Picatinny Rail Installed
Hard Case (Plano)
FX Manual
Chronograph sheet from today

Not included is the Scope, Scope Rings, or Bi-pod.

As you will see from the Chronograph and the Target pics this is a Shooter!!

Gun is dialed in, the chronograph numbers are with the JSB 18.13 pellets, The target was shot with those same pellets.

No Cherry-Picking BS, this gun is that good.

It pains me to no end to let this gun go, but due to an unfortunate circumstance i must do so.

Price is $1550.00 Shipped within the Lower 48
Payment via Paypal, or i can do CC over the phone.

It will ship UPS, Signature Required, and Insured


















View attachment 339405

Jessica the Iguana Solutions huntress revealed she’s using this combo on her last video.
Anybody using it?
How do you tune for this?
Presently favoring 15gr JSB at 700fps
Thanks

No special reason for asking, just that I haven’t seen any posts from him for almost 2 months. He was a regular poster here and often had interesting things to say.

Registration and Event details and hyperlinks have been added to our Calendar!

Hope to see you there!

Would this work? I have a Hatsan spark compressor and I added a Tuxing large filter to it. The problem is that by the time it fills up the filter to pressure and starts to fill the gun it is close to its max temp so I have to shut it down and wait. I'm thinking to add a shut off valve to both ends of the filter so that I can shut them and keep the filter at pressure while I bleed the line to the gun and compressor so that I can disconnect them. I found a small filter with a built in bleeder that I can put on the line going to the gun to bleed that line and I can bleed the compressor with its built in bleeder but I need two shut off valves, one on each end of the filter. Does anyone know where to find them? I guess it would also be nice to have a gauge that shows the pressure in the filter.

Up for sale is an FX Crown MKI in 177. This rifle loves the JSB 13.43 and shoots right at 805 so you are under the 20 foot pounds for Field Target. There are a couple of small marks on the stock that I photographed.

You will also get 2 factory FX 177 magazines (1 is old school aluminum) , Carm flip out single shot loader, the Koi moderator, new style FX hammer spring power wheel, and a tin of the 13.43 JSB's.

The scope, bipod, and rings are not included.

$1,100.00 shipped (Alaska and Hawaii not included in shipped price) PayPal F&F or you pay the fees. No trades.



First target is the JSB 13.43 RMS at 50 yards and the second target is the 10.3's at 50 yards

Tony P.

i had a 1377 35 years ago so of course i need to make a real slick 1 now except in 22. seems the steal breach is mandatory and the rear sight that cost more than the 1322. the grip and pump handle is super cool , 3d printed grip/foregrip actually feels really nice. mines lefty but they come in righty for you slow guys. i spoke with the master mac1, seems more power only works with a longer barrel. mine is 490 with 13.43 jsb. if i can get same power with less pumps then i will add flat top stuff

1st 2 shots after sight in @ 12 yards



5 shots

I love a springer with a peep sight. If you have never tried it, you really should. After all, most springers are not target guns. Not like a PCP. The majority of shooting takes place less than 30 yards. The peep keeps the springer balanced, small and light. Don’t get me wrong, I like scopes also. But enjoy shooting springers with peeps even more so.
Show us your “Peepers”!

Fun factor... What's the next gun on the list to buy for the fun factor? (All in .22 or .25)
I'm looking at :
Notos $250
Jts Airacuda max $420
Kral punch breaker silent $350
Beeman 1358 underlever $250
Invest $500 into my 1377 (lol jk)

I was looking for something that I didn't necessarily have to bench all the time like my gauntlet. I think I would like the bullpup style. All the above aside from the Airacuda max fit that. The max is in there just because it seems like a great gun for the money and I'd like to get a .25

Backyard friendly is a plus. I do have a .177/.22 Donny tatsu that can be added.

What would you get and why? Thanks for helping me make another bad decision

National 50 has had their match dates posted for quite some time.

Today Pyramid announced their Pyramid Air Cup is scheduled on the same date as N50 Nationals. It’s unfortunate that Pyramid can’t work with N50 and NOT compete against them.

Does anyone out there in the states make and sell a 1/4-20 plate adapter for the bottom of the FX Chronograph? I can't seem to find any in the states, just the u.k. , please let me know, thanks.
Mike

I believe I have identified an issue with my field target shooting. I was at the range today checking my dope since I recently reduced velocity a tiny bit. Nice warm day with no wind.
I was shooting the HW97 at 50 yards, seated and off the knee (WFTF style).

Here are my first 5 shots, checking the clicks and windage. Ignore the high shot, shooter error.

I'll take 4 shots touching at 50 yards from a springer any day.

Then I checked the 10 yard clicks. No issues.

Everything looked good with the dope, so I decided to shoot some more 50 yard shots. The standard targets at the club have a little blank circle in the upper middle part of the target that measures about an inch across. So I decided to see how many times I could hit the circle in a row. One. One is how many times.



Out of 8 shots, I had one clean shot in the circle. Between these two targets, I didn't get up, change pellets, get religion, lose religion, nothing. No changes. Same grip pressure, same level alignment. I didn't even get interrupted in the middle of shooting by a range master wanting to talk about Biden, motorcycles or the Gamo he used to have that would kill deer at 200 yards (happens more often than you would think).

The only logical conclusion I can come up with is that I apparently can't hit a circle. This explains a lot.

When I paint targets for the next match, I'll be drawing a little cross hair on every paddle. I'll report back after I clean the course at the next match.

Jeff, if you are reading this, I'm not really going to Sharpie a cross hair on every paddle.





Is Jeff gone? Because I am totally going to put a crosshair on every paddle in our target inventory. I'll say it's for the kids or the new shooters or something, but it's not for them. It's for me.

In all honesty, I think what happened is my old nemesis: crosshair fixation. I don't know if this is a real thing that other people struggle with, but I have to remind myself to look at the target not the crosshair. It's easy to focus on the target when I am aiming at the intersection of two fine, red lines. But when looking at a blank white circle (or a bright yellow kill zone), I don't have anything to focus on and my eyes get drawn to the crosshairs. I'm going to put a sticker on top of my turret that has a reticle inside a red circle and slash to try to remind myself to not fall into this trap.

This has been this week's episode of "Why does Scott suck". Join us next week, when we will discuss the merits of switching scopes/pellets/guns the night before a match.

About an hour ago FedX delivered the Altraros. Boy was I excited! OOPS... unit problem.... pressure setting gauge broken at it's black housing and the clear plastic top with adj. screw, laying in the booster units bottom with white wire pulled from the crimp connector. I've sent them this info.,too soon to hear back from them but I think they will send a new gauge. The unit is nicely fitted. Delivery was fast even thou FedX had "Operational Delay" of two days. More to come.

Lately, I've been itching to get a new springer. I'm trying to decide which one to get. I want a Walther LGV of any caliber. Here is what I have at the moment:

I scored a 177 LGV which should arrive on Thursday.



Springers:
177 Caliber
RWS Diana 56 TH
Walther LGU Master Pro
HW77 KT
HW97K Blue Laminate
Beeman RX2
Air Arms TX200

22 Caliber
RWS D54 Air king T06 (D56 TH Stock)
RWS D54 Air King T06 (Red Laminate Pro stock)
RWS D54 Air king T05
RWS D350
RWS D460
Beeman HW97k KT stock
Walther LGU Master Pro

25 Caliber:
RWS D56 TH
HW97K KT stock
Webley Patriot UK version
HW 90

I’m looking to get my first pcp rifle. Wanting to do plinking regularly out to 50 yards with occasional 100 yard days. Some squirrel hunting. Would like to get a .25 cal. Regulated, not picky about cocking mechanism. Not to concerned about how noisy it is but obviously don’t want it sounding like an actual.22 or anything. Really trying to decide between a gauntlet 2 or the avenger. I’m ok learning to work on the rifle as long as it’s things I can do myself. I don’t wanna have to send it off to someone to get work done. I had pretty much decided on the g2 because of the power and tbh I love the way it looks and it has the adjustable cheek piece but I saw a YouTube video by 1 guy pretty much trashing it and it made me nervous about some of the issues he brought up. I’m open to other guns maybe up to the 500 dollar mark. I know I’ll get suggested the maurader but tbh that rifle just don’t do it for me and as silly as it may sound I’m someone that even if it’s a great rifle if I don’t like looking at it I probably ain’t gonna wanna mess with it that much. I plan to by my own compresser to fill the gun so I’m not restricted to options using a hand pump or anything like that. Once I select a gun I’ll start looking at scopes and other attachments. Also I’m wanting to buy new not off the classifieds. I’m sure everyone’s honest sellers and everything but I’ve bought used bows in the past and been dissatisfied with equipment that wasn’t as advertised before. I tried giving as much info as I could sorry for the long post. If I missed anything that needs to be known for a good recommendation just ask

Very lightly used kestrel 2500 weather meter. Everything in perfect working order just moved up to a different model and won’t be needing two. $100 shipped OBO

Front picatinny is now removable… Which I thinks is an improvement.