I know we all use moisture filters between our compressors and either guns or tanks. I was wondering if anyone also uses a filter between their tank and gun? Once your tank air cools down any moisture formed from that, the secondary filtering should keep that out of the guns. I can't recall anyone discussing this.

2 x Gamo knock down targets
1 is used and 1 is unused
2 x Crosmann reset targets
1 x Miltiple reset target
1 x KNINE Adjustable Target Stand
( Can also adjust for smaller or larger targets)

$75 Shipped for the lot
Text 806 566 7190

First off... a quick shout out to this community as it helped my son and I pick up an Air Venturi Avenger. Overall we're impressed with the build quality given the price.

Dialing in the optics today, we ran out of height adjustment by a few ticks. I noticed one of the rear rail screws a bit lose, so I pulled both rails to inspect. Can someone help me identify what these 5 screws are for? Shimming the rails? The front screw (4) on the rear rail is slightly proud of the aluminum cast.

Before I jump the gun and adjust them, I wanted to get some info on their purpose.

The OKCGC AirHead Group had their July N50 Match. It turned out to be a really nice day overall. Sure the heat was on the high side but that’s Oklahoma in July!! 20 shooters came out and man were we glad to see all of them! We had two matches which gave us 26 entries. Confusing, no not really. We had 13 shoot on match #1. For match #2, 7 of those guys shot in match #2. The 6 that that waited for the second match shot with those 7 bringing the total entries to 26! 7+6=13 shooters in match #2. 13 in match #1. Ok now my head hurts lol.
I will let the scores and photos show Y’all the match!
Thank you to everyone that helps to put this event on and the shooters for supporting it, we appreciate it so much!! Thank you Tony, Don and John for helping score!

Bundle any airgun totaling $1,000 or more with a Guppy Air Tank and get $200 off your Guppy tank instantly! Don't miss the exclusive limited-time offer to enhance your airgun setup and shoot with confidence!
Use "Guppy200" in checkout!

Sorting these new to me AEA Center Punch pellets is getting pretty boring. Has anyone determined where they are made? Who is making them for AEA?

We have a groundhog problem at work. Took this one with a Umarex Gauntlet 2 SL .25 with a Sightmark Wraith 4K max.

What do you think of GAMO CF-X ROYAL?

I saw some bad reviews online that it starts to leak grease and do not shout good after a while

Mornin' AirGunners,
I am a self confessed lover of Taipans. I've tried others over the years, and always end up favoring my Veterans.
Any Taipan owners that have bought an Airmaks Krait and can share their thoughts on how they compare?
I've gotten used to the rear cocking on the Taipans; no longer bothers me; because their accuracy, triggers, anti double feed, etc, etc, just wins me over time and again.

Just that the specs on the Krait look pretty good on paper..

Thanks,
Terry

Located a 2010 (purchased new) coltri sub compressor with a Honda gas engine and approximately 300 hours on it. Not knowing much about these things is it worth 1200 ?? Thanks guys.

I m think of buying my first air gun but I am not sure which one to get a break barrel Norica Spider GRS or a second hand under leaver HW77.
The norica is cheaper and more powerful but the HW77 is more my style.

I will be using it mainly for hunting which one do you recommend?

Sorry if this has been discussed before., so I'll make it quick.
I see videos where tuners say, for slugs, leave the valve all the way open with a slight turn in, (but basically it's wide open).
If you're wanting to zero in on a particular velocity and are maybe 5-10 fps high, would you dial in the Valve knob until you hit the desired speed or would you leave it alone and back off the HST a bit?
Easy enough to try myself really, but wanted an opinion
Thanks.....

Hi Friends,

Up for sale:

Make: FX
MODEL: IMPACT
VERSION: M3 SNIPER
CALIBER: .22 cal and .30 barrel kit
CONDITION: Used, like new!
PRICE: $1700.00 SHIPPED TO LOWER 48!
NOT TRADES AT THIS TIME
CONTACT: [email protected]



Description:
LIKE NEW in the box .22 cal FX Impact MK3 with all standard included accessories. What you see in the pic is what you get.
Also included, .30 caliber barrel kit 700 mm with mag, .30 cal probe. FX No Limit Rings included.
Price includes shipping anywhere in the lower 48 USA states.
If you have any questions please use the email provided.
Email me with your phone number if you would like a call back [email protected]



Thank you!

Possible trades? $1300 obo I bought this from a member here earlier this year,I've got an impact recently so its not used as much. Wrapped cf tank and shroud for extr protection Tuned to shoot zan pellets or Fx hybrids accurately. Extremely pleasant to shoot over 100 Ftlbs.

Adjustable reg set at 160 bar
600 mm barrel .30 cal
Hawke scope 3 9.
30. Cal Odb 160s moderator
2 magazines.
10 boxes of zan pellets 7 boxes of fx hybrids .

Everything $1300 obo includes shipping

Hi all,
I'm thinking about getting a tank for filling my M&P-rods w/ Foster fill port. I know there are a lot of them out there.
Reliability and quality are most imortant to me. What brand(s) overall do you recommend? Best source for one?
I'm thinking under 75 cu ft, around 4500 psi. I have a paintball shop nearby that will fill it.
Thanks!

Neighbor just gifted me this gun from a collection he purchased.
I can't find any markings.
Any help would be greatly appreciated.
Thanks

With h&n 21.14 gr domed at 30 yards my home range.

I came across this picture I downloaded years ago and remember this was a 30 caliber daystate wolverine tube gun.

Would make a pretty wicked stalking gun for small/medium game.

I've never seen one since.

Getting ready to order a 22 cal impact. Slug liner and power kit along with a donnyfl ronnin.

Shorter the better but also want to get to 300 yds. Like to shoot the Javalin 40 gr. Anybody doing with 600mm ? Or do I need to get the 700.? Maybe the 33-34 gain slugs?

Also do the 40 grain work in factory mags? Getting mixed answers on this..

Thanks y’all

Anyone else here love hunting mice?
We all love shooting rats, but mice can be a real challenge!
Post your videos and pics of mice kills here.
Dont forget to mention the distance and your set up .

Brand new! Has only been out of the box for pictures. $160.00 shipped in conus.
U.S. Postal Money Order acceptedform of payment. Please check my feedback.

Selling my HFT rig. The gun is in excellent condition. Just hard to see imperfections on rail from mounting the scope. It has an ambidextrous stock in black pepper.It has a 6 grove poly barrel and is shooting at 20 fpe. Shoots the 10.3s and 13 grainers with very good accuracy.The gun is capable of cleaning a course. It was recently resealed and tuned by Motörhead. Just DM me for other questions. $1700 shipped. PayPal

I was able to sneak away a go to my buddies place up north. Last time I was there we cut down about a dozen trees to open his range. What a difference.
That bug thing under the tripod was flawless, not one bug. He now has targets back to 72 yds. He only shoots iron sights but rim fire. I bought the Vickers falling block just to shoot with him. Honestly I like my springers. This is my view for my bench. The two yellow square plates top Center is 72 yds. away. With the Vickers I brought two keepers a HW97 .20 and a HW90 .20. Did I ever say these two were special? I took advantage of the long distance because my range only goes to 47 yds. I’m not the best shot. Here’s two 15 shot groups 72 yds with the 90. Always a great time. 3 hours of driving for 4 hours of shooting.
Still wasn’t enough. Got home, washed up ate and went back on my range with the 97 .20 again. Two more hours of shooting. Finished at 9 PM and still light out. Here’s a 5 shot group at 35 yds. The spinners is 3/4 in.Not enough hours in the day. Crow

Looking for info on a Globe front sight with magnification lens , I have tried a lot of combinations of search words and get nothing except mag's for red dot sights .
Thankyou for any thing that will point me in the right direction .
Stan in KY.

Just received a Dream Tac from Scott.t on here, (great guy!) and I'm pretty impressed. Couple of comments.
1) Whoever said the Notos butt stock tube, (buffer tube) was a different thread than a standard AR must have been wrong. The DT takes standard buffer tubes, and I swapped my Notos tube no problem. FYI
2) This thing SHOOTS! We're getting the left over wind from the edge of the hurricane here today. I shot 28 shots in HEAVY wind at 32 yds, had to stop to reset my blown over target twice, and paid absolutely no attention to trying to shoot when the wind calmed, and still got a 1" group! Wooohooo! Weather report says 15-35mph gusts, but I live on a hilltop and it's blowing way more than that here, so i'm duly impressed. It is the compact Dream Tac and it shoots 18gr FX (JSB) at 910 fps. It's using a lot of air, but for a short barrel and high velocity, with great accuracy, how can you complain. I'll tune it down a bit when this dang storm blows by. The DonnyFL makes it really quiet, easily backyard friendly although I have no one close to me. I took the moderator off and it's not all that loud outside with just the shroud.
I'm glad I dot back into FX again, as I had sold my two Royales a week or so ago, and needed another .22.