If you are looking for a rare Sterling air rifle that has been untouched in a safe for 20 years, this is for you. I'd rate it at 98%. Incredible condition for its age. Underlever, bolt action. I upgraded from two HR-81's in .22 that were tack drivers that I sold off. Comes with front insert. Unfortunately for me, I never got around to enjoying this rifle. Chrony #'s with CPL 8gr pellets: 688, 682, 674, 673, 680, 678. Average FPS: 679.2FPS. Standard Deviation: 5.05FPS. Energy: 8.19FPE. This gun shoots to spec. Google, "Sterling HR-81 .177 underlever air rifle". Please read all parts of the pyramydair article so there are no surprises. If you want to shoot irons with this gun, buy a Williams peep sight (11mm) for around $60 on Ebay. Ship weight: 11lbs, 6oz. Dimensions: 46" x 10.5" x 4". Buyer pays actual UPS ground insured (Pirate Ship). Paypal FF/Venmo/Walmart2Walmart or PP G&S (+3.3%). Asking $575 + shipping.

Today I am selling my used FX Wildcat Original Stock with custom paint job for $100.00...which includes free shipping anywhere in the CONUS insured at full value. I will accept payment via PayPal Friends & Family, or you pay the overage if you choose to send the funds via PayPal “Goods and Services.”

This stock has been repainted with a two part epoxy automotive paint in a Satin Finish, which results in a scratch proof durable almost bullet proof finish...instead of a high gloss shine it just sort of glows as if lit from within. As you can see from the photos below it has a picatinny rail on the bottom, a sling stud at the rear, and has black felt "bedding" inside the front of the inletting. The bottom of the hand grip and the bottom of the buttpad have been sanded down so it sits perfectly level all by itself...and I attached bicycle inner tube rubber to the bottom of the handgrip & buttpad to make it non-slip. It sits perfectly with an Atlas bipod's legs extended at 45 degrees!

So if you have been thinking about replacing the old beat up stock on your FX Wildcat Original this is perfect for you. Utah sells this item for $350 retail.
All the best, Chuck Peffley

I recently picked up an .177 Artemis PP800R, because it is supposed to be regulated versus the unregulated Diana Bandit.

When I shot it with Crosman 7.4gr pellets, I'm getting about 6-7 shots at around ~800 fps consistently, but then after that the pressure gauge hits yellow (100 bar) and then the FPS decreases linearly until about shot 21, when there isn't enough air to push the pellet out the barrel.

I already tried tuning the built in regulator setting by taking off the pressure gauge and turning the screw clockwise, but if I turn it too far down, the gun will stop working entirely (seems like the regulator valve will close off completely if screwed in too far). So the lowest FPS i'm able to tune it to is 750 PSI before it stops working. This leaves me around 8 shots at 750 fps, and 23-24 shots before running out of air.

My goal is fps ~450-500 fps, that way I can shoot indoors without it being too loud, and hopefully get a lot more than just 7-8 shots.

How do I further reduce the FPS? I'm thinking of cutting coils off the hammer spring, but how do I make sure I don't accidentally go too far? Are there replacement parts like a different regulator valve that will bring me closer to 500 fps? Or a tighter transfer port?

Thanks in advance, graph from my testing is below, gaps are from chronograph no-reads

I recently picked up an .177 Artemis PP800R, because it is supposed to be regulated versus the unregulated Diana Bandit.

When I shot it with Crosman 7.4gr pellets, I'm getting about 6-7 shots at around ~800 fps consistently, but then after that the pressure gauge hits yellow (100 bar) and then the FPS decreases linearly until about shot 21, when there isn't enough air to push the pellet out the barrel.

I already tried tuning the built in regulator setting by taking off the pressure gauge and turning the screw clockwise, but if I turn it too far down, the gun will stop working entirely (seems like the regulator valve will close off completely if screwed in too far). So the lowest FPS i'm able to tune it to is 750 PSI before it stops working. This leaves me around 8 shots at 750 fps, and 23-24 shots before running out of air.

My goal is fps ~450-500 fps, that way I can shoot indoors without it being too loud, and hopefully get a lot more than just 7-8 shots.

How do I further reduce the FPS? I'm thinking of cutting coils off the hammer spring, but how do I make sure I don't accidentally go too far? Are there replacement parts like a different regulator valve that will bring me closer to 500 fps? Or a tighter transfer port?

Thanks in advance, graph from my testing is below, gaps are from chronograph no-reads

Any YouTube channels that have good air gun content? Either reviews, lessons, tips, etc. im trying to get into 10m but the content doesn’t need to be about it

I have a lot of different things done to my TX and this time I am adding the hamster.

I ain’t scared!

Niksan Ozark W Donny FL ver. for sale. The Donny FL version has an upgraded, captured hammer spring, anti-hammer bounce system, and larger 420cc bottle. Like new in box. Lightly used and well taken care of. Free of cosmetic defects. Comes with all accessories, documentation, test result documentation from The Pellet Shop, unused spare parts and O-rings, included hard case, Niksan key chain, four 12 round magazines, etc... Everything you would receive if purchased new. Asking $500, includes ground shipping anywhere in the continental US.

My 4 year old Yong Heng turns RP then switched to Seco Lube 500, black, after an hour or so. Other users reported their oil does not turn black. Well, been so dang hot I have not used the Yong Heng for the last two months. Lol, the Seco oil is now clear after sitting so poured it off and cleared the remaining black sludge. I had tried a coffee filter but just made the coffee taste like crap early on last year.

Sorry if this covered in many back posts. Pump still makes good pressure but have collected parts for rebuild when non cooled garage below 98F. I'll stay on high temp rated oil from rebuild on... Cheers.

So I decided to go with a Red Dot instead of a scope on my newly purchased HW44.
I never had a Laser on any of my guns but thought it might be fun to have one on the bottom rail.
Anyone else have that setup?
Thoughts?

Who makes the best hand pumps for high pressure pcp rifles? Looking for something that will go to 4500 psi, but one that will last a long, long time. Thanks!

Like the title says, have a maverick sniper in .30 cal .Bought the gun in February or early March this year. It has the slug power kit installed by Utah Air while it was in for warranty(regs wouldn't go over 100 bar, it's fixed) 1:22 liner that it came with. Carbon fiber fx sleeve and hard case. Excellent condition. Only shot from bench. NSA 54.5 grain slugs 905fps, 44 grain pellets faster than they need to be.found out I'm not an FX guy. I don't want to fiddle and tinker every time I take it out. PM me for more details or search for some of my post here to see my thoughts on this. Anywho I like Taipan, AGT, BRK.Open to other high end rifles as well, .25 caliber.. A compact might be cool, most of my current collection are long guns.The gun was $1800+ so if you're interested your offer should have cost close to the same.
I'll get more, better pictures up tomorrow. Rob

View attachment 487146

View attachment 487224

View attachment 487225

View attachment 487226

View attachment 487227

View attachment 487228

Feature Friday - EVO On-Off valve! The new on-off was driven by customer feedback to alleviate issues surrounding the Epoch On-Off! Let us know what you think!

Taipan Mutant's in .22, standard length, stock does have several scratches in the finish as shown.
It gets 48 shots(4mags) on the reg shooting jsb 15.9gr at 930fps for 30fpe and with the add on LDC is one of if not the quietest PCP I've ever had across 40-50 different rifle.

Includes 2 mags, fill probe, pin wrenches and extra O-rings
Asking $685 Shipped PP F&F for the bare rifle.
Or $870 scoped with the SWFA SS 16x mrad scope and mounts and the STO Pugio with aluminum end caps. PayPal preferred.
.

I would like to look into air bows for deer sized game. What makers are making good air bows? I know that is a broad question. But I have never looked into them at all

Thanks

Hi All!

New member here from Southern California. Growing up I used to shoot a lot with my dad in the garage with a Crosman drifter. Now I feel like I want to get back into it and hopefully join 10m pistol competitions, but doing a quick google search I may have trouble with that latter part being in California. Hope I'm wrong about that and hope to lean on the community to learn about this great sport

Hello. I have an fx impact. It was leaking so I used leak detector to find the leak. It was coming from the front gauge. I replaces with an normal black o rings. It stopped the leak but after 3 days it started to leak from the same gauge. So I checked and the o ring I just replaced was already crushed and damaged. I guess normal o rings will not work. I know Yong heng compressor don't use o rings to seal, they use white hard plastic type disc to make the seal. So for my impact gauge. Do I use o rings or white plastic disc to make the seal? It seem the rubber black o rings get crushed too easily by the pressure.

Well, I've gone and done it...
As much as I love my Taipan Veteran Long, I've always thought it's a bit too long especially since I have it tuned to only around 31 FPE. I do love the shot count, but as a standby varmint rifle I rarely needed that many shots at a time. As a backyard rifle though shooting out of the window most of the time (sometimes at odd angles), the length is a big deal. I've slogged through deciding on the length when I bought the Long and years later I'm still thinking about it. I figured if I'm going to get the standard length, now is the time since they're getting harder to find. I don't know but this Talon Tunes restock last month might be one of the last ones they get. The red stock is not my first choice, but it's the only one left and I'm putting it on the tactical stock anyways.

Of course I get it in my favorite caliber .22 so now I don't know if I'm keeping the Long version or selling it.

WILLING TO BREAK PACKAGE APART FEEL FREE TO TEXT ME AT 985-688-9120

Up for sale is my FX Maverick 600mm 30 cal. This gun has been hardly been used. It stated as a 700 mm 25 cal, I converted it to a 600 mm 30 cal. I added the huma 28mm gauges, TRS Rail, Lower Rail, Cheek Riser, double bottle kit and Adjustable Butt Pad along with the larger cocking handle. I have the original hard case for the gun Along with the 550cc bottle. If you choose to buy the entire package I’ll put the 550cc bottle on and ship the double bottle kit separate. I also have a few extra parts( oring for mags / liner oring, 4 mags, heavier 14 gram hammer and spring, and an oring kit). the gun will be sold with a Donny Fl Sumo no Additional Charge. Scope is also included in package.

$2200 Entire Package Gun, Scope, Ring, Double Bottle Kit, Pellets (7 tins of atomics, 3 tins of hades, 2 tins of Exacts)

—————————————————————————

$1500 Gun with Scope only 550cc bottle. (includes spare parts and monopod)
$1300 Gun no Scope 550cc bottle. (includes spare parts and monopod)
**If you would like double bottle kit please add $200. Double Bottle Kit Includes 480cc Bottles as well with new Airmarksman Valves.**
$300 just for Scope (Element Helix 6-24x50) only
$15 Per Tin of Pellets ($200 for all)

ALL PRICES ARE SHIPPING INCLUDED

I HAVE EXCELLENT RATINGS AS A BUYER AND SELLER! Search username: Zeringue

If you wish to communicate over the phone shoot me a message and we can swap phone numbers!

If you had to choose, which one would it be and why?

FWB 150
FWB 300
Or
FWB 300S

From the picture, you can see which one I prefer. It's the only one wearing optics. Lol

I'm looking to get something that's lower on power than most gun, preferably compact but I have found that most of those offering are $1550 and higher and I'm wanting to stay in the $1200 or under category.

I want to keep it under fifty yards, as I have airguns that will do the work out to 200yds.

I would like a .177 but I don't mind using a .22 in this scenario, hence why I put the notos up. All of these are within the same power range, are about the same length, and there isn't much of a difference when it comes to noise levels from what I have gathered. The biggest difference between them all is the different price point and the amount of shots eor fill.

If anyone can chime in with their experiences I would appreciate it!

Hw97K 177 caliber with UTG 4-16x40 hunter milldot scope and mount. Rifle is extremely accurate with h&n, Jsb and cheap Crosman pellets. Always wiped down after use. Stored in climate controlled safe. Has two tiny marks on the front of barrel stock is mint. 675.00 price drop now 600.00 shipped Will ship in Hard case double boxed, CONUS only

I would be happy to send video of the rifle. My feedback is good. Thanks for looking. Cash is king. I will entertain Trades for something interesting. Would love to have a slug swaging kit of some kind in the 22 cal 34gr relm

Click on pictures and turn phone sideways to enlarge them for better view.

I am coming back to Airguns after a couple years off. Basically I shoot Field Target but don’t have any FT activity in my area. I am working on that.

But in the meantime I need to get shooting. New house has a very small yard. And it’s got neighbors. So I can shoot my springers outside but at 10 meters is is still a little loud and the target needs to be silenced. I got out my 2300 Co2 pistol. and it is quiet enough and it is also low enough power that I can use my regular pellet trap. So now I can set up in my garage and shoot across the patio at a target backed by a hill with a metal gazebo blocking any possibility of a stray pellet leaving the yard.

I like the 2300 pistol but the co2 cartridge have drawbacks. The 1701P eliminated all the problems with Co2 and make a nice pistol package.

I am really just entertaining myself and want trigger time. So I ordered the stock option to convert the pistol to a mini carbine. Something I don’t have. And I can rest the air tube on a sand bag and just stack pellets.

I opted to mount a rifle scope because of the stock. Should be some fun.

I ordered a Hill mk2 hand pump because it’s a pistol and I am waiting for the stock and pump to be delivered.

My 700mm FX Impact M4 came tuned for 18.1gr pellets at 2.5 Micro Wheel and 90 bar Reg pressure. (Line 4 Valve Adjust) I'm not going to touch the valve but does anyone have a good tune to bump up to the 25.4gr pellets?

Should I just turn the Micro Wheel up untill they are flying 890-920 FPS? or would I change the Reg Pressure too? Any advice would be welcome.

M3 owners please share tunes too because the M4 is pretty close.

Thank you!

This coyote has been cruising too close to the neighborhood. He even took one of my neighbors ducks at 10:00 in the morning. It was filmed on their yard camera. So for the last couple days I made it a point to kill this sucker. It’s just getting too comfy and its offspring will too if I don’t nip this in the bud. Thought about just cleaning him out with my 6mm but figured I would give it one shot with my RTI P2 .30 slug sender. We have major storms coming in so I figured I would put out a carcass. Sure enough he came to eat. My gun is zeroed at 100 but this shot to the carcass was 189 yards. Sorry for the poor image quality but when it’s raining, it’s not pretty.

It yipped after the impact so it should be laying in the strip of woods along the power line. Depending on this storm, I hope to look for it in the morning. But it might have to wait until later in the day. Either way, it took a .30 slug to the boiler room so it’s circling the drain.

Unit works well. Was purchased new about a year ago. Very good condition. Lightly used. Not using it much so selling it. Package includes:

• LabRadar
• Padded carry case
• Air gun trigger adapter
• Tripod
• External power (USB rechargeable) battery pack
• All instructions
• LabRadar stickers

Asking $300 shipped for it all to the lower 48. Payment PayPal. No trades please.