FX crown 1 year old. It has a 177 cal 380mm barrel and a 22cal 500mm barrel.
I have 2 magazines. I am only selling this because I want to try a raw rifle no scope or scope rings. $1500 shipped and insured.

I bought this Taipan Veteran 2 Standard in .25 from Utah Airguns on September 8th this year. It is the Grey Laminate Standard with 700mm barrel in .25 caliber with everything that came with the rifle, including the original box, manual, moderator, 2 magazines, and fill probe. Rifle is 36" OAL with Moderator attached.

This rifle is as all fans of Taipan say they are; well built, super accurate, wonderful trigger, and powerful. I'm wanting to buy a Huben K1 in .25 and this is part of how I will. raise the cash. I just can't justify owning 3 PCPs (Ghost, Taipan, and Huben K1). There are no issues and have been no issues with this rifle. It holds air great, no leaks, etc.

The only mod I've made to this rifle from the Vendor settings is to correctly and cleanly install sling swivel studs. I had the barreled action out of the stock when I did this so they are perfectly and securely installed. Easy to remove if you don't want them.

The sling, scope, and sling swivels are not included, but of course the sling studs are.

I hobbled downstairs just now (knee surgery 9 days ago) and put three shots of Hades 26 grain pellets over the Gamin Chronograph. The picture is a bit blurry but the speeds were average of 154 (1054, 1053, and 1057)

In a couple of pictures you will see the side lever "missing". I temporarily removed it to take some measurements for my plans to make a walnut stock for the rifle.

I don't like selling this rifle, but my hankering for a semi-auto Huben K1 is too strong.

$1,200 + $20 Shipping


















In this photo with the box and manual you can see the very tiny little pressure bump just forward of the top of the trigger and cocking handle. About half the size of little finger nail. It is very shallow and does not go deeper than surface finish.

All,

Just had to stop by and share this one. I have a soft spot for the older FX Smooth Twist guns (Boss, Royale) etc. and have owned and do own more than my fair share but this one is special.

FX Royale 400 .22 picked up here not long ago and had been sitting for a number of years. Had a well known FX guy (promised I wouldn’t name names) go through it top to bottom, Huma reg installed, resealed, cleaned up inside and out including the stock, trigger set perfectly, just taking the good and making it great.

This one has one of the nicest walnut stocks I have ever seen on a FX and tuned for 890 with the JSB 18.13 with the carbon fiber bottle it is light weight and just laughably accurate and what I believe is a Neil Clague moderator affixed it is damn near silent.

It is not often I refer to anything as perfect but this one is about as close as you can get in my opinion.

Anyways, just wanted to share an oldie but a goodie.

Some pics below that barely do it justice (be kind to an old iPhone 11 user who refuses to upgrade)

Merry Christmas,
Mike

Holy Cow! I ordered a dozen or so tins of pellets from them and the packaging must be seen to be believed. It took me a while to get into it.

BTW, they have/had a great sale on FX pellets, not sure if they have any stock left, but even if not, it's worth an order to see the packaging!

For sale or trade. Notos with 360cc bottle, mod adapter. It is currently tuned to shoot crossman 14.3g at 700fps and gets 80shots per 250bar fill. Comes as pictured with magazines and softcase. $400 shipped best offer or trade.

I've shot several near hole in hole groups over the years but this is by far my favorite. 2289 Crosman backpacker. Only 15 yards. Nothing ground breaking by any means but the way I got to capture it will probably always make it my favorite. Shooting an old hardwood pallet. Aiming at a knot in the wood. 3 shots and I stopped so I didn't ruin the group...lol

Not an expensive gun, no crazy long range, and a cheap Walmart scope but a memory that will last a lifetime.

I've never had these 10gr JSB V3 slugs expand this much but just wow! This was at 25yds head shot and remained under the skim the smaller expanded one was similar but at 42yds retrieved under the skin in the neck.

580cc Leishy bottle with Peazy. In excellent condition. $250 shipped

My new notos arrived. I started the fill with my air tank. Topped it off with air compressor. Let it sit for about 20 minutes. No leaks. Velocity on my first 3 shots with a 14.3 pellet was 779, 771, 772. Is this about what I should expect from a factory gun.

I took this one with my Prod this morning. It is shooting copper plated H&N FTT pellets about 750 fps at the muzzle. The squirrel was only about 10 yards away so I like the low scope of the Prod. It dropped immediately but when I picked it up and saw the guts hanging out I got a little worried about my placement. The pelleted entered behind the diaphragm but went forward stopping under the skin on top of the off side shoulder. It broke the shoulder on the way past. So right through the lungs and may have hit the heart. Good shot, not a lousy gut shot.

17 ounce male.

I am selling a Derrick Wall Tuned RTI Prophet LR Performance .22cal. Included is 2 magazines, case, manual, extra Regulator, LDC, butt hook. This rifle is a Tack driver and gets a poop ton of shots. Asking $950 shipped accept PayPal friends and family or add 3.5% or USPS m.o.

Also have an extra .177 barrel kit which includes one carm magazine, single shot tray for the RTI. Asking $350 shipped for this.

Reason for selling need $$ for a non air rifle project.
** Note- Scope and rings are not included **

I bought two of these back a year or so ago for my bird abatement and have came to the conclusion that they just don’t break and I have zero use for two of them. Price is for the .22 350mm setup only (scope not included). I’ll throw in two extra valves, original grip, original Edgun regulator ,Huma pellet dispenser and enough orings to last for a very long time. . $900 PP F&F FIRM.

If interested in any of the other items listed below, let me know.

.177 350mm barrel - $175 - SOLD
.25 350mm barrel -$100
Wood grip - $75

Here is the gun that's trying to beat the M4! Thanks for watching! -Nate

I Have a Daystate Delta Wolf with a Custom Lothar Walther 19in barrel and Wylie Kans shroud on it, making it very compact 29in overall length and an excellent slug shooter and not pellet picky, factory dyastate is not known for liking slugs, 2 daystate magazines, extended trigger guard and daystate bipod included. Current scope is not included but can be discussed. Let me know if interested, thank you. I am open to trades, leishy 2, compacts or other bullpups of similar value, let me know what you have, will trade for multigun trade as well. I would prefer a very quiet .177, but I am not picky. I would sell for $1700, no ammo, but can be discussed.

Dear Valued Customers,

As the holiday season unfolds, we want to extend our warmest wishes to you and your loved ones. This Christmas, may your hearts be filled with joy, your homes with laughter, and your days with cherished moments.

As we approach the New Year, we look forward to embarking on exciting new adventures together. Our team is committed to bringing you innovative products designed to delight and exceed your expectations.

Thank you for being an integral part of our journey this year. We’re grateful for your trust and can’t wait to show you what we have in store for 2025!

Team ZAN Projectiles

Skout Airguns is proud to introduce our new universal mount for our rear rest! this shape allows users that have a lot of different platforms to be able to utilize our rest! Also enjoy 10% off through Jan 6th on all inventory Here!

Howdy AGN, I have a new Alpha Wolf Safari FAC in .22 23in barrel that is acting strange.

First issue: Advanced Shot Settings, every time when the rifle times out AKA powers off and then back on the initial shot upon powering on is nearly 50 FPS slower just like an FX with the reg creep issues. The reg is set to 110 bar.

Second issue: Factory Shot Settings, after setting the speed and shooting at least 10 consecutive shots that are within 4FPS, after the rifle times out AKA powers off and then turned back on the computer appears to go through the velocity hunting process as if a different speed was set. It does not matter if the regulator is set to the recommended setting 140 bar or at 110 bar.

I did verify the Wolf's chronograph is reading the correct velocities against my Caldwell and FX chronographs and they are all within 2FPS.

I have a programming pod on its way in hopes a re-flash of the software and looking at the tables to see what is going on may help.

This is certainly disappointing :-(

Any advice from you Delta/Alpha Wolf gurus would be appreciated.

Finally got my handguard from Inspirecraftsandhobbies, needed it to fit a redlight on my Notos so I can shoot creepy crawly stuff in the backyard at night...and seems I have another skunk that's been visiting smelling up the place so I'm ready now. Love the handguard, perfect fit and sturdy.

Also got a new scope for it, a CVLIFE EagleFeather 4-16X44 Side Focus Parallax. I have an old CVlife scope which was decent for what it is but this thing is a huge improvement...for the money and for my backyard plinking it's perfect. Was surprised at the clarity, and keeping zero. I messed around with the windage and elevation for a bit and came right back to zero no issues.

Looking through the scope is much sharper and clear than the video shows, one reason was my light was dying but also for night filming it is recording in 15fps and lower resolution, gotta tweak it a bit yet and find out what works best.

Then I got an mlok flashlight mount and put an old bipod on it and good to go.

Link to the handguard: https://www.ebay.com/itm/335572214473
Scope: https://www.amazon.com/dp/B0CBMHCWLP?ref=ppx_yo2ov_dt_b_fed_asin_title
mlok flashlight mount: https://www.amazon.com/dp/B088CW7W3M?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

My kids got me the compressor for father's day. Today when I was filling my rifle it just stalled and shut off before a complete fill. It just blacked out the temperature lights went dark. I unplugged the unit and waited for a while, fired the unit back up and the same thing occurred. Any ideas? How can I contact Vevor and what compressor would you recommend. I'm new to the pcp world, I want a decent compressor, but being a disabled vet I'm on a strict budget. Any recommendations will be greatly appreciated.

I held out on the M3 because I heard the stories of it being a leaker. They announced the M4 and I figured I could finally try it! Bought this thing from Tony in November and it was leaking out of the box! Sent it out to get worked on and got it back tonight. At this point, I just plain out don’t want it. I did scratch it trying to remove the pressure gauge as I was trying to fix the leak myself that’s why I lowered the price.
$1500 shipped! Thank you!

I acquired an .30 FX Bobcat MK2 that has an air leak and I don't see how to seal it. So I figure one of you FXperts will point me in the correct direction. Under the trigger assembly are two bolts. A 13mm and a 10mm. Next to the 13mm is a small hole. It appears the leak is coming from there. But I do not see anything the would allow me to seal it. Any help here would be greatly appreciated.

Thanks,
Matt

PS. Came with a Hawke 6-24x56 scope and a Hugget Magnum moderator.

I cannot see the lake at all . very heavy rain and thunder till noon . But the temp. is 59 @ 7AM and 3 mile an hour gusts ! (yes the report said gusts )
guess i will shoot indoor pistol .

Since this guy was a pistol when it was born, I’m posting in the pistol section…

My .22 GK1 - Version 1 #67 has shot >30,000 GTOs. It has my “active shroud” mod but everything else has been stock and it’s been used exclusively as a pistol. I’ve changed one Oring but aside from that it’s been a hiccup and jam-free delight. Just a barrel clean every couple tins and it’s just as accurate as when it arrived.

However, the time had come for a change, and I was even considering selling it. But after picking up a 3DP stock from Daniel in Bulgaria, I’m enjoying it again. The stock is nicely printed and a great fit to the gun and my body, which is that of Mr Average. I don’t care for any folding capability.

Popped on a 12X Optimax scope and tuned it to shoot the AVS 22grain .223 slugs that I’ve had lying around for some time. I tested a range of slugs over a year ago and found them to be the best of the bunch. I click em in via the stock gate with no “seating” and they stay put at the rear of the mag and shoot very well. The power adjustment is set to shoot them at 900fps and I get a tight string at 890-905fps (40fpe) between 270 and 190 bar, which is 15 shots. The target in the pic below is 8 shots at 70y. My Vet2 tactical sets a high bar for slug shooting but this is pretty good for a semi auto “pistol”

I ordered a part from K&L a month ago. They charged my card instantly, but it still hasn’t shipped. I started contacting them about two weeks ago to make sure my order didn’t fall off the radar. Still no replies to three emails and a couple voicemails. Has anyone else received anything from them recently? I’m worried they went out of business. I thought about going through my bank for a charge back, but I don’t want to do that if they are going to send my order eventually.

Does ARH (Maccari) produce full tune kits for Pro Sport/TX200 MKIII anymore? Don't see any on his site and would like to tune my new rifles down to the 12fpe range with his quality parts. I've read reviews of TinBum and Vortek and I'd like to go with ARH parts if possible. Thanks for any help. .177 cal