Kicking around the idea of getting one of these, probably in .177. Sometimes things worm their way into my brain & won't go away until I at least investigate the possibility. But enough about my psychoses.

Most of my shooting is 60 yards or less, and done standing offhand. Do you find you do better/worse/same as with other rifles when shooting offhand? Would think it could be set up well for this, given the adjustability of comb height/cant, buttpad height/cant, & trigger shoe position. But I don't know what I don't know. Bonus points if you have experience with shooting air rifle metallic silhouette.
Wouldn't need the power of the HP version, nor would I invest in a heliboard or programmer- primary responsibility would be sending 10.3 grain pellets at 17-20 fpe, well within reach of factory settings.
Have seen that the HP version is factory set to do well with Beasts at high setting, Monsters at medium, and Jumbo Heavy at low. Does the standard version parallel this with 10.34, 8.44, & 7.87 grain at 18-15-12 fpe? Mostly out of curiosity... doubt I would have use for or stock all three.

Don't be afraid to lay into any shortcomings, or praise any exceptionalism... this is just exploratory. My wallet will thank you if you prevent me from spending that kind of dough on something that doesn't work for me. My soul will thank you if you help me find my nirvana.

Hey guys, I recently got an fx impact m3 .25 I have watched a lot of videos on and about the fx m3, and when they say adjust the reg by turning the screw clockwise. Is that when your in front of the gun or from the back? Wishing this would be clarified on future videos. Thanks

Up for sale is my Prophet Performance currently setup with the .22 cal LW barrel. Stock 22 magazine and two Orion magazines.

After market butt stock with monopod

Umarex 3-9x40 AO scope

RTI hard case.

Atlas V8 Bipod

DonnyFl Ronin

$1250 shipped in CONUS. Paypal F&F














At

Just received my new 0.22 HP Alpha Wolf.

It's for pesting/vermin out to 75 yards. No comp work.

Using it, out of the box, on factory settings, 900 FPS with MRD.

Three shots in same hole at 40 yards.

That was easy.

Hi guys,

I have EDgun Matador R5M .22 with a synthetic stock on sale. The stock is covered with hydrographics - carbon matte.

Huma reg with a bigger plenum installed together with a bipod rail.

Reg is set to 105 bars and the gun is optimized to shoot JSB Heavies 1.175g.

There are slight visual imperfections on the scope and bipod rails but the gun operates flawlessly and it is in perfect technical condition.








The price is 1200EUR plus shipping and regular EU price is 1950EUR for a bare unit.

Europe Union shipping only.

Contact via PM.

Thanks.

Hello everyone, I'm obviously new to PCP, I've purchased a Benjamin Akela in. 22. I'm pretty happy with the build quality of the rifle however I would like to install a Lane regulator to improve efficiency and improve effective shot count and trajectory. My question is what pressure ( ft-lbs) should I chose for the reg. I would like to be able to shoot 18 gr pellets at about 875 fps out to 50 yards consistently with a usable shot count of around 75 shots. If I'm dreaming please set me straight, I know this isn't a precision rifle and will be used for hunting and informal target. Any advice would be greatly appreciated. Thank you

Looking to trade my .25 Uragan shoots 25g kings like a laser @970fps 34g @875fps! I applied about 6 coats of polyurethane to the stock to bring out a beautiful shine! Comes with Agt moderator, 2 mags all other factory accessories and paperwork shipped and box in factory soft case. Scope and bipod not included..
Uragan compact, vulcan 2/3, fx maverick, impact mkll, wildcat mk3 bt, ,rti prophet performance, r5m with bat moderator or sell price of $1350 shipped or local pickup in ohio

Shooting my new HW77 today, I have to adjust the rear sight fully left to get close to bull? That was with 3 different pellets. JSB, HN Crossman

To turn an air TUBE gun into a BOTTLE gun....
To turn a SMALL bottle gun into a BIG bottle gun....

➔ For that, we need something like a Bottle-Step-Down Adapter — because bottles/ bigger bottles have a larger diameter and otherwise would not fit under the shroud.


I've seen those adapters for the Avenger, the Prod, and a genius made one for a PP700 once.
There is even an OEM by FX for its Dreamline.


Retorical questions:
▪ Why are there not more adapters and step-down-adapters available — OEM or aftermarket?

▪ Why do manufacturers mount the bottles so close to the shroud that only small diameter bottles can be used?


Real question:
▪ Would someone make a step-down adaptor (for the RTI Prophet I Compact Performance)?
How hard can this be? (Yes, I'm pretty ignorant when it comes to engineering, please use fuel sparingly when flaming me, remember the outrageous fuel prices.)

Matthias



The photo shows how the adapter steps down the air reservoir connector in order to allow a large diameter bottle to be mounted, instead of a small diameter air tube (Dreamline).

AGT Vixen Long in 177 for sale. Unfired, new air rifle. Everything that comes with the gun in the box. $950 shipped CONUS. PayPal FF, Venmo, or Cash app. Thanks for looking. (PELLETS AND SLUGS NOT INCLUDED)

Excellent condition. No marks, no clipping. Only used on my Impact .22 cal. from the bench. Just opened up and cleaned. $85 Firm shipped. Not interested in trades at this time. Thanks for looking.

Also have a DonnFL Tanto listed separately for $85 .22/.25 cal. 1/2x20. Buy both for $160 Firm shipped.

PP F&F or USPS MO
Thanks for looking!

Day 2 Lane and course assignments

















Tom Holland
Field Target Tech
Fieldtargettech.com

Mk2 700cc 700mm .22 shooting zan .218 30.5 at 1045 fps with a SD of 5.8

180 on the reg, 3 on power wheel, 3 lines on valve.

Far right shot was gauge wind
Low shot was a big drop below reg pressure

Distance was 105 yards. There's 2 in the top hole then 2 below it.

I do have an ABL setup coming and I think that could change the game for the ATN

Matt also hit a waffle ball at 265 yards with the rifle.

Needless to say I'm proud of what I put together after having my reg oring leak and deciding to completely go through the rifle, and impressed with it thoroughly.

Oh I also got my first ever benchmade edc knife and I'm inlove with it lol just thought I'd share

I have always wondered why people pick there forum tags. What made you choose yours?

Mine is Septicdeath.Because I like to shoot the S%#T out of stuff.

Hey guys,

I've watched a few videos of zeroing scopes (never done it before) and it sounds like adjusting the turrets to the point of impact is one of the more popular ways. I just got a Hawke Vantage 4x32 AO Mildot scope and am starting to play around with it. It seems one of the pre-reqs too is to have the gun in a stable position so it's not moving around etc. Anyone have ideas on what's laying around the house that I could easily use to stabilize the gun without having to buy gun rests, bipods, clamps, etc? I really just bought the gun for squirrel control in our smaller backyard. I probably wouldn't be shooting more than 10-20 yards max in most cases. Oh, it's a Crosman 1322 btw. I have the stock and just updated to a steel breech. I may put a longer barrel on it at some point. Just want to get the scope sighted in before I start buying more stuff though.

Would anyone of you that understand about coeficients could tell me please which of these two options in. 25 Cal would in theory be better in terms of efficiency against wind?

Thanks.

Feinwerkbau’s fabulous 300S — is considered by many airgunners to be the gold standard of vintage 10-meter target air rifles.
$600 Flexible. Buyer pays to ship. Paypal preferred.

Inherited from my younger brother who passed a few years ago and was an avid airgun enthusiast. Apparently won some kind of Texas Championship.
The barrel had some rust so I applied a little oil. It looks in great shape to me.

Read link for review

Sig P226 navy seal edition blowback pellet co2 pistol and a beretta full auto co2 bb pistol , great fun for the kids or plinking, don’t use them anymore, both come with hard case

$125 shipped conus PayPal f&f

As previously posted with other rifles, this rifle is one that I purchased new from AOA in December of 2021, to have a winter project to help me maintain my sanity, one of probably a dozen such purchases.

This rifle is a virtually new, Weihrauch HW80, in .20 cal. There is not a mark on it that I am aware of. The only non-original item is the little stud that centers and holds the rear sight spring in place, as it must have fallen out when I mounted the scope and was no where to be found when I went to put the original, never used iron sights back on today. I fabricated what was needed from a roll pin that I filed off to fit perfectly.

This rifle has had a Vortek PG4 Steel HO put kit installed, complete with Vortek's vacuum piston seal, and the internals have been meticulously polished by hand. The trigger was completely disassembled and the components hand polished. It "breaks" like glass. As you can see, I was able to reduce the 10 shot group size on my 18 yard indoor range to only .24."

The .20 calibers are among my very favorites as I feel that they shoot extremely accurately. There is absolutely no "buzz" in this rifle now. It is very, very smooth to shoot. I am only selling it to make room for more projects this winter.

Attached are all of the test targets and performance statistics. All together, I don't think there has been a tin of pellets through this rifle. It should last for generations.

All inclusive with the Vortek kit, Vortek vac seal, and the rifle from AOA, I have $665 in it, not including all of the custom tuning work and pellet testing. I am offering it shipped within the continental US for $600 via PayPal F&F or add 3% for regular PayPal. With the tuning already complete and no shipping to or from a tuner, this should be a very good deal.

If you are worried about pellets, I probably have 10,000 H&N 11.42s on hand and in the new tins of 250. I would be glad to include pellets at the Pyramid Air price (plus the additional shipping due to increased weight) should you want to be sure you have pellets for your rifle.

Have a .30 cal RAW with lots of extras
Asking $1700 shipped
Paypal f&f
Excellent buy
Bi pod scope not included
Any questions text 513-748-7777....thank you Jim

New GRS Crown MK II with 600mm .177 barrel. $1900 shipped. No trade offers please.
I can swap caliber with a brand new 600mm .22 barrel kit that I have if interested.

2300 TO MANY UPGRADES NEW CASE CO2- HAWKE RED DOT was 120 bucks -OEM GRIPS SHOOTS VERY GREAT HAS SEAR ADJUSTER GUNS 98 PERCENT PERFECT GUN TRIGGER IS REALLY NICE DIME SIZE GROUPS WITH 13.43 JSB AT 30 YARDS FUN LITTLE GUN 35-40 SHOTS PER CHARGE NEW FULL CASE CO2 ALSO GOES WITH IT SHOOTS ABOUT ANYTHING PRETTY WELL CHEAP AMMO 175 shipped

Selling my non power block m3 impact.22 cal with 600mm standard superior liner. Has digital angled huma gauge,Ernest Rowe transfer port, and new fx brass pistons in both regs, oring kit, 1 magazine,hard case. No paperwork. No scope or moderator included. Sell for $1650 PayPal shipped lower 48. Text is faster 828-455-4459

Like new condition. Asking $75 shipped I accept PayPal F&F. Any questions just PM me.

STUD New Product Release - About a month ago we released the new 40 round magazines in .25 caliber for the FX Impact. We now have the .22 caliber version of this magazine available and in stock in our store. Silky smooth feeding on the STUD roller bearing and chain system assures accurate indexing with every shot. Visual "shots remaining" indication assures you will never run out of rounds at a critical time.

We have also designed this magazine to fit both right- and left-handed shooters. With over 1" clearance between the inside of the elbow and the bottom of the mag (right-handed) and 1" distance from chest to the face of the mag (both right- and left-hand shooters). The mag will never make contact with the user.