Like new! Asking $275 shipped

Anyone order direct from AGT ? Lets just say I lost the shroud on my 177 Uragan 530 cc bottle gun,
I have a after Market shroud on my 22 Veteran, Be cool if I could find one to fit my Uragan.
Mike

I am shooting slug so want more power, so decided to get the new 72 pp with the power block. It was $220, not including tax and shipping. B4 upgrading, I tested my gun and it was shooting maximum about 960 fps with 36gr nsa slug. I can turn hammer up but fps won't go any higher. Power wheel is on 4, reg 150 bar, valve fully open, 600mm slug liner A.
After installed the power block and 72 pp, without touching reg and power wheel, I tested with same setting and got like 900 fps. I was like wtf why would my speed drop just by changing the plenum. Then I though maybe bigger plenum of 150 bar is too much for the hammer. So I turn to 5, it was shooting 980 fps. Then I turn wheel to max and it is 985 fps. So I guess upgrading from mk2 pp to 72 pp and power block grain 25 is fps. Not sure if that was worth $220 lol. Just letting other know what you expect for those thinking about upgrading. I was expecting like over 50-100 fps more cause its the power block youtubers been talking about plus larger 72cc pp. Guess I expected too much lol.

Well, hunting seat & bipod, but you knew what I meant .

Have been doing more shooting from that position lately. The Cricket carbine was probably feeling neglected, a couple other rifles have taken precedent for several weeks. So I gassed her up for a quick ride in the backyard. Finally a break in the rain, still overcast but no wind worth mentioning, which was nice. Target lasered at 52 yards even, one full magazine (14) per bull. The 10 ring on these is 0.89", so each group right around an inch center to center, maybe even a hair under.

Has been interesting working up a good position for holding steady on the sticks, took more experimenting than I thought it would. Still have to work on consistency, probably always will. That's ok, like all shooting it's a process I find enjoyable.

Gotta brag a bit on the rifle, just does it's thing shot after shot, fill after fill. Over 5k shots on it in the short time I've had it, & not a bad flyer to speak of which wasn't my fault. Or the wind, 16 grainers aren't exactly breeze busters. Suppose I have to claim those too, for not reading it right (which I seldom do)!

For sale is a Hawke Frontier 30 First Focal Plane 5-25X56 rifle scope with Hawke's very useful Mil Pro illuminated reticle. It has been very gently used in a couple of benchrest competitions where it performed great, (tracking is spot on) otherwise, it has never been used in the in the field.

Asking $650 (MSRP is $1149.99)

I also have FX No Limit Rings for an extra $20 if you want.

Selling my Leshiy Classic in really nice condition, came originally with a 25 cal 250mm barrel.
Has a Brand New Huma reg installed, also included in the sale is a 177 250mm and 22 cal 250mm Barrel.
Comes with 1 spare valve, original box with warranty card, fill probe, upgraded Huma-air gauge & Eagle Vision mod adaptor to connect your donnyfl (no donny included).

Asking 1425 obo shipped conus. PP FF

Im only selling on AGN, no other sites.

Good Day AGN'ers!
****SOLD****
For Sale:
1 - Black, Picatinny Scope Rail from my M3, so it has the +20 MOA built-in. $60.

Includes shipping within CONUSA only. Please, NO TRADES needed. PayPal is preferred payment (adding the 3% to protect both seller/buyer). I have both bought and sold on this forum many times and a member since 2018 with lots of posts.
Thanks!

mike

Hey Guys, this is very basic - but still an issue, plus I'm being lazy.

Trying to pump up the gun's 480 cc cylinder using an Xisco (electric) pump .... when the tank's completely empty.
Have cocked the hammer, so not hitting the valve, but never had this issue with a pump.

I think the most likely suspects are the gun's fill valve nipple (needs a o-ring) or the two Quick Fill o-rings need replacement .
I hate the hole bubble process of locating leaks.

I have a TX200 I would like to trade. This is no safe queen. This gun is a great shooter. Please see the pictures for complete details of the condition. Gun was manufactured 1/5/2014. PM for any questions. Trade for a .22 Avenger, Marauder or the like. Scope and rings not included.

So my Diana 56TH arrived today (thanks @Lewis !) and I am having a good ol time with this thing. I wouldn't quite call it "recoiless" but its definitely easy and fun to shoot to say the least. 19fpe with JSB 15.89gr and its just pellet on pellet on pellet at 30 meters. This is my best group so far with it. 20x shots into about a 1/2" string. I was going to tune this thing for a bit more power but at 19fpe I dont really think I should.... anyone have any strong opinions on that?

.25 cal with bag rider/monopod and blue laminated pistol grip and cheek rest. Less than a tin of pellets through this gun. Selling to make room for something new.
PayPal if possible. $800.00 plus shipping.

I have a Maverick .22 compact with a 600mm barrel. Comes with An Hawke AirMax scope, slug kit, two magazines, Donny FL Moderator and the 500mm barrel with the original pellet probe. I bought it November of 2021 and it sits in my closet. It’s gotta go so I can support my other hobbies/habits!
$1350 shipped.

View attachment 288087

I'm about to become a dad, and needing a little extra cash. I purchased the Impact from Utah Airguns in the fall of 2020.
The gun is in perfect shape, shoots 1/2 groups at 50 yards with no problem. It is set up for 18 grain JSBs currently.

Comes with a Tatsu moderator. I do have a Nexus scope on it now, which could be for sale if interested.

The gun shoots flawlessly, never had a single issue with it.

I'm located in Louisville. PM me for details!
Asking $1,499 + shipping. PayPal or cash

Thanks

Mfg 7/15, 97 cubic foot great white tank 4500 psi, dual pressure gauges, full armor kit, feet carry handle, slow flow valving. 3ft micro bore house, fire department fill adapter. No scratches or problems. $450 Paypal. You pay shipping, Local pickup in south central PA, Shipping CONUS only.

I have a .22 cal AEA. sparrow HP for for sale. Shoots great with the JSB or FX 15.89g. Has folding and length adjustable stock. I am the second owner.
Gun includes two 12 shot magazines, fill probe, added 1/2 UNF moderator adaptor, added saber tactical pic rail clamp for bipod addition.
Asking 200$ shipped PayPal
Scope, bipod, and moderator not included.
Thanks for looking
Only listed here

This should (hopefully) be a fun question for the group:

• Would the blast of air required to get it to that velocity deform the skirt against the barrel?
• Would the "dirty air" coming out behind the pellet flip it over?
• Would the rifeling be too fast regardless such that the pellet wouldn't spin, but just get torn up on the way down the barrel?
  • Would a smooth-twist barrel fix that issue?
  • Badger5th suspects that the head of the pellet may get blown off and leave the skirt in the breech
• Would the increased barrel-whip be the nail-in-the-coffin?
• The BC would be jacked up and cause the pellet to get into trans-sonic soon after firing (Scotchmo's contribution and "hurrumphed" by others)
• Increased Gyroscopic Effect if the pellet engages the rifeling (Dizzums contribution)
• What am I missing?

LNIB 4-16X44 30MM DISCOVERY SCOPE DAMN NICE LITTLE SCOPE super nice reticle sunshade BOX PAPERWORK LEVEL 150 SHIPPED with the new utg style rings that were 60 bucks

One needs to charge the battery. There is an external power supply/charger included. But where did they put the onboard charging port. Way back in a mouse sized hole in the beautiful wooden stock. In there lives ( I think) a female C charging port. You either take Daystate's word for it or verify it with a flashlight. The cord for charging is so stiff that rotating it in the fingers to get the correct orientation so the male end matches the female end is rediculoous. To check to make sure you have the correct allignment you have to shine a flashlight into that dark mouse hole to see how to line up the end you are trying to plug in. Once you determine that trying to put the charging plug into the recepticle is really tough as ther isn't much room to move you fingers,hand. You might think you felt the plug enter the charge port. Well ther is just enough space on either side of the internal port that you can plug into that wooden area and think you are charging...and you are not. Maybe I am just and old crusty PCP er and if some body has found an enlightened way to get that charge cord plugged in...please teach me.
Somebody with a 3D printer could make an adapter that just fits that mouse hole and and is designed so that pushing in the charging end of the wire is guided into the rifle charge port. A tapered mouse hole kind of thing.
Rant is over but seriously?? Did anyone not see this at Daystate?(Hey! I really do love this rifle) Thaks to whoever told me to to try the 34g pellets. It's mad a difference.

Sale Rules:

• I only accept PayPal for payment
• CONUS shipping is included in the asking price via Fedex
• I will go based on PM timestamp.
• Please – no trade offers for this sale.

Like new, beautiful Walnut finish Taipan Veteran Standard in 177 purchased August 3rd, 2022 from TalonTunes. I installed a HUMA regulator purchased from TalonTunes set at 120 bar. No leaks. Shooting great at 40 yards with JSB 13.43s at about 864 fps.

Included:

• Taipan Veteran Standard .177 with CZ Barrel from TalonTunes on 8/3/2022
• HUMA Regulator from TalonTunes on 8/18/2022
• 2 Orion Magazine Holders
• 2 x 10 round .177 magazines
• Single shot adapter
• Original regulator, pins, fill probe, o-rings, manual

Total Cost New: $1640

Asking Price REDUCED: $1175 Shipped CONUS to your door.

The Katran Compact like LeePerryman2007 (IG)


Or the Taipan Veteran like @Greenarrow

What’s going on here? First few times out with this gun it cycled perfect with 8 different mags, this past weekend things got bad. At first I thought it was a problem with magazines, some were cycling flawlessly and some were skipping a couple pellets when cocking, but after much shooting I determined it to be a problem with the gun as I was having problem with all mags. . Is there an adjustment for this? Going to call dealer if I can’t get an answer here soon. Kalibrgun Tac II .25.
Thanks for any helpful informatio!

LNIB 22 cal hw 50s. 250 shipped. Post pictures later. Shot less than 50 times.

Hey guys and greetings from Finland.

Just got myself my first PCP rifle, a Reximex Throne Gen 2 .25 cal (from a finnish dealer asejaera.fi) and have not fired a single shot yet, waiting for the Vevor PCP compressor to arrive.
Scope is a Scandium C22 3-9x40AO, also got a Umarex TBP 2 bipod which is not visible in the photo below.
Everything seems quite impressive so far.

I live in nice remote enough area so I will have some land to shoot on.
Will probably make some kind of shooting range in the woods.

Reximex Throne Gen 2


Vevor 300 Bar with auto stop

My least expensive rifles shoot slugs most accurately, maximus 22, beeman chief 177, gamo urban 22, is this true for anybody else with budget guns ? Not hole in hole but 1" at 40 yards.

I had my Taipan Veteran for just under 3 years now and it's been brilliant. Is possible to make the safety easier (require less force) to operate? Vendor had no suggestions.