U.S. Optics TS-25 JVCR FFP IR scope, LNIB, This scope is OOZING with SEX APPEAL, I sold the rifle it was on last March. So I am no longer using it. It is 5-25x with the 30mm tube, Illuminated JVCR reticle. Comes with everything as it would new, Flip up lens covers, cleaning cloth, wrench, quality inspection sheet and manual. $425 (firm for now) shipped and insured to the lower 48. USPS or UPS (buyers choice). Not interested in trades, PayPal preferred. Thanks for looking

So was having a funny poi change out of the blue a few weeks ago, and fought it tring to figure out what was the cause.

Doing all the common hw things to do and same ol results . Like shooting good and out of the blue go 1/2" left then maybe go back good every one or so shots.

Then near my wits end scratching my head bald i picked it up , cocked and loaded snapped it closed and went to take aim and the lolly post was gone...lol

Well well... Lucky i got the stick magnetic and found the lolly post and in 3 or 4 attempt's with different glues and using another unused rectangle post as a new base with got it to stick ( knock on wood) under many shots recoil or i should say so far so good .

Ya, dont guess id ever expect that post to break off like that or it was a defective somehow.

Anyway forgot to picture the glue job lolly post but its in and been testing it out today under this glue job.

Heres the broke insert ring minus the post part..

Anyone else have that happen?

Looking to trade my .30 prophet for a Huben .25. Gun works as it should. I cant get used to the left hand lever. Has a few scratches from hunting on the tube and a little on the LDC adapter. Have only shot JSB 44 grain at 900 to 905 but plenty room to go up for slugs. Looking for nice Huben.25. Message me for any questions or more pics if needed. Only the gun is offered, gun alone unless your trade has same options. Thanks for looking....Mike Will sell $1150 shipped.

Up for sale is a lightly used .25 caliber AEA Varmint Bolt Action airgun.
It was used for a review and one hunting trip. It is holding air and 100% functional.
It will come with a fill probe, 3 magazines, a DonnyFL 1/2x20 UNF thread adapter and the original endcap.
It does have one noticeable scratch at the muzzle end of the shroud from when I originally removed the endcap.
The airgun will be shipped to your door via UPS ground. It will be double boxed (including the original box) and insured.
Price is $500. PayPal is preferred, F&F or you pay the 3%.
PM for additional photos or with questions.

Daystate Huntsman in .177 $1200 TYD

Up for sale is a used .22 caliber AEA HP SS Semi Auto Pistol.
It was used for a review and a few hunting trips. It is holding air and 100% functional.
It will come with a fill probe, 3 magazines, a DonnyFL 1/2x20 UNF thread adapter and the original endcap.
The airgun will be shipped to your door via UPS ground. It will be double boxed (including the original box) and insured.
Price is $350. PayPal is preferred, F&F or you pay the 3%.
PM for additional photos or with questions.

I have been talking to a few airgunners after seeing what happened to DonnyFLs website change recently. Looks like we might be in the beginning to the end of legal over the counter airgun moderator sales....

Hopefully I am wrong and only time will tell, but what do you all think about the ordeal?

Moderator EDIT: AS PER MICHAEL - THIS THREAD IS LOCKED FOR REVIEW OF RULE VIOLATIONS. "Anyone who breaks the rules particularly regarding Firearm accessories and related discussion will receive warnings." -

SIMPLY PUT - DON'T GO THERE (FIREARMS AND ACCESSORIES)

Done

I've purchased a 1st gen .22 cal Maruader, not in possession yet. I've been scrambling for a week on how to power this and thought I could use a free scuba tank which as you know and now I know they can only fill to 3000 and the scba shop told me I wouldn't be happy with it after filling the gun once or twice, so I've decided to buy a compressor. I was originally gonna buy a Tuxing 032 which are 1109 now on Amazon but I think the 031 would work just as well for filling a rifle? I'd be saving several hundred. What else would I need to buy in order to get started with this setup?

I just can't wrap my head around any of these lesser priced compressor's no matter how many reviews I read on them. I'm aware that a real compressor is over 4,000, that's not gonna happen. A first time shooter probably needs that guppy tank but the filling station is an hour away for me!

[No trade offers on this listing please...]

Hello AGN,

I'm looking to sell a super nice FX Impact M3 Bronze Standard 480cc in 600mm (Superior liner) 0.22 caliber w/ 1 magazine, FX stackable moderator, bipod, stainless steel bolts and factory FX hard case. I am the original owner of this Impact and bought it new from Penchetta in AZ; it has been one of the best shooters I've ever owned and my go-to rifle ever since I got it. It is insanely accurate and consistent and is currently set up to shoot the JSB 18.13g pellets through the 600mm Superior liner at ~930-940fps with the 2nd regulator only set at 80bar. It's got a very efficient tune and has plenty of power to spare - you can leave everything else the same and just turn the valve adjuster out one full turn out and you'll easily get the fps up to 1,000fps . . . a 3/4 turn of the valve adjuster in and you'll have it just under 900fps and almost silent. At its current setting, the FX stackable mod is surprisingly effective and this rifle is already very, very quiet.

Rifle is in fantastic condition as shown in the photos; I mostly shoot from inside my home office and very occasionally walk around the backyard with it - meaning that it's never truly been in the field on any real hunt. It holds air and functions perfectly. I will include the original sales receipt from Penchetta and will be happy to assist in any warranty issues that might come up in the future (rifle has been perfect and had zero issues to date).

[This rifle currently has the standard 480cc bottle on it but I do have the smaller 300cc bottle if you prefer a more compact/lighter setup. Bottle decals can be easily removed if you don't want them.]

This beautiful M3 comes with the following upgrades / extras:

• FX factory stackable moderator
• Latest FX Impact M3 lightweight, hollowed out cheek rest
• Atlas clone bipod
• 3D printed butt pad w/ bag rider
• Stainless steel bolt kit (already installed; original blacks screws will be included)
• Original Penchetta sales receipt

PLEASE NOTE: scope and mounts are NOT included in the purchase price...

Price is $1900 + 1/2 actual shipping

Local pickup is available in the SF Bay Area - otherwise, payment by Paypal Friends & Family is preferred (or add 3.5% if using PP Goods & Services). I have plenty of feedback both here and dating back to the Yellow Forum so please feel free to do your due diligence and know that you're dealing with a reputable trader.

WTS/WTT
I have a Texan 308 that shoots great, no issues what so ever. I have the 308 LSS and it's basically the same gun ,just has the shrouded barrel. So I don't need 2 of the same gun. Would consider trades. Asking 800 shipped TYD. Open to offers. If interested you can text me at 903-348-8735. Thanks for looking . Scope and bipod not included.

Other than some minor tweaks to my VP when I got it I really hadn't made any changes to it. I never even thought about touching the micro adjustment of the hammer spring either.

With it being cold with 30 mph winds the last few days and after watching AEAC video and going through this thread.

I decided to switch from the pellet port to the slug port and start from scratch just for the experience.
Initial tune was pellet port, 2nd reg at 120 bar, wheel at 7 and upon checking the micro adjustment was 3/4 turn ccw. I was getting 893 with 34 gr JSB's..
The thing that got my attention in the above post was the possibility of achieving the same speeds with lower pressure/hammer.

I flipped the port, lowered the 2nd reg to 105 bar, wheel at 6, micro cw all the way. Low 800's.

After working my way through a few things with the hammer spring I ended up with slug port, 2nd reg at 112, wheel at 7, micro adjustment at 1/2 turn ccw.
30 shot string resulted in
Avg FPS 910.13
Max spread of 11
SD 3.54
I was very pleased with this but......decided since it's simple to turn the wheel down to 6
30 shot string resulted in
Avg FPS 908.93
Max Spread of 7
SD 2.94

Going down to 6 was a large FPS drop.

I originally was going for an FPS of around 900 but overshot my reg adjustment going from 105 to 110 and after a few dry fires it moved up from 110 to 112 where it has stayed.
If this wind ever dies down I'll do that final confirmation and sight it in to check it's grouping. I also want to see how much improvement there is in shot count per fill.

The Prophet I Standerd, The Prophet I compact, The prophet II Standerd , The Prophet compact II
The barrels really get confusing Most compacts have the 400 or the 510 mm barrel, LW or CZ barrels new barrels will not be out until april of 03.
Now I am not sure of the big bottle RTI Prophet I have heard some of the Prophet II have been released with the new pellet slug barrels , People need to put down what gun they have what barrel they have keeps me from getting confused .
And the FX people just thought they were confused , LOL

I have a under lever air rifel and it dosent cock when i open the barrel and push on it to cock it after some pressure the lever just slips from inside the gun where its connected at the spring i check and the place where connect and pushes the metal is king of broken so i want to know what part i have to change

50hrs on unit, just sent in to have it totally gone through and brought up to new condition by Todd who helped design this compressor for AoA, With Joe B alpha inline filter dryer. Still in box from return shipment. Bought a ALKIN so no longer need this compressor. $1500.00 PayPal, split shipping.

My winter hobby is shooting in the basement at 8 yards from a bench with my Weihrauch HW44 in 177. I am determined to get at least one group that measures right at 4.52mm with 5 shots. Whether it's possible or not is not the issue. It's the hobby - gives me a mission for these cold, snowy Northern Michigan days. Anyway, I am closing in on that elusive group as shown below.


The lower left bull is the closest I've gotten so far. I'm using QYS Chinese match wad cutter pellets 8.18 grains. I also use JSB match hand sorted 8.26 grain wad cutter pellets.

I’ve got 3.

I’d like to trade for a 700mm .22/.25 cal (preferable), or a 600mm .25 cal (less preferable BUT LET ME KNOW STILL!)

For even trade with one:

500mm .22 cal barrel kit with probe
600mm .22 cal barrel kit with probe (this one has a few marks on the metal, but it’s nothing serious)
500mm .25 cal barrel kit with probe

If you’re looking to trade for your impact barrel…just keep your shroud and I will keep my shroud and we will just send the barrels+probes without the shrouds. The Impact shroud doesn’t fit the wildcat/Maverick.

FYI edit: Impact probe will not fit in Maverick! So if you have a .25 cal Impact barrel, that’s the only one I can trade for since my probe is a .25 cal.

All are superior liners.

Just came into possession of one. Out of the box , first thing that hit me was how light it was! Felt like 5 lbs. Feels rock solid. Going to have to learn reg adjustment and hammer spring adjustment as well. look forward to shooting it next week, weather permitting.

Hello AGN:

I've got a couple of bipods sitting around that I don't use - one is an Atlas clone and the other a CVLife. Both work well and are in good condition.

Price is $50 shipped...

Trade interests include:
-Saber Tactical Impact ARCA 3 Compact (ST0047)
-Saber Tactical Impact Compact ARCA Rail (ST0023)
-JSB 0.22 18.13g pellets
-JSB 0.22 15.89g Hades pellets
-JSB 0.25 25.39g pellets.
-JSB 0.25 26.54 Hades pellets


I've got plenty of references here so please feel free to check them on the Member Feedback forum prior to purchasing. Paypal Friends & Family payment is prefered (otherwise, please add 3.5% to cover the fees). Local pickup in the SF Bay Area is available as well.

Thanks!

I am new to this and just trying to wrap my head around some of these compressors being many thousands of dollars. Is the Amazon ones around $500 ok for beginners or are they junk?

Does anyone know any places (farms, livestock places, homes) in central Minnesota that need help getting rid of pests? I really want to start a Youtube channel for pest control, but I have no idea how to go about finding people/farmers/owners who allow or need help with such. Now, I can just shoot for fun, doesn't have to be for Youtube. I love those videos of airgunning for rats, ground squirrels, groundhogs, or anything that crawls that drives the farmers nuts.

Any ideas?

AoA just dropped some nice used Airguns today. Wish I was in the market. Figured I share.

A good friend of mine has a son who is getting into airgun’s. Who has asked for my guidance. He also is build he’s own YouTube channel. Together we’re building some content, whether it be good or bad. I said, I would help. He took advantage of the Effecto Black Friday sale. Buying him self a .25 Zeon at a very good price. Being very proud he brought it by and we filmed are first video. I thought I’d share it with with everyone.
Thanks Mont

My dad and grandpa taught me gun safety and how to properly shoot a rifle when I was about 5. I would go hunting with one of them every year for either Whitetail Deer or Squirrel. When I was about 8 my grandpa gave me his old Ithica Single Shot Lever Action .22lr rifle and taught me how to use iron sights.

I remember back when I was about 9 when my dad would hand me a handful of .22lr rounds, grab my single shot lever action Ithica Rifle out of the safe, and tell me to go out and hunt squirrels on the backside if the farm for the day while he worked on a project vehicle. This became the norm on a day that I didn't have school to attend or chores to get done. I remember thinking I was the youngest of my friends to have the opportunity to go out on my own and hunt with a firearm without supervision which was a nice bit of freedom to have!

Fast forward to present day. I am now 32 years old and have a daughter of my own that just turned 4 this fall. She is always outside with me when I am either working around our property or shooting one of my airguns. I patiently waited for her to ask when she could learn how to shoot or become interested in having her own rifle to shoot. So for her 4th Birthday I surprised her with an Artemis PP750 kitted with a Red-Dot and a DonnyFL. She was so excited to have her own rifle! We are working the importance of respecting the rifle and general safety guidelines. I learned that teaching a girl how to shoot is a lot easier than teaching a boy haha. Boys are more of a pull the trigger and listen to the instructions afterwards!

After our first few shootings lessons I have learned that the Red-Dot is a bit complicating for her to understand how to use at her age so I swapped it out with a laser so she can focus on trigger pull and keeping the rifle on target (which works better as I can see exactly where she is aiming at all times). All in all she enjoys shooting and hopefully I'll have a Squirrel hunting buddy in the near future!

(Some might think 4 years old is too young for backyard shooting. I believe it all depends on the child's maturity and willingness to learn)

Proud to have the opportunity to pass on my knowledge that I have gained over the years to my daughter. I hope all you dads out there are doing the same!

Leshy 2 .30 (non REPR) 350 barrel.
1) larger air tank installed/included
2) Valkyrie guard installed/included
3) 2 mags one black one red included
4) 2 mag clips included
5) blackout rubber kit included…not installed
6) custom trigger installed and included
7) edgun west grip installed and included
8) magpul forward grip included
9) scope installed and included
10) edgun west moderator and barrel shroud installed and included
The Donny Fat Boy is not included. Pic to show what it looks like. Comes with factory grip and moderator
This gun is one of my favorite ones. Flawless. Zero issues. I have two leshy 2 guns and the other is my number one favorite.
$1900 FIRM. Zelle or PayPal f/f or +3.5%. Willing to split shipping within CONTUS