220 shipped for the 480cc
180 shipped for the 300cc
conus

I've read numerous posts concerning barrel polishing. It seems the general rule is to start with JB's bore cleaning compound, followed by something something like JB's Bore Brite; with cleaning the barrel between polishing compounds. What I've read is mostly in reference to new barrels. Does the same two step polishing technique apply to barrels that have many rounds through them? My FX Dreamline .22 barrel has had over 20,000 rounds through it.

The small vent hole on the side of my shoebox is venting a small amount of air during operation. I believe the problem is the very small O-ring that sits inside the space where the vent knob is located. Anyone know what size 0-ring I need for replacement. It is NOT the burst disk.

I am seriously considering getting one of these rifles. I really like having a semi-auto option. Does anyone have personal experience with them? What are the pros and cons. Is it a legitimate deer hunting rifle, or should I get something else for deer hunting?

Was at Wally World yesterday and found this on clearance. Set it up in the basement at 10 yards. This is going to be a lot of fun. Nothing like standing at 10 yardsticks open sights trying to hit a moving target. So far best is 7 shots to get all 5.

I can see where I am going to need to source more foam balls. Tried ping pong balls, but they are too heavy. May have to re-engineer it for more power for the ping pong balls. And an AC power source will last longer than the 4 D cells.

I am finally ready to get serious about placing my order

If Im not mistaken, all the Alkin compressors are freight shipped directly from the manufacturer regardless of who I order it from and the prices are all preset by the manufacturer as well… so I suppose it doesn’t make much difference which authorized seller I choose to do business with as far as attempting to find any “better deals” is that about right?

Is there any source you know of that actually keep inventory in stock? I kinda wish I would have been able to finalize my purchase prior to 2023, as apparently Alkin no longer offers the manual shutoff version which could have saved me enough to pay for a JB Great White!

Where do you guys recommend I place my order through? I’m in California near Sacramento if that affects the recommendation - Thanks!

I arrived at a neighbors farm today and saw one pigeon on the nearest silo. Got my 25 cal Impact out and snuck down to the equipment shed for a rest and a closer shot. It had flown off the nearest silo and landed on the farthest one that I ranged at 95 yards. Lucky for me, unlucky for the pigeon I’d just come from my range and had shot the Impact at 100 yards. I knew exactly where to hold and took the shot knocking it off the silo. Farthest kill shot I ever made with an air rifle! Went into the barn and scared a couple more into the hay mow. Took me a minute to adjust to the light and found both sitting on a beam and dropped one at maybe 15 yards. The 25 cal really hits hard compared to my 177’s!

I walk my dog at night, we are experiencing a coyote population explosion.

Fairly populated area, don't want to use a PB. Just want to be able to fire a number of pellets quickly in the dark if the need arises.
I'm thinking a red dot ready CO2 would do the trick.

I usually am wearing a headlamp, so a gun mounted light wouldn't necessarily be needed.

I have the red dot. Any suggestions?

Thanks,
Bob

Athlon Argos BTR 8-34x56 FFP
Vortex Crossfire II 3-12x56
Optima 2.5-10x50
Tasco 3-9x40

All are used but in good shape.
Cleaning up. First 500 450 takes them ALL shipped! Not splitting up or taking offers. just moving them along to make room. Trades possible. This is less than I paid for the Athlon alone.

Air venturi Avenger in .25 with synthetic stock and 2 magazines and single shot tray
Donny Fl Sumo .25-.30 moderator
Donny Fl extender 1/2-20 A70 and thread protector
Vortex Diamondback 4-12x40 BDC scope with generic mounts
Four Uncles 4500psi pump with couple of spare filters
CVLife bipod

thats about $900 bucks plus shippings and or taxes

Its about year old, factory regulated, no damage

Price: $600 TYD

845-413-6380 text me at

Only possible trade would be a compact sized .177 PCP or towards high quality scope

I think mine will be a Coltri MCH6 compressor. It kinda hits a high end sweet spot for airgunners since Alkin raised their prices, and I'm tired of maintaining and repairing the (cheap Chinese) water cooled compressors. Of course Shot Show 2023 just ended - lots of goodies coming soon - so...what's your next purchase?

Air Arms S410 for sale in .177. Right Hand Walnut Stock. Beautiful stock. $850.00 plus shipping. Comes with 3 magazines. Already changed over with a foster fitting for quick fills. Will send any replacement O-rings that I might have laying around as well.

used for about amonth... $1250, paypal F/F or you add PP fees.....shipped USPS priority with tracking

Somehow, l managed to lose the washer under the front trigger guard mount, that spaces it to let the bear trap device move freely. I have a lathe but don't know the deminsion of the washer. Anyone know the diameter and thickness of this washer? Thanks for any help. Don

Thinking about placing a order soon with Krale.
Are there any import charges or is limited to how much you spend?? Thanks.

Im considering a used SCBA (not SCUBA) tank to fill my 250bar 3625PSI PCP Tank For an FX impact PCP rifle. The gun uses a foster style connector.

Any recomendations are gotchas to look out for when buying a used scba tank

I found this used just curious if this is using a fosters connector? What if anything would have to be done to the SCBA bottle to make it work for a PCP filling station.

Would something like this work?

Beeman Tempest .177 that made in England. The Tempest is in very good condition, not shoot much, it needs brake in, it has handling wear with no box or papers $250.00>$225.00. shipped CONUS.

* SOLD * The Beeman leather holster is SOLD.

Sale for the US only. Prices include USPS shipping.
PM or email at [email protected] for QUESTIONS.
I will take Paypal F/F or USPS money order.

In the last few days I've seen television coverage of airguns being enjoyed by more 'diverse' groups than ever. ?

My favorite news channel showed a video clip of Taliban members enjoying a friendly shooting competition with a spring-piston rifle (held together with electrical tape, no less).

The very next day an episode of one of my favorite Reality TV programs that chronicles police work in the U.S. was titled 'Pellet Gunman'. Was it not one of my favorite television shows I'd consider suing them; as the episode title is obviously a rip-off of my AGN screen name! However, I've decided to channel my frustration in a more constructive direction by offering airgun lessons catering to these interesting segments of Humanity.

Doesn't it warm your heart to see airguns being embraced by such diverse groups as these?

I'm familiar with the requirements to transport an air tank on commercial aircraft. What about private aircraft? Other than advising the pilot and securing the cargo, I can't find any regs prohibiting transporting a bottle pressurized or not.

I project I just finished for my Impact.





The idea is to make a barrel starting with a liner as close to solid as possible. Here are the pieces before the whole thing is epoxied together.
The liner was slightly reduced in outside diameter on the lathe to 8mm. This was to make it a true parallel sided cylinder.
It’s in the picture on the right ,inside a 8mm inside diameter 10mm outside diameter cf tube. The whole 700mm liner end to end is epoxied in the tube.
The stainless pieces are all 10mm inside diameter so the liner can slide through.
They are all 14mm outside diameter and have a 12mm step. The second cf tub butts up to the 12mm step. It’s 10mm inside 12mm outside
The final cf tube is 12mm inside 14mm outside and goes over the step.
Finish barrel

The centre stainless section is of course for the cocking block to move against.

I’ll definitely do this to a few of my other liners. Cheers Michael

Acquired a .25 Uragán 2. Here’s a short sequence of what I’ve experienced ~

The balanced valve is, okay. The new reg works fine. I do like less cocking effort due to not needing a strong hammer spring as this is an easy to open valve. You basically tune this system with only the reg. The hammer spring tension seems to do very little. In fact, I bypassed the reg and put 235 bar on the valve and the same hammer strike that can open the 140 bar reg (as set from factory) can also open the valve with 235 bar easily.

I’ve heard AGT now has a dual barrel transfer port on some barrels. This U2 does not. I worked this single transfer port for better flow dynamics. Why? Because no factory, I’ve seen product come from shapes a transfer port for optimal flow! I upped reg to 160 bar. It is a non-choked 700mm CZ barrel.

I tested 8 different slugs. The 2 best are the Zan 41gr (948 fps) and the Altaros Smooth 49.5gr (880 fps). This accuracy testing was done at an indoor range at 100 yards. You may see in the below pictures some pellet tins. These tins are only used to contain slugs as that is all I tested being this is the projectile type for my intended purpose and reason for owning this .25 U2. The pictures groups are not cherry picked. They are what I achieve in a short compressed testing session. This is a no embellishment, just fact, no unicorn sighting post. I’ve seen and you’ve seen the fairy tales! Take it or leave it, I’m just sharing.

This U2 does have a slow leak! It is coming from the balanced valve. AGT has created a gen 2 valve which remedied this issue. I expect to take delivery of the gen 2 parts in 8-10 days. Cheers!

All prices, shipped to your door in continental US. Prefer PayPal +3.5% but will also accept money order or cashiers check. I’ve got lots of positive feedback here so buy with confidence.

SOLD - Speed Dialer, $40.



SOLD - Rear buttstock hook. Lots of room for adjustment up and down plus the arms are adjustable. $50.




SOLD …. Factory aluminum magazine holder. Will hold 4 mags on each side. I will try to post pics tomorrow night. It’s like new. $75.

I’m going to a camping trip near Lake Berryessa next week. I thought it would be cool to have an air rifle in my backpack for some target shooting. Not looking to break the bank and a good price.

Let’s try to keep it around $100…would prefer even less than $100

Hey y’all so I’ve narrowed down the next airgun I’m going to get to either the kral empire xs or the Artemis p35. I know they both can come with their own set of drawbacks, but at their price points I think they both have a lot to offer. In my opinion the empire xs is one of the coolest looking airguns I’ve seen and think I’m leaning towards it. The only other option I have on the table rn is the new avenge x bullpup but will have to see it in action to know how I feel about it. Any feedback on this would be appreciated.

Hatsan AT44QE plenty of use marks, and I can't hit soda cans with it at 50 yards.
Want to have a bit of fun, or just get frustrated? This is your gun. lol. Doesn't leak and comes with 6 magazines and fill probe.
200 now 150 SHIPPED Conus only.
Trades considered,