I’ve simply got too many slug guns and not enough time for all of them. This M3 came to me new as a pellet pusher, but I had Utah Airguns convert it into a powerful slug shooter.

• Impact M3 with bronze receiver
• 580cc carbon fiber bottle (250b)
• Dual regulators
• .22 caliber 700mm barrel
• .22 STX Heavy Liner 1:16
• .22 carbon fiber liner stiffener (not glued in)
• .22 Slug Power kit installed (probe, hammer weight, spring)
• Barrel clamp kit (screws left loose)
• Kraford & Lypt KLS-3 butt stock and bag rider
• Kraford & Lypt Gigarail 2.0
• Kraford & Lypt Gen 3 Arca Rail (with picatinny adapter)
• OEM accessories: High capacity magazine, top rail, trigger guard, butt stock, probe/weight/spring, foster fill, hard case.

Very light use. Holds air perfectly. Set to shoot mid-weight slugs: 27g at 1010 FPS or 30g at 950 FPS. This barrel likes H&N, ZAN, and NSA slugs. The power wheel is set at about 3.25 so there’s plenty of room to increase the power if so desired.

M3 with K&L accessories $1500
M3 without K&L accessories $1200

Price includes shipping to CONUS. Signature required. I prefer Zelle, Venmo, or PPFF, in that order.

-Michael

Sold leshiy and getting out all together. Pick up in OH 43724

$550 for both. Not interested in splitting but would consider shipping just tank and case for 400.

Omega 103cc 4500 tank with carry case and fill whip. 9-2020 is date

Tuxing txedto32 compressor. Works great. Fills the tank from 3k to 44ish in less than 15 mins.
Have paperwork and extras it comes with new and some oil. Less than 2 yrs olds it’s minimal use.

I have a fx impact m3 and fx dynamic both in 35 cal I would like to sell. The impact comes with the gun, mag and a bunch of fx hybrid pellets if you want them. The dynamic comes with the short rail that’s on the gun and let long rail with the big front tank. they both are in great shape.
impact 1400
dynamic 1500
i will give a better deal if bought together.

This looks pretty sick I’m curious about that trigger and I like that reg mount on the back side of the “box mag style plenum” I don’t see hammer adjustment location? Maybe you guys can help me find it?…

The latest innovation in the DRS platform. Following the success of the DRS Classic a traditional
sporter rifle and the high-performance DRS Pro, which dominated its debut by clinching both
1st and 2nd places at RMAC PMC. The DRS Tactical redefines versatility with an AR15 inspired
design that meets the demands of tactical shooting enthusiasts.

Wondering if anyone has tried a K1 barrel on a gk1? Maybe cut down some to make a carbine? Also seems like the K1 air tube may fit as well? I wonder if it could be cut down some as well? Just thinking and a gk1 with a 12inch barrel and more air. Surely this has been tried...?

Just found out this new filter is coming soon to the US market.

40mpa/5800psi
Water drain
Two pressure relief valves, one from filter to tank, the other from filter to compressor
Strong magnets on the side to make it super easy to attach to your compressor.
Very well built and was heavily tested by GX before US release.

I'll know more once I can get my hands on one!

Video picture is just that.. only a pic, not the video

So my dad has a Stoeger X20S .22 that he says he can't get it to group worth anything, so he gave it to me to take a look at. Just cocking it sounded awful and the one shot I put through it sounded equally as bad. He did put a GRT trigger in it years ago, but that was it.

After doing some research, it seems that parts are few and far between. Between a new piston seal, spring, and breech seal, it looks to be close to $75 or more after shipping. Looked at a TinBum tuning kit for it, which doesn't include a spring or seals, and that's another $40 or so. All in all, I can't see dropping that kind of money into this older and cheaper gun.

I'm of the thought that throwing money at this thing is probably a waste. Thoughts?

I am selling my beautiful Leshiy 2. It’s a 25 cal with a 450MM long barrel.
Huma mod50 moderator with extra chamber and a hand guard.
2 magazines, original box, manual, and parts as shown.
I have 2 and have not shot this much after acquiring them in a package deal. It’s in like new condition as shown.
Asking 1825 OBO, shipped. PayPal or Venmo preferred you pay the fees.
Message with any questions or for more pictures.
Now $1725

I have been looking at a new air rifle and I am stuck on what to get. I am new enough here I cant message anyone in the sales forms. So i have been looking other places as well. I have about 1200 to spend. Ive been looking at the umarex gauntlet 2, the hatsan blitz, anything aea really but im really looking for more than one gun to maximize my bang for buck. I would be willing to pay more im just not confident in my knowledge of pcp air rifles. Air rifles are all i can use to hunt or shoot and i never thought id like them as much as i do. I currently own a gamo swam .22, hatsan flash .25, and hatsan bull boss .25. i have a umarex te4 smith and wasson and glock 17 as well. thank you

I really appreciate all the support from you guys on my 1st product drop. Reg Butter WILL make your gun perform better, especially in the cold! I take a lot of pride in this product and I've been making & using it myself for 20+ years. Now that I have the formula perfected, I'm offering it to the market at large. I already have a post about this in the classifieds, but I just dropped a video on my Reg Butter and here it is:


And here is the product description:

Have you ever done maintenance to your regulator, but wondered if you were really using the right lube? Everyone has! Because up until now there has never been a product specifically designed to lubricate high-pressure paintball and PCP airgun regulator pistons for competition-grade performance!

Enter Air Shootist’s Reg Butter! Designed by competitors – for competitors!

Specifically formulated for lubrication of pneumatic regulator pistons, Reg Butter is made from a proprietary blend of 100% food-grade silicone products to ensure safety under high pressure while providing the most buttery slick performance-enhancing experience you could ever expect to achieve from your regulator! Well-proven in competition, and one tin will last the average guy a lifetime!

Benefits:

• Faster recharge rates
• Better cold weather performance
• Lengthened maintenance intervals
• Enhanced longevity of o-ring lifespans
• Can be used not only for regulators but for all static & dynamic seals on paintball guns and airguns
• Non-toxic, noncombustible blend ensures all around safety

Pick up a tin today and rev up the performance of that regulator!

Usage directions:

• De-gas your gun and ensure there is no residual pressure remaining before disassembly!
• Disassemble your regulator, carefully clean off existing grease / oil.
• In case of any settling, give the Reg Butter a quick stir with an allen key or toothpick
• Take a dab of Reg Butter between your fingers and apply a modest layer onto your regulator piston head, taking special care to work a little bit of it in the recesses between any o-rings and the piston material. You can also butter up the piston shaft and even the Belleville washers or spring contact points.
• Reassemble your gun, gas it up, and watch your level of performance improve!

I just bought a fill adaptor from the dive shop, i brought my fittings and he made one for me from an old regulator to fill my rifle.It wasn't until i got to about 200 bar that I realized we forgot to put a pressure relief valve on it. now the probe is in the fill port and the tank is full to 225 bar and the scuba tank valve is closed. but no way to release the line pressure. what do i do now? I know, I feel like a complete Idiot. I know better. I dont know how to safely discharge the line to remove the probe from the fill port. please advise.

This is a Gen 1 with some Talon Tune upgrades and moderator. Comes with .25cal and .20cal LW barrels, both are accurate. One tank w/ Hi-flo valve and one tank with low-flo valve and a BNIB Altaros regulator. Some typical signs of use. Last time I was shooting in .25cal was pushing 25gr at 1050. Install the Reg, will be less fps but more shots per fill. Have fun with both calibers!!

$295 + actual shipping to your location.

For Sale RWS Diana Model 54 Air King in .22cal.

** SALE PENDING ***


Gun has Diana Zero recoil Mount with mod done to it. Also has a UTG 4x16x44 Accushot scope mounted. Can sell without scope and mount if not interested-( without $500.00.)

Rate the gun as almost new condition, can’t find any marks on it. It’s accurate shooting gun.

Looking for $600.00 ( United States Postal Money Order)
No scammers , deal with reputable Forum members only -

What is your preference as far as looks are concerned for your rifles? In my opinion the Air Arms S510 in walnut is one of the most beautiful guns out there..zebra wood with gorgeous bluing.

Taipan Veteran Long .22 probably the most accurate airgun I've owned. Tuned at 920fps with JTS 18gr it's a laser beam. Story behind this one I bought it used. Didn't shoot good at all. Found clipping so drilled the end cap out and no good. Noticed the shroud was bent. Got a shroud for a Taipan Short and worked great. However still issues. Found a poor crown. Recrowned it and now it my best shooter. Few pressure marks on the stock, some imperfections in the finish on the airtube but otherwise nice condition. Has everything it comes with from factory, 3 total mags, 2 mag holder and cheek piece. $900 OBO shipped to your door.



Scope not included. No trades. More info and pics if wanted. Paypal F&F preferred.

What am I going to dooooo ?

Surgery on well torn up ankle today. Two floors down to guns and gear.
I’m good with crutches having spent 3 months on them when 14 ( like riding a bike)
Then 2 more months with a broken 5th metatarsal from motorcycle road racing
10 years ago. I’ll give it a few days though. Same shoulder done December doesn’t
make it easier.

Oh god feet in photos !

I'm still trying to decide on a "big purchase" new gun. I'm shopping .22 caliber and I want a versatile gun that is precise up to 100 yards.

I like the Evo a lot on paper, as I do most of my shooting at a range with benches. But I'm not sure I want to completely give up the idea of other types of offhand shooting due to its weight. I do like buying from an American company, especially if the USA starts trade wars with Europe. I like how Skout builds their guns for ease of service and repair.

And now the Red Wolf. I've actually held one (unlike the Evo) and it's very comfortable in the hand. I hear it's very accurate as well. I like how it adjusts automatically to changing bottle pressure. I don't know if the Evo does this. What I'm not crazy about is being stuck with one caliber on something this expensive. The accessories are also pricey - I like spare magazines.

I'd love to get some buying advice from those who have owned one or both of these. Thanks!

Curious if anyone else has ever experienced this. I mounted an Airmax 6-24×50 That had been on my TX for about 5 months. Won a couple matches with it. I took it off about 4 months ago because I wanted a dot reticle so I replaced it with a Sightron STac. I pulled the Airmax out of the gun safe and mounted it on my recently purchased LGU. I found the parallax knob almost impossible to move and it would not adjust. Now 2 days later I was putting it in the box to return and much to my surprise I found the parallel knob moves freely and works as designed. Crazy.

No Shipping Sorry I have 2 Yong Heng compressors..One is authentic yong heng and still works fires up ect..Im tired of rebuilbing it..Two complete yong heng single cylinders. Free will meet within reasonable distance.. My zip is 15473 Pa Perryopolis Thanks AGN Friends

Hello. Several members are into cutting cards with a pellet. I have had good consistent "luck" with my talon ss in 25 cal and my P Rod in 22 cal. But my Beeman 2027 in .177 will cut a card maybe 1 out of ten shots. I am shooting at 30 feet. I practice shooting at vertical lines with a sharpie and then cut cards. My question is what .177 pcp pistol do you have that will consistently cut a card in half? ( See photo ) I am considering a crosman 1701P? Anyone out there with a 1701 that will cut cards? Any recommendations? Thank you. Dan

like new condition, no leaks and is a tack driver. Comes with Scope and suppressor. 2 magazines and extra rear stock to make it a dream light. Asking $1100 obo shipped and insured. WILL SELL AIRGUN AND MAGS FOR ONLY FOR 950.00 SHIPPED.

.22 Sonus suppressor $110 if want it with the Dreamline also. Any questions just ask.

Hey Guys! I bought a used Daystate revere .177 regulated from AoA. It shoots great, and overall a nice rifle to use. That being said, I do have a question about the shotcount. The regulator on mine is set to 160 bar, and from 250 bar, I get probably ~45 shots until I hit about 150 bar. (untested, need to actually do a shotcount one of these days). The numbers from AoA when they sent me the rifle: 5 shots, spread of 7fps, SD 2, minimum fps of 850 and max of 857, with a 10.3gr pellet. So about 16.52 to 16.8fpe.

I was wondering if this is infact, factory specs, or if I need to adjust the regulator or whatnot. My goal is to have ~19.5fpe with maximum shotcount. I feel that the regulator is a bit high for this powerlevel, but this is my first regulated gun.

If anyone has any experience tuning a revere regulated, please feel free to reach out