I got this gun off AOA, might have paid too much but I don't know. It has a Maccari tune kit. Papers from AOA showing just under 12 ft/lbs using H&N FTT 11.42gr pellets. I thought that might be too low but man does this thing shoot smooth, I can't feel anything when cocking it and no twang that I can hear. It came with a Bushnell Banner 4-12 x 40 scope that I am going to have to replace. Not going to say it's junk but I want mil dots. So my option is to take the Hawke off the Hatsan and put on it and then the Bushnell on the HW50S and the original scope back on the Hatsan. I also got a Centerpoint 4-16 somewhere I could put on the Beeman but need high mounts

These were shot at about 50' on a table with a folded blanket to rest my hand on. These were the first shots on paper with the .20 so I'm sure there is room for improvement. I think it likes the H&N pellets better than JSB.

For the targets, I was aiming at the bottom right corner of the black tape. The Hatsan I aimed at the bottom right corner if the duct tape and they shot low.

As any of you that may have been following my previous threads know, I am a total newbie to the PCP world. Ive been researching a LOT of rifles, air supplies. etc and applying the guidance you fine folk have been offering to a clueless newbie. For that guidance I thank everyone who has helped.

Im going to do some more research on it, but I think Ive found what checks all my boxes and then some...the Skout Epoch. I plan to order directly from Skout, and am upgrading to the 580cc bottle, going with standard .22 barrel, and the EVO ARCA rail. Having said all that...the only thing about the rifle i dont like is the fact that its electronic, im old school and electronics just dont appeal to me. I would rather see a model without all the electronic bells and whistles with a reduced price...but i guess it is what it is, maybe i will change my mind on the electronics once its in hand. So, unless i find or read any major negatives on the Skout Epoch in the next day or two, I will take the plunge on one.

Anybody tried using these at the ends of the spring to eliminate twist in the shot cycle ? would it work ?
Sunday morning to much coffee ?

Airgun Technology (AGT) Uragan 2 - 600 mm (22 cal.)

LOWERED PRICE!!!!


INCLUDES:

• Element Helix 6-24 x 50 SFT scope
• Element XT scope mounts
• (2) Magazines
• Fill port adaptor
• AGT spare parts & accessories box
• AGT soft case case

Read my trusted seller and buyer feedback

$1,225 plus shipping & seller fees if applicable

It’s Sunday morning and I figured now would be a good time to do a bit of a clean up. Not what I would call spotless but at least I can see the top of my work bench. I really like the poly sheets from our local hardware store. I think they are how shower lining. Easy to cut to fit and being white , it sure makes it easy to find stray parts. Plan is to give the 9 x 12 a little love today also.

Let’s see them workshops , always looking to improve my setup.

I have an impact mk2 power plenum with X liner that I bought new. Never had any problems and has taken a lot of game and put thousands of rounds thru it. Last fall I had to rebuild the regulator. It shoots minute of squirrel head out to 70 yards, but it really opens up beyond that. Reg is at 80, valve is open producing 900 fps with no creep. Shooting 25.3 redesigned. Do I need more reg pressure? It doesn’t sound like it is using too much air and I get around 70 shots per fill. Barrel is clean. Any ideas?

NLA

Great condition Air Venturi Avenger Bullpup .177 in box. This is a a Gen 1.
Includes:
1 Great performing moderator (attached). Makes this quiet airgun even quieter.
2 Magazines
1 Single shot tray
1 Aftermarket Rear Scope Rail Brace installed
1 Original OEM stock baffled muzzle cap
1 Instruction book
1 Misc OEM O-rings and allen wrenches
$200 plus actual shipping (where allowed) or free local pickup in Dayton/Cincinatti area. Paypal, Venmo, USPS Money Order, personal check once cleared.
For additional $20 will include a DonnyFL Air Venturi Avenger Extender / Umarex Origin 1/2 x 20 Adapter A70.

(SOLD PENDING FUNDS)

I have several Chinese B3 air underlever air rifles of recent mfg for sale. They have a ding here or there but are solid shooters and ready for tuning or just plinking. I have two left in .177, $55 shipped each. PP ff or money order.

Selling my Benjamin Marauder Woods Walker
RTI Carry Case
Regulated with an RTI reg Belleville type
Hawke Vantage 4-12x40 AO scope
(I have the scope box but shipping extra)
Hill High Flow valve
1/2" - 20 threaded for moderator
Moderator with what appears to be carbon fiber wrapped
Buck Rail AR Stock (**duct tape fit)
Regulator and PRod oring spares
De-gassing tool
JSB 16 @ 680
JSB 18 @ 650
Asking $475 Shipped with Insurance
Sold As Is Works as stated - the regulator is still settling in.
1500 PSI to 1276 after 32 shots yet still shoots a ragged hole at 20 yards
Bottle is M18 x 1.5 and Adapter is Standard Paintball
Please ask questions as needed.

Well I upped my regulator and it slowed the pellet speed down.. What do I need to do to get the speed I want.. (900 with 22 gr) ? More hammer ?
Factory was 180 bar and 750 fps and I I have upped it to 220 bar...

Thinning my .22 herd. Shoots well, no leaks and is very clean. This has the collapsible non-folding stock. Bipod not included.

Includes the following:

-Commander XR Rifle
-Aztec Emerald 3-18x50 w/one piece mount and caps
-1 OEM mag
-2 JDMS printed mags
-Reseal kit

Asking price: $1000 as is and I cover shipping using OEM double-boxes.
Paypal F&F, Venmo and Zelle
Selling to CONUS only.

Thanks for looking!

Greg

I know this has been covered already for the most part but I’m gonna rant anyways. I was just looking at pellet prices , and it’s not like JSB is the only company that have jacked up their prices but dear lord, 30$ CAD for a tin of 500 x 16 grain pellets? 40$ CAD for 400 x 20 grain? We’re getting real close to rim fire money at this point. Next up is the MRD’s , why on gods green earth would there be 4 different pellets with basically the same name? Shallow, deep, light , grand ? Where are the original redesigns? I’m not even going to get started on the price of slugs. Simply ridiculous.

I’m going out to cast another few thousand 28 grain .218 HP BBT’s . I’ll size to my rifle and call it a day. I sure hope the new rifle likes them.

There are only three things that can be said about Charlie Frear at Georgia Airguns. First, he is a really nice guy. Second, he can totally be trusted to do what is right for his customers. Third, he can really make an airgun shoot.

The photo below shows my third airgun experience with Charlie. While there was one hiccup that he took care of without hesitation or question during the course of three transactions, this latest result is somewhat of a hybrid to effect both Charlie's and my accuracy demands.

This is a Kalibrgun Cricket II Tactical 60, featuring the barrel switched out from my previous Cricket II Long, powered tuned by Charlie to shoot the 18.1 series pellets. He also changed out the factory regulator, exchanging it for a HUMA.

The results are shown below with ten shot groups from my indoor 18 yard range of .04" and a 13 shot group at 81.9 yards in a light wind and rain shot earlier this morning. It measured right at 1" c-t-c.

The 18.1s are leaving the muzzle at 970 fps and I can get about 60
shots with a 270 bar fill.

I couldn't be more pleased.

No longer available

Hi, all:
I‘m gravitating more towards my spring rifles these days, and have decided to sell all but my Steyr pcp. Bought new from AOA in October, 2023, this is a really nice target or hunting gun that is tuned down to under 13 ft lbs, but of course, can be adjusted for higher power. It is easily capable of 1 MOA groups at 50 yards on calm days. the rifle‘s stock is nicely figured walnut, with no marks or imperfections I could see. I have included a Weirauch single shot loader plus the two factory supplied magazines, and have installed a Rowan front sling mount and a Bisley adjustable butt pad. Will also include a complete seal set for future maintenance.
I think the breech seal is in need of replacing but other than that the gun has had a pretty leisurely life and is absolutely mint.
Rifle will ship in the original box with all accessories originally supplied. I will cover insured UPS shipping to CONUS, $750 firm. I’m happy to answer any questions or to discuss by email or phone. Thanks.

(11) sealed tins of JSB Hades 22cal pellets. These are 500ct tins from the same lot sourced from Trenier Outdoors.
$15/tin (min 2) plus $5 shipping or $175 shipped for all.

(15) sealed tins of JSB Heavy 22cal pellets. These are 500ct tins from two separate lots sourced from AoA (6 tins) and Trenier Outdoors (9 tins).

$15/tin (min 2) plus $5 shipping or $220 shipped for all.

I have a problem with my M4. I was at the range today and have no pressure on the rear gauge. I was shooting the rifle at 250 bar on the front reg, 150 bar on the rear, front adjuster in front below the barrel was at the 4th line, hammer adjustment at 12 and the micro at 3.5. Rifle was shooting good. Then had a loud pop and burst of air by my cheek against the cheek riser. So where should I start looking? What might be the problem? This is my first PCP rifle.

No bipod ,scope, or scope rings are included.. the rest is included .. 3 mags + picatinny rail adapter .. $985 shipped 3 day priority.. reason of letting go .. I want a Corbin press. Something has to go .. PayPal ff or add the fees.

I received a new Taipan .22 Long ADF with 700mm barrel last week. Mounted a new DNT Optics FFP 7 X 35 X 56mm 34mm scope on this rifle. It is strictly for the bench and although I did not weigh it I think it is a little over 12lbs with the 42oz 34mm scope.

I plan to use it for 30 and 40Y Target Challenge and also N50 50Y targets.

Today, I shot it at 52 yards at my local outdoor range. Got there at 8:40am, and had the range to myself …..for all of 15 minutes. Saturdays are crowded typically, but I had about an hour with only me and one other shooter.

I met a nice young man named Andrew who was 26 years old ( I’m 71) and he had a huge interest in Air Guns and my new Taipan. He has an M4 Impact and seemed to be very familiar with air rifles. I meet some of the nicest people at the range.

Distance: 52 yards
Group shooting and testing with pellets
Ammo: JSB 20.83g Lights and JTS 22.07g
Scope - see above
Wind: 3-7mph, with a fairly steady 4-5 mph
No Flags today since I started with group shooting
SST only, no mags today

A couple of initial impressions:

Front cocking lever is sublime and much better than my original rear cocking .25 Long Vet 1. A very crisp cocking cycle. One odd thing is that sometimes it did not cock. But, I figured out that if I pulled trigger thru release after firing each shot, it went back to cocking fully every time.

Trigger - about 6-8/10oz as I requested from Tony. Perfect for me. Crisp 1st stage stop with buttery smooth 2nd stage release

The Taipan moderator is very good, but when I took my muffs off, it did have a louder hammer strike. NP for me, as this is a BR gun.

Accuracy - 1st outing but it is impressive at 52Y with a fair amount of wind. The 22.07g JTS did much better than the 20.83 lights. However, I know the lights shoot very well from Dillon’s recent review. Tony tested with AEA 21.9g at 30 y, ragged hole and a 10 shot string <10 ES at 910 FPS average.

I plan to use this thread to do some testing with other pellets and occasionally will post results for other interested parties.

I did like the original Taipan Long Vet 1 .25 that I purchased several years back, but since it was rear cocking and I am a lefty, it was awkward reaching back over my shoulder to cock it on the left side of rifle, for me anyway. .

Pics below:

Purchased this "We The Plinkers" Atomic package from AoA as a gift for a family member that wanted nothing to do with it when opened. Oops! I don't need another .25 cal rifle so here it is for sale. It's never been loaded or fired a pellet since its arrival from Arizona. I did dry fire a few times to make sure it's functioning normally. Holding air just fine. Comes with all the accessories it shipped with and pictured except the T-shirt and patch that comes with the package.

Also shown is the Savior 28" Classic Bag in green that is also unused and still in the wrapper. Items will ship in the packaging in which they were delivered to my house as shown in the pictures.

Here's the package at its current price of $1599:


I'm asking $1000 for the rifle combo (remember that includes attached 0db mod + Athlon scope) , $70 for the case or $1050 for both. I'll cover shipping using Pirate Ship.

I can take PP F&F, Venmo, and Zelle. I'll only sell in CONUS.

Thanks for looking!

Greg

Slinging the little 13 grain Zans 100 yards in the not low wind, well you have to work for what you get, but it is a whole lot better than 13 gr pellets CUZ i tried that a bit later.

First segment in my video on the orange top, my friend shooting his M30.
Bottom 2 rows me shooting my Two.
After resetting ( targets came off fridge ) on the way back i show our new needle target, that little hole at 75 M aint easy, at least not with the merciless wind we had lately.
'Also new targets Zip ties on a pole, you can shoot off the end 2-3-4 times before you go for the tie around the pole to clean it, at 75 M also not easy.

Second segment is the targets all shot up, my friend filled in the top line of 2" targets with this DRS

The bottom rows are all me with the Two.


FAIR WARNING : Wind noise.

Hi Friends. I was pricing out a Vulcan 2 and found a used Vulcan online for $895. Since that was only a little more than half the cost of a Vulcan 2, I tried googling what is different between them, and found absolutely zero references to the first generation Vulcan. Lots of posts/vids about the Vulcan 2 and vulcan 3, but none about the original Vulcan. Can any one of you fill me in? In your opinion, is the V2 worth the extra money?

Thanks in advance!

does anyone know where I can buy a BSA R12 CLX Pro Walnut Thumbhole PCP Air Rifle .22