new here just wanted to say hi.

Posting this compact cricket in 177 for a friend, he has buy n sell a few times here but since the last reboot since he don't used the page to much he has not been able to post .. Asking $950 + shipping pm for his information and phone.. he will consider trades ..

Last night I had a heck of a time removing the cylinder from my Steyr LP50. Is there a specific wrench thats designed to work on these cylinders w/o damaging them? BTW this the only gun I own where I need to remove the cylinder to fill it.

Weihrauch HW 100 in .177 caliber, 25 joule, Beautiful thumbhole stock like new new $1050.00 plus $60.00 to ship = $1110.00 This is a $400.00 savings over retail

includes two mags and a fill probe very easy to tune up or down for heavier or lighter pellets to increase shot count or reduce FPE; currently set at 12 FPE.

I also have the 2900 PSI / 200 BAR titanium air tube which cost $150.00 retail and saves you almost 3 lbs so add $100.00 if you want it.

If you buy the gun and air tube at $1200.00 i will pay the shipping insured.

for fastest response please text me
@
Rudy Smith 251-610-8582

paypal: [email protected]
Venmo: rudy-smith-15

Took the fx crown out to the farm for a little pest bird control.... Really like this setup

As the title says I need help. Been trying to tune my .22/600mm Panthera for days now. I am shooting 35gr NSA slugs, wanting them in the 965-975 range. I have tried about every combo of reg pressure to macro wheel to micro wheel i can think of. It will settle in nice for say 10-15 shots then it will start to jump the speeds all over the map. Sometimes as much as 15-20 fps. I am using the fx pocket chrony. I have the minimal return set to 10. I am about 400 slugs into it and getting frustrated as all get out. Please someone help. Thanks

I've been having a problem with my new Ghost similar to what @jasperjet is seeing. When I first received the gun it had some air in it so it wasn't leaking,great.
I dry fired it once just to see.. Loud, wow. well OK the reg was set to 150. I thought I try a couple of shots without doing anything. I ran a couple of patches through the barrel to make sure it wasn't dirty, they came out pretty clean. I put a SUMO on the end and loaded some JSB 26g pellets. Still wow loud and shooting at 1050+ on 18. Turning it down to 8 only got to 990's and down to min got down to 960's. I knew this thing was wasting a lot of air. I removed the tank, de-pressured and turned down the reg to what turned out to be 115bar. Back together and aired up and the first shots weren't much different still loud and 920's on min. So now I'm wondering if I need to change the hammer throw looking at @Franklink review. Well my hammer is not like his!
I didn't want to tear it apart at this point so I decided to shoot it for a while. I started shooting and the ES for 11 shots was 50fps. I put more air in (240) and the next shot was THUNK nothing?? I used a dowel to push the pellet out, nope not stuck, still in the breach, hadn't moved. tried again, same thing. I was shooting on MIN so I turned it up to MAX. POW speed back but only 960 or so. I shot a couple more and the speed and noise climbed back up. Something obviously wrong so I set it aside until I had more time.
Sunday I started taking the hammer out. De-pressurized just to be safe and took the barrel off to make it easier to work on. Well Crap nothing like Franklin's hammer. Someone said that the new guns have a 4 bolt back? Mine has 3. My hammer is 1 piece with no throw adjustment except for the 'L' bracket that is mounted in a V grove with 2 set screws, it can be moved but I have no idea how much does what. Now I get the spring and hammer out. What the heck is this? there is metal free floating inside the front hammer chamber that looks like 1/3 of a broken washer beat to heck. I can not tell what metal it is nor is there any other bits in there. No idea where the rest of that part ended up. Also the valve rod that the hammer hits looks a bit chewed up but I don't want to take it apart more.
At this point I don't think that is a stock part because there is no indication that it was ever attached to anything unless ti's part of the valve seat or something else in that part of the gun. Well I'm going to contact the vendor and see about getting an RMA and a new gun or refund.
FYI my hammer spring is .051 wire 1.98 inches long.

Photo 1 all the parts.
Photo 2 Hammer & bracket.
#3 Hammer & bracket.


#4 metal bit.



#5 metal bit sitting on top of hammer.

I have 6 rifles, all have a place, this is too powerful for any of my pesting permissions. This rifle took me to finals at the Northeast Airgun Classic back in april and shot 183-193 for cards, very very respectable! My first time shooting a 100 br as well. It is tuned for just under 70 fpe with 33.95 pellets and it loves them.

It will shoot MOA if you do your part.

I would like to trade for .25 caliber rifles only, something to turn into a dedicated bench rifle.

RTI Prophet, Raw , Crown, Taipan Veteran Long, Deltawolf, JSAR , will look at others, offer up worst I can say is no but I will say no to anything but .25 caliber.

Will Come in the plano hard case!

Will sell outright with case for $1475 shipped, and insured.

Paypal friends and family , feedback is flawless.

It is a used rifle, it is not perfect but it does show well for its age

Daystate DeltaWolf .30 caliber, 700cc tank, 2 magizines, PRS butplate w/monopad, PRS trigger front rail, “0” db Moderator, single shot magazine. Daystate original case NOT case shown! Found a slow leak.
I
$1500.00 shipped UPS Conus only

Wow and wow - My TM1000 is just back from Motörhead’s lair and it’s a dream to shoot - pushing jsb 13.43’s at between 808 and 818 fps.
I love the way it pops! I put the action into a RAW chassis stock and saved almost 3 lbs.
I haven’t gotten it fully setup yet, like my cheek weld, but wow and wow. So far the Hawke Optic is rocking it and together we nailed a squirrel in the back of the head at 80 yards from my little bench - not fair at all.

Kevlar..

..as opposed to felt or burlap inside a moderator?

I tried some burlap wrapped around some of the inserts in a Huma section and it audibly changed the sound signature. Was thinking Kevlar might work and last longer than burlap

Thoughts?

Was going over some old PM's looking up some info in discussions with other members when I saw the date / time stamp on some and it was like HOLY SH*T! That was 3 years ago? I remember it like it was maybe last year. Don't think so? Go access your PM's and scroll back to page 9 or more and see! Some will laugh, others will shake their head!

How can I edit or close a WTS posting?
I can't edit it but also can't close it. And there is no help post on top of the forum...

I have a .177 HW95 that I am considering swapping out the barrel with a HW95 .22 barrel from Chambers. Is this a good or bad idea? Will there be any accuracy or fit and finish issues? The rifle is basically brand new, less than a tin of pellets through it. Tom tuned it for 15 fpe and it shoots very smoothly.

OR

Start all over and sell the tuned .177 HW95 and buy a new from the factory .22 HW95 and have it tuned?

Which is the best option?

For Sale: 10 new, unopened tins of JSB .177 cal 8.44 grain pellets with 4.53 head size. $130 for the lot ($13 per tin) shipped to your door in foam cutout packaging. Payment via PayPal, $130 in my pocket, so send friends and family or you cover any fees. I will also accept Venmo or Zelle. Prefer local pickup in DFW but will ship in the US. You can contact me via PM.
Thanks, Jeff Cloud

Does anyone actually know the deal? Have extensive testing experience? Are they all the same thing, or do they differ?

I've read everything from "AAs are a special die only used for their pellets" to "single batch run normal JSBs" to "pure white label, same damned thing."

What's the deal?

This tripod case fits 6.8 liter tanks snug its nicely padded on all sides, here is a link get the 25.5 inch long by 7 inches wide bag https://www.amazon.com/dp/B08L3RZGL3?psc=1&ref=ppx_yo2ov_dt_b_product_details

For those that have made the plunge, and that own other great air rifles, how does the Skout Epoch compare in terms of performance and accuracy? Do you own anything but .30 caliber? If you had it so do over again knowing what you know now, would you purchase it compared to other high end alternatives?

Thanks,

DZ

Hey everyone.
I ran across a guy by the name of Allen Zasadny. I know by reading forms that people love him or hate him.
So after several months, I was able to convince him to let me shoot some video while he talked about his favorite things, airguns.
I spent several days camping out on his dirt road while he finished up an FX Impact for me. I might be new to air but not firearms. I live a mobile life style so an airgun would make a nice addition. I'm tired of Karen calling the Rangers just to tell them I have rights when shooting. (You know how people are today about scary guns)
Keep in mind this guy has been working on air guns for nearly 40 years and he is turning 70 this year so he likes his privacy. It took a lot of convincing to get him to agree to make the video. If you have ever talked to him and he seemed rude on the phone. Then you should put yourself in his shoes for a day. He is building himself a house, PLUS the guy is turning 70 this year. So selling and building LOTS guns are not the first thing on his list. (Trust me, I wanted to build him a website. He doesn't want to deal with what it brings) He is verry picky when it comes to taking on new work. At the moment, he does most of his gun work in the evenings and through the winter months when he can't work outside. For a 70 year old guy, he will work circles around you. He works as hard as a guy in his 30s.

So enjoy the information.
I can only hope it helps you understand how you should think about your airgun.

Fx Crown MK2 600mm shooting .22 25gr pellets 920fps at 100yd benchrest. Had some crazy flights. It would travel most of the way to the target in a nice arch then the last second it would spin off crazy to one direction or another by several inches. It was very erratic. Didn’t happen everytime. Only a handful of times but it was enough to cost me points.
Im shooting the stock setup and liner. Wondering if the speed needs to be higher or slower as maybe it’s destabilizing then? No issues at 50yd, stacks em.

Is AOA the only place to purchase EVOL magazines or are there any other recommended outlets to procure them?

-PJ

Im going to PAC and will have this with me!

Have a gen2 Marauder i bought in the fall (Brand New, still have the box) for field target and ended up getting another rifle. This is a .177 with the Lothar Walthar barrel. Stupid accurate to where i was hitting a 1/4” steel target non stop at 50yd. Needs tuned now.
Only thing i did was carve out a small relief in the stock to access the transfer port like the factory should have. Its stock otherwise. Will ship in original box.
$490 delivered obo.
Would love to meet locally. Cincy OH but will ship too.
Includes 1 magazine.

No bipod
No scope or rings

Hey now AGN peeps,

I have two FX gauges 250 bar $30 each. $50 for both.

One wika 250 bar gauge $30

One 200 bar FX gauge that has seen better days – $15

And one leshiy 20 mm 350 bar gauge for $25 shipped.

If you want all gauges, you can have them all for 75 bucks.

PayPal, friends and family, shipped Conus.

Thank you,

James

949-363-3011

none I wanted to delete it but cannot find info on that

Dogs treed this chipmonk this morning. All I could see was his head.