Today’s podcast or video cast if you watch on YouTube is discussing the American Airgunner Challenge. Love the show and these podcasts. It’s like listening to a good audio book and an easy way to pass 30 min on the ride to work or while working at your desk.

Nina Rogers | The Airgun Experience Podcast

My wife gave me a cookie tray to shoot. So I painted a few dots and quickly filled with holes. Got the idea to cut in half.I opened it up with killer my HW90 .25 cal. Accurate and destructive. Once I opened the Center I brought out the R9 .20. Hammering the folded edges. I fired a whole tin of JSB 13.73’s. Brought in a Diana 48 .22 for about 50 rounds. Managed to open left side. This took over the course of two days. Finally finished off with R9.Cost 1 1/2 tins of lead = $45.00. Now garbage but a serious challenge. Crow

30.00 shipped used 1 time

Shot this on about 4 times. Air Arms SX510xs in .25cal with fill valve, 2 magazines, owners manual and OEM box. $1000 shipped to your door. Label with tracking provided same day as payments and shipping same day or next day as payment. PM me if you want to talk by phone. Two scratches on buttstock and one scratch on fore arm -see pictures.

What to look for on a used FX crown

Hi, I'm looking for a FX rifle, but I'm having trouble finding a guide on how the different models compare to each other so I can choose what would work best for me. any ideas on where to look ?
thanks !

I have been struggling with Panthera shooting slow on first shot( 20-40 fps slower), and only after sitting 5 minutes or so. Also shooting slow when cold. Someone suggested putting big power wheel on 4 and small adjustment on 4, then adjusting regulator to your desired fps or 10 over at most! It will sound like crap and use lots of air but all is good. Then turn small hammer spring adjustment wheel to where your gun sounds back to normal. You will see the small wheel going from 4 to 3 ( guestimate) and ft per second staying about the same, you want to keep going until ft/second barely lower ( within your desired ft/sec ). Accuracy will return and after 2 days sitting my gun shot a duplicate number over chrono and is much more consistent. I am shooting 500mm in .177 around 900 ft/sec with JSB 10.34 but should work the same with any pellet or caliber. To much reg pressure and not enough hammer spring results in poor results on first few shots, but also to much hammer will result in low shot count and bad accuracy. Find the balance! Happy tuning and I hope it works for you.

Shot this one maybe 5 times. FX Dreamline .22cal Black pepper Laminate stock with donnyFL FX moderator, fill valve, one magazine and scope rings in OEM box. $1000 shipped to your door and I ship quick.

I just shot me avenger .25 today and it seems like the trigger is a lot smoother than when I first got it

Why does a tin can (not necessarily aluminum, but heavier metal) filled with water, and is open on top, fly straight up (3 inches to 3 feet) when struck by a fairly powerful pellet??
Sure, the water inevitably shoots a spout upwards...but why does the can jump "up"? I can't quite figure out the physics involved ;-)

Barely used Alkin W31 upright with auto drain and auto shut off. Turned on maybe 4 times to fill portable PCP air tanks. $3,100.00 FTF in DFW or central Texas area. PM me for email or phone number. I have portable tank, pellets, 3 guns (listed on this forum), etc. Two hours on hour run meter

Shot 2 or 3 times, so Like new Vulcan 2 in .25 caliber. Rifle comes with: OEM box, OEM carry case, owners manual, accessory box with magazine, fill valve, extra o-rings, pin, key chain. Rifle has Sumo by Donny FL suppressor. $850.00 shipped to your door. I will be glad to discuss this rifle with you on the phone. PM me for phone number.

I'm a fairly new airgunner. I've had a Marauder .22 for a bit over a year now. At first I was fairly happy plinking within 25 yards; then I wanted more accuracy/challenge. And then more, etc. I added a regulator, Tim Hill internal parts, upgraded scope. There are still some things I think that I could do to it (polish barrel? Barrel bands? ) but at this point I don't know what the "bang for buck" would be.

Now, I have a target out to 60 yards. I could put targets out to 100yd in my back yard. The best accuracy that I have gotten is maybe 2" groups at 60 yards. I'm not a world-class marksman, but I've done some shooting with powder burners in the past so I don't think I'm terrible either. At that range I can watch the pellets going elsewhere than I have shot them, so I don't think it's me. I can understand groups opening up somewhat in a stiff wind, but this is even in fairly calm conditions. While I am still improving and tinkering, at this point it seems like I am more accurate than the gun is.

So I guess that I have a few questions,

1) What can of accuracy should I reasonably expect out of my air rifle at 60-100 yards? Is MOA within reason, or is that too much to ask for out of most air rifles? My accuracy seems poor.

2) If more accuracy is reasonably achievable, which is what I anticipate, how should I go about improving accuracy? Should I,
A) Continue to modify/work on Marauder (any recs? I will probably do this anyways, just to tinker, but should I hang my hat on this?), or
B) Upgrade rifle

3) If I choose to upgrade rifle, should I
A) Change caliber (would 25 or 30 be more inherently accurate at those ranges?)
B) Look into shooting slugs?
C) Any recommendations on rifle? I've been reading/thinking about the FX Wildcat vs RTI prophet vs BRK Ghost vs Avenge-X. Not sure which of those would help me achieve my goals (lots of bench rest but also woods walking for squirrels). I'm willing to "buy once cry once."

Thanks in advance for your wisdom

Well I have joined the ranks of those who have been scammed. I text a person that I thought I could trust. We agreed to a trade. What I got back was a rifle that had been stolen from brawler1588. I am in the process of getting his gun back to him. I will be out of the only air rifle I have. Impact m3 bronze with a bronze backbone and an extended bipod rail. The person that has is called himself John Cully at 506 heatherhill Rd. Columbus Ohio. Or Anthony Jarvis. Same address. If you have any suggestions for me on what to do next. Please text. Brawler is offering a very good price on his rifle but I doubt I can afford it. Hind sight is 20-20. 307-630-6531

Numerous fx guns that have suddenly appeared on eBay. Seller claims all are “refurbished “ saying fx USA went through them all replacing anything needed. Seller is in Wilmington N Carolina. Obviously we are seeing fx USA inventory hitting the auction site already.

Those with guns stuck there should go look and make sure none are yours.

Bought new in september from Utah air, have receipt. Will come with all factory parts
complete oring kit
misc spare parts
2 fx magazine
fx folding stock kit
factory stock
trigger has been set to a very crisp 1.5lb single stage
saber below the rail front bottle/dual bottle kit installed
Gen 2 Vortex viper5x25x50 tree reticle mrad pst with sunshade
Vortex scope level
Eagle vision adjustable rings
Silent thunder Ordinance high flow sarissa
magpull qd mlock mount on front
Adjustable mil spec ar stock with locknut.
Tuned shooting 65 grain avs at 966fps
Gun is located in San antonio Texas
Shoots 1/2” groups at 100yds
extreme spread is around 10
Gun will come with aprox $350 worth of .30cal slugs. Can send exact list to interested buyer
Gun currently has folding stock installed. Text 435-210-8817 for more info pics

$2450 loaded
$2000 for gun without Scope and rings

prices are shipped insured sig required tyd

I experimented a lot in the beginning of my PCP adventure, I bought a few AEA semi autos and I had a 50 cal bullpup, I had a few Hatsans. The AEA bullpup was fantastic but the semi-autos left a lot to be desired. I ended up selling all of them, now I have a Huben K1 .25 cal, a Huben GK1 .25, in my opinion the very best PCP pistol you can get by a long ways. And the jewel of my collection is the western rattler .35, Love how powerful that gun is in semi-auto. And I kept my .25 Hatsan Sortie for my kids to shoot. I spent a lot of money when I got into this hobby but I am really happy with the four guns I now have. I don't regret the money I spent at the beginning though because it was a learning experience, I had a lot of fun with all the guns I bought getting to the point I am now.

This rifle was purchased by me last year from Utah Airguns, and it is a fantastic precision shooter. It allowed me to shoot my 2nd ever 200 in the "30-Yard Challenge". Unfortunately, I have moved on to a different hobby, so this rifle needs a new shooter. The only modification from stock is that I added a front picatinny rail for a bipod.

Details: 500mm .177 barrel, will include a 0db Moderator .177/.22 size, stock magazine, single-shot magazine, shipped in original box with manual.
Current tune: I had my best accuracy shooting FX 13.4g .177 pellets around 820fps. Reg is set at 100 bar.
Price: $999
Payment: Paypal only
Free shipping
Feel free to contact me with any questions or if you need more pictures. Thanks.

I was at the range yesterday I was talking about the Stoger X10 Rifle I got this week. While the rifle is accurate, the trigger and the original "factory" scope are crap.
The fine adjustments are just not responding to adjustments as one would hope.
A friend offer to give me a scope he no longer uses and I picked it up. While there are no mounts, the scope is still in very good condition with just a few minor scratched in its finish.
It is a Simmons model 1048 ( made in the Philippines ) 6.5x20x44 scope with turret adjustments. Midway USA still shows it on their site as a Whitetail Hunter scope.
What I like about it is it will focus from 30 feet to infinity.
It has a 25 m/m body and has coated optics and gas sealed. I'm not sure if the lens mountings will hold when the air rifle is fired?
I do have to buy higher scope rings from a seller, I hope they still make dovetail mount high rings?
Trash or Treasure?

OK back from the show ! This year was one of the best ! (too bad if you missed it !) . Many Many guns were ready to buy /sell /trade . This year Alkin compressor had the top model on display and a show special of $ 3300 ( i think i remember maybe 3200 ? take home price for the demo .
I brought home a Sheridan in very nice condition and a Diana model 60 (gliss system ) Both rifles sound and shot good at the out the back door range .
Will crony and score a target today .
edit : there were two other rifles on Mike's table i should have brought home but some how i didn't ???????????

Hey guys, one of my viewers left a comment that they want to buy a Rainson Sky in .25. Does anyone know if those have made it to the USA yet?
Where can he buy one? Thanks -Nate @ Airgun Channel

Continuing with my rifle maintenance checks this morning, and looking at the performance tests recently completed after sorting several thousand .25 MKI and MKII pellets to help me choose the pellets to use for this rifle’s maintenance test, the results clearly indicate what happens when everything is correct and within tolerance.

Sorted to a head size of 6.38 mm and within a 10th of a grain in tolerance, the ES was only 4 fps over 10 shots and the group sizes were significantly below the .18” moa at 18 yards.

I need some suggestions.

The short of it is I have a break barrel .177, .25 and .30. I've been getting away from the break barrels and moving to PCP So I bought an AEA 9mm, FX dremline .30 and an Air Venturi .25. I want a .177 PCP but can't find anything I like other than the air venturi which is the same as my .25. I really don't want two guns the same even though they would be different cal.

Any suggestions?

Thanks

WTS - Artemis P15
Very good condition - Like new with a upgraded shroud.

Great shooter and very accurate
NOT pellet fuzzy at all

Shoots JSB slugs 13gr very well +/- 18ft/lb
Great accuracy with JSB 13gr Redesign,s

Includes everything in the picture with origenal box, spare o,rings & tool kit.
2 Carm Magazines
1 Origenal Magazine
Singel load tray
3D printed bipod tube adaptor, Mag holder & bud pad
Fil probe Incl (Not in Picture)

$400 Shiped in the US

Text:
806 566 7190