Hi my name is Joe I’m new to air gun nation, getting into the hobby so I’m sure I’ll be asking plenty of questions In the future so thank you in advance for all your help. Also wondering if anyone has one of the sig asp20 with wood stock in 22 caliber. I’d be interested in buying it if Antoine has a spare they are finished with.

Hi,

It's been some time since the last post about Epic Airguns and I haven't seen any reviews about the model TWO.

They seem to be great airguns, but I can't find any info about them.

I was trying to buy the AirMaks Krait X, but all I read about them is problems. So too many money for a gun with problems.

Also, I'm looking the FX King, but in the past I had too many problems with FX.

I want a Christmas airgun, but I don't know which one to buy.

Any opinions guys?

Alex

Athlon Optics Helos BTR 6-24x50 in like new condition no marks or scratches of any kind. $300 shipped or make offer. Shipping to lower 48 only.

Element Optics helix Rifle Scope 6-24x50 SFP MOA reticle

In like new condition no marks on it at all will include small side wheel.

$275 shipped or make a reasonable offer.

Shipped to lower 48 only.

Hello, I got a decked out RTI Prophet 2 high power .22. With a large 500cc bottle, bubble level, LDC, and shoulder brace. I build the gun for American Field target but never ended up using it. It is currently shooting 25.39 jsb about 1030 fps for 60 FPE with a long range pellet barrel. Regulator is set at 160bar, i dint recommended going any higher that that.

I spent a lot of $ on this thing, hopefully someone will enjoy it.

I forgot to mention it got a long range pellet LW barrel in it.


$1200 or best offer. Free shipping to lower 48. Paypal Friends & family or Goods but add 4% for fees

In the recent year I’ve evolved from break barrel, to very entry level pcp. I’ve always had firearms, just now adopting air rifles.
currently I have a Airmaks Katran C “dark camo” in .25

looking to step up to the FX King. i have 1 acre of property in corona, CA and will use my .22 or sometimes my .25 with thermal scope for pest. I have around a dozen fruit trees that the rats love, I also get gophers that seem to come in batches. In additionalply I do hunt coyote, squirrel and rabbits hunts with a .308 or 17hmr rifle or .22LR rifle. Looking to replace this with the FX. I would probably keep my ATN Thor thermal scope on this rifle.

current undecided questions.
1. .30 or .35???? Is the difference that substantia

2. 500 or 600mm barrel. The 600 is setup for slugs. I see all this hype about slugs, are they worth it? I would not try to interchange between pellets and slugs, I would set the rifle up, tune it and leave it as is and shoot the same ammo type.

3. my .25 Katran gets about 1 1/2 magazines per fill before the pressure affects accuracy. I would like to have a way higher shot count with the FX King. Was considering having a 700CC bottle swapped on to achieve this. Thoughts?

4. the Nordic wolf color has my attention but the brown loops very appealing also. Thoughts?

For sale out of my collection is a Hawke AIRMAX SF 30, model 13320, 6-24x50 scope with the AMX illuminated reticle. See box end photo below for specs.

This scope has been “babied,” only used on my Air Arms S410 shot on my indoor basement range by my granddaughter.

Is as close to new in appearance as can be for a used scope with no mount marks visible. Tracks as good as the day I acquired it. Has the original box, manual, extra set of scope caps, extra IR battery, all cap and Allen wrenches, and will be shipped in the original packaging.

The only thing missing is the side focus wheel as I have no idea where it is.

I have owned a half dozen of these over the many years with never one ounce of issue.

$330 via PayPal F&F shipped within the continental US.

Thanks for looking.

Have an FX M3 Impact Compact

The tuner seems to not really be of any help on this shorter barrel.

What is your experience?

Shooting pellets.... would slugs make a difference?

I’ve been working on a new project for the RTI. The Montster magazine holding 33 pellets in the .22 caliber.
The design is working very well. But it didn’t come easy. With over 100 changes, I’ve finally got a mag that’s working.
But im still in the testing stages while, I waiting on parts that I’ve sent out to have built. The prototype 3D printed parts are work well. But 3D printed parts.
can’t offer the reliability I’m looking for.
But 3D printing can offer proof of concept.
Here’s a few pictures of what it looks like.
Thanks for looking, Mont

Selling a Prod with folding stock, UTG 6x32 scope, Donny FL 1/2-20 adapter, 3 magazines and case. Also, includes a couple custom ports to better adjust tunning. It has been well taken care of and shoots great. Selling to upgrade.

$495 shipped CONUS - PayPal or Venmo, FF or pay fees.

My Walmart had these carts on discount row under $50 .. may make a decent pcp field cart if ones needed .. can't say if there on discount row at any other store or not

Great condition rti prophet in .22/.177 it was converted to a compact performance by a member here. It's a tack driver with either barrel.

Comes with the following.

Kraford and Lypt PRS buttstock W/Bagrider

The .22 is the rpb 510mm slug barrel currently installed, while the .177 is a LW 510mm barrel.

4 .22 mags (2 carm, 2 Orion)
3 .177 mags (2 Orion mini, 1 original)
.177 probe
.177 LW 510mm barrel
extended picstinny rail for a bipod
original rti case

$1000 shipped to lower 48 only.

Left cardboard target on backstop overnight, who do you think left me this calling card? Mark 2.5 feet up from ground. WM

Never will again either. Ordered some tins of pellets and they were placed in a thinly padded packing envelope with internal packing at all. I'm sure you all can just imagine what the post office did to them in transit. One tin is so beat up there's no way to remove the lid without cutting it open. Just an fyi. I love midway as I've been using them for many years but never for airgun ammo.

I guess this could have gone in the PCP forum!
Be sure to watch his two Youtubes. I would hate to be on the receiving end of this "air gun."

Just had a forum member leave my place here and wanted to post about it while I thaw out a little bit.

Wont name the person, he can pop in this thread if he wants. Saw a post by him last week and found out that we are not too far apart here and he is new to airguns and so I offered a range day here. I've offered similar to others and rarely get bites, perhaps I just smell bad...I'm not sure.

Anyway, he came by and brought his young son with him. Great folks and I think we all had a blast. I've never had kids. Had worked with kids for many years, but that was 10 years ago and very rarely ever got to SHOOT with a kid so this was a treat for me. They have a Gamo of some kind that they brought by and said they couldnt hit much with it. We spent some time just talking in the 'man room' before going out to the range and I mentioned that the scope may be bad or it may be a technique thing or could just be pellet selection.

So after a bit of yakking inside, we went to the range by my shop and I put 3 pellets on top of each other at 20 or so yards with that Gamo. OK..so the scope is good. Made a minor adjustment to windage and handed the kid the gun and after a little coaching on technique, he was reliably hitting small spinners at various ranges and even a welding tank cylinder cap at 50 yards with his gun. Just needed a little coaching on technique and the right pellets. Seeing his face light up when he made the first of what amounted to MANY hits was exceedingly rewarding for me. His dad jokingly said earlier to him 'maybe you just suck' after seeing me stack a few pellets...and in fact, it turned out that it was the pellets he was using that sucked rather than him...haha

They both were brand new to PCP's and had done their research on them. They have a couple Notos on order and are awaiting them. Good choice, I think so we shot my Notos a bit later to show them what they were getting. I went through a little 'class' on PCP's in general and had them shooting a few, up to a Texan 457, which was great to see as neither had actually seen a big bore except in videos. Was good to 'break in' a new airgunner and offer some knowledge. Very rewarding for me and they seemed to enjoy it as well!

Hopefully when the weather is better (was a bit nipply out today), we can get together again for more shooting and we'll shoot even more guns this time.

If there is a point to this post, I guess it would be we should share our knowledge and experience any chance we get. Not only does it help ensure the future of shooting sports by lessening frustration from simple things such as using 'pellets that suck', but also is just fun and rewarding.

Where is the best and cheapest place to buy 50 cal pellets for my Dragon Claw? New to air gunning and trying to get it all figured out! There seems to be A LOT to sort out and even more differing opinions! Thanks in advance for the help!

GRS Crown in .22 600mm barrel. Gun has the tungsten hammer upgrade. Scope, rings and moderator Not part of the sale. Comes in the factory case. $1800 TYD Now $1700 Now$1600

So I am looking and very interested in something a member has on here but he also has a second item that is slightly appealing. Is it viewed as rude if I were to ask for a better price if I were to take both? Generally when people sell cars and such they account for some wiggle room, didn't know if that is also the case with these kind of items?

AA S410 Walnut stock in .177 for sale. Comes with 3 extra magazines. $850.00 Very clean rifle.
Updated fill port to a standard foster fitting.
Let me know if you have any questions or need more pictures.
Buyer covers shipping costs.

I have a 22 and a 25 caliber. Both are equally accurate and work very well. Both have had triggers tuned to about 8 oz Pull. I have shot half inch groups at 50 YDS. both have extras. They weigh less than 5lbs. Shipped in original boxes. Only selling 1, take your choice.
If interested message me and we can work out all the details. I have lots of feedback. $400 shipped TYD

HW97K .177
I’ve been trying different springers.
I bought this one and I don’t think it’s ever been apart.
It has some extra holes in the dovetail from the previous owner
As I recall it shoots 14fpe. Jsb 8.44 @860FPS
$450 shipped

Thanks for looking,
Ken

I went hunting the other day, and I saw the perfect squirrel around 75 yards away, so I thought this would be a no brainer shot with my FX Maverick VP .30cal and my ATN X-Sight 5 5-25x LRF Scope. My groups with the FX Hybrid slugs at 100 yards are just over an inch, so I was not too concerned about my ability to take this shot, so I took my time and let the slug fly for a certain heart/lung shot that I'm so fond of.

To my surprise, I was not awarded with the thwack I've heard countless times before, and the squirrel seemed not the least bothered by my attempt to take his life in exchange for a place on my dinner table. So, now I'm second guessing myself. There is a slight breeze from east to west, so I decided to hold for wind 3 mil, and to my surprize and disgust, a brach just to the left of the squirrel's head exploded into splinters! That's it, I'm calling it for the day, as something is clearly wrong with my setup, but what was it?

• Did my new DonnyFL QD mount fail me in some way?
• Did I accidentally bump the barrel while I was maneuvering through the woods?
• Did my ATN Scope go belly up and not hold zero because of another bug I've uncovered?

After loading up the video of the shot in my video editing software, I conformed the 120fps footage to 24fps, and then added additional slo-mo effects to get this shot as slow as possible. Again, I am completely dumbfounded! How is it possible that I'm so far off on the horizontal (just under 5 inches by the looks of it), but my Ballistic Calculator has got the much harder horizontal axis exactly where it should be?

And then it hit me like a ton of bricks! I was awakened a few weeks ago with something walking on my roof in the middle of the night. Thinking this was either the Delta Force rappleing in because the country needs my help, or it was another pesky raccoon! With the sure money on a raccoon, I swapped out my ATN X-Sight 5 scope for my THOR 4 thermal scope on my Maverick. With no sight of a trash panda, I swapped the X-Sight 5 back in, and went to bed.

I am now convinced that the ATN QD mounts claim for return to zero are exaggerated, or are they really? What is considered proper performance for a QD mount that is true return to zero rated?

Can I expect 1/4 MOA repeatability at 100 yards with one of these pricy return to zero QD mounts like the Scalarworks or LaRue mounts below? Has anyone been able to achieve the repeatability levels I'm after with a QD mounted scope?



Or am I chasing a unicorn, and the only way to repeatably hit a 50 cent piece at 100 yards after detaching and reattaching my scopes with QD mounts is to do a zero afterwards?

Thanks so much for your time and input!!!

Almost new and it looks like it. The only smudge on the finish is where it screws up against the barrel. It is 1/2x20. Price is $125 TYD in the lower 48. PP F&F is fine.

I took out my old outdated MKII in .25cal from the safe today. Due to some health issues and work I had not shot this rifle in approximately 15 or 16 months. Both both regs were sitting where I had them set and the NSA 34gr slug hit where I had the cross hairs aimed at 55 yards. Maybe I don't need to buy the latest and greatest after all.