I'm selling this impact for a friend so when some decides to buy it or when it sells I'll have the person mail him the check and when it clears it will ship
M3 has tungsten hammer saber tactical front reg delete upgraded brass piston in reg with peek upgraded it to power block and installed a peek spacer in the plenum for first shot fix I have the rear reg washer stack set up for higher pressure I was able to sling 44 gr from the 25 cal slug barrel at 980 and had about 3/4 inch group NSA 44 gr slugs 800 mm 25 cal slug barrel and magazine 700 22 cal pellet barrel with probe and mag along with the 25 cal shrouds made by AZ i think this gun was used quite a bit but just got freshened up with new valve rod tunsten hammer orings power block which changes valve size also. 1300.00 shipped any questions feel free to ask thanks

This one got blocked by Youtube because I of course jacked the entire Voltron into, but let's see if I can upload it here as an "exclusive" for you guys!

Bummer, too, cause I had just made this bomb-ass thumbnail to go with it:



Basically I created a Voltron compressor by linking 5 shoeboxes together to fill a 4500psi SCUBA tank.... for science. On this channel I risk life and limb so you don't have to! Anyway, this was completely safe and worked. You're gonna wanna see this one.

Purchased this used from AoA about a year ago. Originally came with the long, 24.5" barrel. I bought a 410 mm barrel shortly after purchasing and added a Ratworks aluminum air cylinder which doubled the shot count and reduced the weight. Great shooting airgun. Super quite. Last shot string on 3/3/24: 756 average fps with JSB or FX 15.9, 74 shots (6 magazines+), SD 3.6. I've drilled a small hole to allow access to the hammer spring without removing the stock as shown in the pictures. Stock has quite a few scratches on it, but the metal is in good condition except for some marks on the end caps from when I replaced the air cylinder. Comes with everything shown in the pictures including the original barrel and six magazines. Two metal original Weihrauch mags and four from Alternative Mag, which I like much better. Scope not included
Priced at $850 shipped PP F&F or buyer pays fee. No trades

Hey so it’s new gun day for me, HW80 “long rang hunter “ .22 beautiful gun. Fit and finish is outstanding.

The problem I’m having is why does it make 13.5 ftlbs. The factory tag says so and so does the chronograph.

It’s not exactly the OG Magnum as described, so my question is what kinda power is everyone else getting? Also my HW77 only 6 months old is making 14 ftlbs so I’m guessing I must not be the only person wondering?

But a FAC HW80 that doesn’t make HW95 velocity I really could have save some money

my dad was my driver this morning when we checked our 2 330 conibear traps and the good Lord provided us a 100% successful harvest. One of the 2 year old beavers was still alive and I used my 20 cal hw 90 to finish the job.

177 Prophet compact

This is my last air rifle, this is painful, but I raised my right hand and I will fulfill my obligation.
It is a custom cerakoted red and grey, comes with 3 magazines, 4-16 Arken scope and a white eyler roller case. It shoots stupid accurate with Zan 13 grainers.

I am asking $900 shipped

Sorry no trades at this time.

Ripped this ugly little jerk out of my leg this morning. Probably the 4th 1 I have found in the last week between me and the dog. Looks like they are out in force this year. Got myself a full week of doxicyclene for lyme/tularemia potential with the bright red ring around the bite. Be careful outside.

I feel like an idiot for asking ? How do you watch a forum to completion ?

This Element Theos was originally backordered and finally arrived but only after the intended build was completed with the same scope found at another authorized dealer. This scope has never been mounted or removed from its retail packaging. The box was opened to take pictures only.

I listed this on eBay yesterday when I didn’t have access yet to post here. Definitely would like to see this go to a fellow enthusiast! That said, here’s the airgun nation deal:

$1800 shipped USPS Priority Insured lower 48. PayPal F&F or add fees G&S. Zelle is good too, local pickup in Los Angeles or Orange County.

Thanks guys!

-Ron

*edit*
I’m new to the community; this and the Sidewinder .22 are my first ads so I don’t have any feedback here yet. Please check out my profile on US Audiomart where you can see feedback and evaluate transactional integrity:

Max recently broke valve seat, JTS replaced under warranty, new one broke after a dozen shots. No response from JTS for purchasing another so looking for suggestions. Does anyone make these out of stronger material? Thanks, WM

Unfortunately, no time to enjoy. The rifle as shown was purchased new from Airguns of Arizona, quality controlled/assured, Athlon Cronus scope sighted and indoor range tested 9/30/2023. All items shown in the pictures are included. 3 extra mags (total of 4 shown), 5 tins of pellets, suppressor adapter. It has been laying dormant since taking delivery of the unit and only taken out for pictures to create this listing.

I listed this on eBay yesterday when I didn’t have access yet to post here. Definitely would like to see this go to a fellow enthusiast! That said, here’s the airgun nation deal:

$2300 shipped USPS Priority Insured lower 48. PayPal F&F or add fees G&S. Zelle is good too, local pickup in Los Angeles or Orange County.

Thanks guys!

-Ron

*edit*
I’m new to the community and this is my first rifle so I don’t have any feedback here yet. Please check out my profile on US Audiomart where you can see feedback and evaluate transactional integrity:

What’s your thoughts on a pellet sample? Looking for input please. Price etc.

MTC tactical Viper Pro 5-30x50 mm, comes with sun shade and covers, IR light not working $180 F/F Pay Pal

So after dealing with a substantial illness, I am feeling much better and I have decided to prioritize things I enjoy, as life is too short and it should be enjoyed to the fullest! I did a little pesting today and took a HOSP and a few pesty Starlings with my Maverick shooting the H&N Slug II .30cal. These slugs are wicked, and I can't wait to put them to use on some groundhogs!

I also checked the Ballistic Calculator with the ATN X-Sight 5 LRF to see if everything was up to snuff, and it's dead nuts. The slo-mo footage also let me know my zero is slightly off from left to right, so I will tweak that in the coming days. Enjoy!

I have a .22 avenger that’s a bit beat up and has a small leak. I replaced all the orings on the air tubes, but nothing else. I have the remaining oring kit that will go with the gun. Comes will the DonnyFL adapter, 2 mags and a sst. There is marring on the air tubes from the barrel band set screws and from using channel locks to remove the air tube components. Nothing too deep, so it’s still safe. The gun shoots fine, I just don’t want to deal with it anymore. $175 shipped.

A new and improved version of GX CS4 is now available through Alibaba and Amazon.
This one has a INTERNAL power supply, instead of the seperate, bulky external power supply.
No more seperate power supply, with wires dangling everywhere!
Its the "dash I" version, so GX CS4 dash I, or GX-CS4-I
Edit: Video added.

Not sure if you are able to slow this video down to see what the pellet actually does, but it blew my mind!
Rifle was an Air Arms S510 in .177, pellet is a JSB Exact 8.44gr doing about 813fps, zeroed at 35yards, usually a DEADLY combination, I’ve literally taken hundereds of rabbits with this set up, and never seen anything like that before
I have no explanation…

I was just looking for some .22 pellets on the Bass Pro and it says the are manufactured by Hatsan.
Only place I've seen where it say that.

Hi y'all
I just finished rebuilding the seals in a sweet old Daisy 880, shes shooting with some power now!
Only thing is, terribly innacurate!
Shoots very, very high.
Anyway, I was reading you can epoxy the barrel, as well wrap the top of barrel in electrical tape to fit snugger inside the shroud.

Question;

Where would one apply said epoxy to the barrel?
Does anyone have a photo or can anyone draw a red arrow on a photo? lol..

Thanks in advance. I really appreciate any help bringing this ol' American made Daisy back to zero

Selling it with the fx case.

The maverick holds air and has no mechanical problems.

I would also be interested in a huben for a trade.

Comes with hard case looking to get 1,100

This is a Rapid Air Weapons (not Worx) HM1000X LRT in .30 cal (serial number HM1890). Asking $1295. Will ship in hard case to the CONUS only. Scope/Rings not included. Comes with 2 factory magazines, O-rings, biathlon side lever, single pellet tray, and fill connector.

Located in Conway, AR in case anyone wants to meet locally.

I’m sorry for the THIRD post of this air rifle, but here goes lucky number 3….
Custom cerakoted .22 RTI Prophet performance 2
Package comes with .177 LW barrel conversion kit, with shroud, end cap, and probe, carbon fiber bipod, Element helix 4-16 MOA, tacticam, rail extender, lots of mags and lots of ammo. It loves .217 knock outs at around 940.

Also posted on AGW

Asking $1100 shipped.

Living in a condo I no longer have my shop bench and very limited space so you make do with what you have!